Gear Breakdown - Real Estate FPV
Вставка
- Опубліковано 2 сер 2024
- This video is the first video in a series where I show my process and equipment setup for real estate FPV projects.
LOTS of videos planned for this playlist, be sure to subscribe and keep an eye out!
How do you guys think the DJI Avata will be for indoor FPV?
DJI Avata: click.dji.com/AB1INXHhMDX0AWL...
Backpack - bit.ly/39E11vq
Nanuk 923 Case: www.bhphotovideo.com/c/produc...
Goggles - bit.ly/3OnODP2
iFlight Antenna - bit.ly/3bgORt6
Ethix Mambo Controller - bit.ly/3n7JFKs
Cinelog25 Build:
Cinelog 25 Frame - bit.ly/3tNkwsk
JHEMCU FC - bit.ly/3bf5vcz
HGLRC Motors - bit.ly/3n2xTkL
Gemfan D63 5 Blade Props - bit.ly/3n2tRJ3
Caddx Vista - bit.ly/3baMN5K
GoPro 8 - amzn.to/39yIa5f
Naked GoPro 8 Case - bit.ly/3xCp8ms
Shendrone Squirt V2 Build -
Squirt V2 Frame - bit.ly/3bhcIc9
Mamba F7 20x20 stack - bit.ly/39GUJvd
F1507 Motors - bit.ly/3tJpG8M
Gemfan D76 5 Blade props - bit.ly/3xLN8DM
Caddx Polar Vista - bit.ly/3zTunke
Holybro Kopis 2.5" - bit.ly/3n0zYh0
Holybro Kopis mount: www.thingiverse.com/thing:513...
Betafpv ELRS Setup - • Bye Bye FrSky - BetaFP...
Pavo30 Pro build video - • Pavo30 PRO - 6S Cinewh...
3D printable doorstop: www.thingiverse.com/thing:200571
__________________________________________________________________________
***Banggood Discount Codes***
www.banggood.com/custlink/v3G...
- 8% off FPV products - - - - Parts8
- 11% off For new customers - - - - - Toysho
- 10% off Eachine - - - - - BGEachine10
__________________________________________________________________________
Support the channel by clicking these affiliate links when purchasing parts at these sites!
RDQ - www.racedayquads.com?aff=58
BetaFPV - betafpv.com?sca_ref=1435233.qFHxUmh5f2
Banggood - www.banggood.com/custlink/v3G...
Starter FPV Drone Kit with everything you need: www.banggood.com/custlink/3Dv...
My Favorite Pre-Built Drones
Geprc Cinelog 25: bit.ly/3ikKDRa
BetaFPV Pavo 360: bit.ly/3IPimhT
iFlight Titan XL5: www.banggood.com/custlink/vvm...
Digital DJI System
DJI FPV Goggles V2: bit.ly/3qfTEzr
Caddx Polar Vista: bit.ly/3tsqTSp
Frames
iFlight XL5: bit.ly/3wfgwTr
Steele 5” Budget Frame (Apex Clone): www.banggood.com/custlink/mKG...
Flight Controllers
Mamba F722s: www.banggood.com/custlink/vGv...
HGLRC 60a Stack: www.banggood.com/custlink/vDv...
Motors
6s Xilo Stealth Motors - bit.ly/3fdnVqu
iFlight XING Motors - www.banggood.com/custlink/Gmv...
Emax ECO II Motors: bit.ly/34QovLv
Analog VTX/Camera:
Camera: bit.ly/3u2VJQl
VTX: bit.ly/3tiDKGv
TX/RX
TBS Crossfire:
ELRS rx: bit.ly/3CC661m
ELRS tx: bit.ly/3MWPUNc
R9M rx: bit.ly/3COm7Sb
R9M tx: bit.ly/3tst3Bv
Highly Recommended Tools:
Electric Multi-tool: www.banggood.com/custlink/GDK...
Soldering Iron: amzn.to/3q3pXku
Motor Grip Pliers: www.banggood.com/custlink/3Dv...
LiPo Battery Voltage Tester: bit.ly/3u97Ewc
Other Equipment:
My Backpack: bit.ly/3IeyY12
Naked GoPro Hero 8 Case & BEC: bit.ly/3yuWjI5
Naked GoPro 6 Case & BEC: www.banggood.com/custlink/vKm...
Balance Lead GoPro power cable: www.banggood.com/custlink/KvD...
DJI Air 2 S: amzn.to/3wfAxcy
GPS Module: bit.ly/3u3VTqR
QX7 Controller: www.banggood.com/custlink/vDm...
GoPro Hero 9: amzn.to/349z9Ju
GoPro Hero 10: amzn.to/3ILPAyC
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support! - Наука та технологія
This is awesome man! Been wanting to get into indoor real estate fpv. Super inspiring!
This is such an awesome breakdown, stoked to see the following episodes!
Great video. Very happy to watch this video. Looking forward to continuing! Good luck!
Thank you for making this series. You have inspired me to pursue this type of work
Nice! I could have used that for a wedding reception… got scared and didn’t fly due to the array of $40,000 crystal chandeliers
Love the video! Thanks for sharing your thoughts and gear list
Really appreciate your sharing your whole process. Been struggling getting smooth level flight on 2.5" quad, seems so much harder than on 5" . looking forward to more info on set up, rates and camera settings.
Put a throttle cap on your drone, it will make a big difference on throttle control, translating to smoother flight
Awesome video man!! Thanks for posting!
Thank you so much for all of your builds.
Looking forward to more videos on this series! Nice one 😎👌
Glad you like it! Editing the next one as we speak 🙌
Great video man, I am do tours as well and always use the squirt. Thinking about getting another smaller rig too.
Good stuff, thanks for posting.
Great info. I'm a travel and auto writer who uses a Mavic mini for basic shots, it's fascinating to learn about the FPV world and equipment.
time to save budget to build this kind of cool cinewhoop. you always make interesting content.. thumbs up.
I just bought this backpack and wasn't sure if it was a good one. So glad I watched this!
I love my Pitstop Pro!
Great video, really looking forward to more in this series! Also really curious on your rates and PIDs for the cinelog
Did a video on rates end up getting posted? search is not helping me find it :(
I would also be interested in seeing how your PIDs are? Trying to get a lot smoother on my altitude holding.
if you have a 3d printer, check out colorfabb for the LW TPU. It would be great for the naked gopro! its almost half the weight. Its called Varioshore TPU. They manufactured it specifically for RC aircraft (mostly planes). You should get better feel and longer flight times by a touch.
AWESOME VIDEO! Thanks
Thanks so much for this
Great Vid
Very useful. Thank you!
Thanks for the video! When will episode 2 come out?? I would love to add real estate tours to my portfolio and need to learn more about this lol.
Awesome 🎉
Great video and great advice! Thank you Sir!
Glad it was helpful! 🙌
Clutch advice with the doorstops!
Btw you get a sub keep spreading the knowledge brother.
Looking forward to the 2.5" fpv build! I offer real estate photos and want to offer drone videos too.
Your sir are a gentleman for sharing this insight, your videos are helping me up my game on fly throughs in general. I am really struggling with throttle control at slow speed though and I know its practice but even if I lock my left thumb and finger the drone still bobs up and down way too much, even with expo.
have you tried creating a custom throttle curve? I have found that I can really reduce that bobbing up and down when I create a lot of sensitivity around the hover point.
@@AdamVenturesTravel could you be so kind as to tell me how to enter this setting? I have a Cinelog20 and would like to solve the throttling problem
Awesome bro ! thank you very much ! It was fun to see my face in your video. ^^. I am personnaly switching to the naked gopro to fly with a full hero 10 as I have so muych issues with reelsteady and horizon lock in post prod. I will even try to fly my protek 35 indoor ^^. Thank you very much for sharing men, and thank you so much for the tips and tricks , you are awesome!
my english is too bad ^^I mean that I can't trust my naked gopro because I got issues with the stabilisation as you know, so I am flying a full gopro on my 2,5 inch cinewhoop, but I will also try to fly my protek 35, because there is a lot of wind in my region, and clients always ask me to fly near to the see or above water. ^^
I had to fly above the ocean not long ago and used my 5” for that then when I dove in towards the house I cut to the whoop. I think the protek35 will work good!
Great info and insight mate. 👍 load.of inspirations. 🙏🏆
Thank ya! Loads more to come 😉
need this in my life.
Yeah the 95x v3 is very front heavy. So when I put the hero10 bones it got very very front heavy. Thinking swapping to cinelog25 but was going to analog to save weight to carry hero10 bones
Thank you so much for that series !i am really curious on you’re tune for the cinelog 25 I rock the same but I use DJI fpv instead and a action2 , do you have a time frame for your tune and beta flight videos ? Thank you again
I built a custom 2.5" drone I carried full size hero6. Lasted a year before burning AIO esc. I used RCinPower 1207 motors.
I should build my own but that motor too tall I'll need make landing pads again lol
Great video. I'll have to check out some of your work. I've noticed a fad of people doing FPV tours when really they'd be better off with a gimbal and mirrorless for better image quality. Well lit houses or houses with big open spaces definitely look cool with FPV.
Agreed 100%
Since building this business I've definitely seen my fair share of properties that would visually look better if filmed with a DSLR on a gimbal. I filmed a 900Sq Ft Condo a couple weeks ago that would have looked 50x better with a DSLR.
I think the main thing that keeps realtors coming back no matter the size of the property is the fluidity of the camera and how it just glides through the house seamlessly. It's easy to follow and hard to lose sense of where you are when watching.
My personal touch is having the drone go out a window to end the video and make it even more unique 👨🍳🤌
🔥🔥🔥🔥
I absolutely love your real estate tours 🤩! Could you please let me know the frame rate and shutter speed of the GoPro you're using?
Great video!! I'd love to know if you did a video about your betaflight tune/ settings, or if you have those posted somewhere? Subscribed!
This video will be coming out in the next couple weeks!
Super interesting! Def earned a sub! Keep it up! :D
Thank you! 🙌🙌
this is exactly what I've been thinking about doing! where and how should it get started? I've been flying drones for about ten years but I don't have FAA Part 107 License or not lot of experience flying FPV
I kinda of wanting to get into the real estate part. I was wondering how it war working out for you. I have been flying drones for years now but I am getting up there in age and dont want to race. But thought this might be a good hobby or part time job. Also I have a degree in Videoagraphy and Business so that might be a plus for me.
Awesome
Nice video! Do you fly with angle mode on with air mode on or just fly Acro mode whilst flying indoors?
Hi! Excellent video! This type of flight I was looking for but I wanted to be able to go out and not suffer so much from the wind, would it be possible to mount this same electronics and engines on a cinelog30, if so, which propellers would you recommend?
i would love to see the setting that you use on your gopro!
Thanks for the tips, do you think that with standard dji transmission you can get good range indoors, or I should directly buy a drone with crossfire ?
Amazing informative video! About that smooth flights in real estates - do you fly in angle or full acro mode?
awesome video! this information is really handy for a newbie like me. Question. What angle do you have your camera? that is the camera on the drone not the gopro.
I am trying to get that slow forward momentum but I think my angle is not working... and I need more practice hah
Awesome!!! I’m slowly getting into this world!! Been flying for 9 years but finally deciding to make it work, any pointers?
so sweet! what rates do you use on this for the cinematic look?
thumbs up! i have same question with Kostas Gur :) are you flying in acro or angle mode? thanks.
You've got that drone house tour so dialled, well done! I'm sure that 99% of us couldn't fly as well as what you can. However, what's the difference between the JHEMCU flight controller and 3600KV motors compared to the stock Cinelog 25 FC and motors?
Thanks for the video. Please tell me, which ND filters you use for your naked Go Pro 8 in sunny weather. Where can I buy them?
Hey! What are the stubby antennas? Thanks!
Nice video, well thought out. For me, and for the drone side of my company where real estate vids are concerned, I will only fly FPV in a house that warrants getting shots that I can't get with a gimbal. And even at that, if the foyer doesn't have a balcony, or vaulted ceiling doesn't have a view overlooking a great room my Osmo Pocket 2 is going up on a mast. Now, that being said, COMMERCIAL warehouse, factory, industrial real estate, all day every day I will fly indoors.
Thanks! I've definitely seen my fair share of residential properties that would look much better filmed with a DSLR on a gimbal. I think the main thing that has been selling the FPV for the real estate agents is how its one continuous take and really gives viewers a sense of where you are in the house. A lot of the real estate agents just like the fact that I end the video by going out a top floor window to show off the backyard lol.
How do you like the Osmo pocket 2? I've been debating getting one.
@@TRONCATFPV I had the original and now the Pocket 2. Love it. Helps for the close up counter top & appliance shots where the mirrorless on a gimbal could be a bit clunky. Definitely is a plus again for areas a drone can’t go but the shot perspective is there to be seen.
And I totally get the continuous shot. I always try and tell the story of a property from arrival to relaxing with plenty of well intentioned speed ramps and whip pans 😂
Best to you and your business!
Thx for sharing. Do you have a link for your upgraded antenna? Thx
Hi! Could you give your pid rates used to fly the cinelog 25?
Great video! 👏👏
Thanks
Can you add gps or some kind of flight stability module that makes the drone hover at a certain hight without having to add ride the throttle constantly?
Would you have a link to the GoPro mount you use on the cinelog? I have the default one but it tilts too high up. Great video by the way, love it!
Absolutely!
www.thingiverse.com/thing:4892438
Awesome sharing you got here. Thanks a lot. Subscribed! Have you tried Diatone Taycan 2.5" I'm wondering if it can lift GoPro 8 Full or at least no battery.
Thanks! I havent tried the 2.5" Taycan but I bet it could carry a GP8 without a battery. Youll probably get shorter flight time though
Thanks for making this video! It's actually inspiring me to go ahead and study my butt off for the part 107
i need ur help please if don’t mind
i’m new to fpv
i never tried it before but i’m interested to buy one and start it
do u recommend iflight pro 25 drone for the beginner !?
What rates and expo do you guys fly for indoor acro modes? I am trying to experiment from my freestyle/racing one for some smoother where we dont really need acro full sticks in real estate vids.
Nice video !! Which rates and which gopro settings do you use??
Thanks for the video. If the opportunity arises, you should give a cage style frame a try e.g Lumenier QAV Micro/Freybott or the Hurricane 2.5. I have these and find them way better than my Cinelog 25, especially in the wind. To be honest it flies even better than my slammed squirt in windy days. Cheers
Good to know! I've had my eyes on the QAV micro. Thanks!
@@TRONCATFPV BTW I really should have taken your advice on door stoppers. Flew an elaborate line for a job yesterday only to have a door slam on me towards the end which ruined that shot. 🤨
@@mathewl7427 haha yup! here is the 3d printed doorstop that I use: www.thingiverse.com/thing:200571
@@TRONCATFPV awesome thanks
Nooo! Don't give away our secrets! ☺ Nice video man! You sure love the 5 blade props haha. Curious why you have not upgraded to a naked Hero 9 or 10 yet. Sure the 10 has overheating issues but the 9 is money
Lol, I do love my 5-blades on cinewhoops. I've just noticed they're SO much quieter but equally as efficient as a handful of triblades.
I am on the fence about getting a 10 bones. I want one but at the same time I anticipate GoPro to announce a new camera in september like they usually do and i'm hopeful that they include a "bones" version as part of the cameras release. If they let me down i'll probably just end up buying a 10 bones.
How do you think it is possible to achieve such accuracy of flights as you have if you use Tango 2?
Whilst Vista is installed is there an advantage to using A N Other controller rather than the native DJI Mode 2, I wonder if I am mssing out on something (control smoothness) by uisng the mode 2 vista connection?
great video! where can I see your cinelog drone build?
👌👌
I would be highly interested in tips for altitude control/throttle management :-)
Subbed btw
Yes, this will all be included in the 2.5" drone build 😉
Subbed - Awsome video. Watching the rest now 😜 I too fly the Cinelog 25 as it comes, can you reccomend some rates for this type of flying! Thanks.
yessir! I'll have a future video coming out that talks about rates and tune 🤙
Great Video, looking forward to the upcomming ones. I am interested in pids and filtering of the cinelog25. I have nearly the same setup and with gemfan 5 blade props, i got some really bad vibtations... idk how solve it, neither finding solutions on the internet
How is it within POST? Do you use realsteady?
@@nerf4885 in Post it is do able but you still see jitter / little blurry shakes in the video
Great video, thank you! Very inspiring! Please share the price range for this kind of project. It may be different here in Europe for me, but still... I have no idea how much money to charge for a job like this.
It really vaires per project and I normally go off of the properties square footage. larger properties obviously will cost more. If youre starting out, do a couple for free. It will be easier to sell to clients once you have proof of concept videos 👌
try GNB 1100mah 4s. You can get 10mins of flight time on your 2"
Are these the DJI FPV Goggles V2 or V1? And what is your opinion for the iflight bumblebee cinewhoop with 6S motors? It is quite big for carrying a full size GoPro but, is it good for indoors flying?
can you make budget cinewhoop that can carry full size gopro?
Very helpful Video! By the way, that DJI Goggles skin looks sick. where can i find something like that?
Thanks!
www.decalgirl.com/skins/dji-fpv-goggles-v2-skins
They have some pretty cool skins 👍
great video. did you need anything special to make the ethix mambo work with the dii goggles?
Since they are completely separate links they don't need to communicate with eachother 👍
Sup! Do you use ND filtres when you start outside to inside ? thanksss
Admire your skill! That's amazing😍 One question: what mode did you use (acro or horizon) for real estate?
Acro 🙌
Other thing, is shendrones squirt good enough for indoor real-estate shooting. I bought it for this reason but I see that you are using cinelog25 (I was going for it) any advice?
Ciao! I’ve struggles with maintaining altitude during steady indoor tours. Any tips? Rates, expo, etc
Thanks for your sharing. I love your case, I wanna the one like this for carry all of my drone 😅😅 Can you share the link to buy it ? Thank you very much
Yes! I'll add this link to the description 👍
Nanuk 923 Case: www.bhphotovideo.com/c/product/1320309-REG/nanuk_923_1005_923_waterproof_hard_case.html
You call it wind, I call it ghosts lol. I’m a realtor getting into RE photography. That’s for the free game. What you think about the DJI FPV drone for RE?
When’s the pid settings etc vid coming?
heyyy i am so interested in lear more about this, where are you located in mass?
I've been looking to do a build with a smaller frame for sub-250 indoor! Wanted to ask why you're looking to go to 6s?
This was truly helpful. 👍. But if I wanna use full size gopro. What sizes of the whoop did u recommend? Thanks
Usually to carry a full sized GoPro you would need a 3" cinewhoop. I just build a 2.5" whoop that is actually capable of carrying a full sized GoPro, I will be releasing a build video for that drone in the next couple of weeks 😉
@@TRONCATFPV thanks. heard pavo30 was pretty difficult to setup, why u don't use that one? 🤔 . But pavo30 pro. Is it better flight performance? 👍👍😉
thanks for the great video! Do you prefer the gopro 8 over the 10? or just cheaper.
I've heard of naked 9's and 10's overheating. plus the 8 is smaller and alot easier to take apart. Been debating a 10 bones though 🤔
Hello!! Amazing video, where did you find that support for the kopis 2.5? Do you have any link for it or the model to print? Thanks!
I gotchu:
www.thingiverse.com/thing:5139883
Do a video on lead generation and getting clients interested in FPV drone tours!
Noted 🤙
I really love the idea of this for real estate videos but I have a question. Couldnt you get most of these shots inside residential real estate with a long gimbal shot? As long as your not going out windows and back inside or anything too crazy.
Most of the shots inside i'm sure you could replicate with a gimbal but even then it would be difficult to have the same movement and consistent speed as an FPV drone. I typically use a DSLR on a gimbal for slower more detailed shots.
The shots that go out the window and reveal the backyard are able to connect the interior space with the exterior and is one of the biggest selling points for real estate agents that I've noticed.
Hey TRONCAT FPV. Can You tell as where do You buy or how do You made camera anti vibration mount?
now this video comes up. im from nigeria and trying to pioneer fpv for real estate. my budget is not that huge and only just managed to order a squirt v2 along with goggles, controller, batteries and all. do you think i should be looking to order a 2.5 inch quad. was weary with starting with that as i have no experience with rigging a naked go pro to a quad and all.
oh great video by the way
Hi, why would you use a 5 blade rather then the 3 blade GEPRC ships with the cinelog25?
Hi
Thank you for the video. I am getting into fpv right now in future i plan to go for real estate fpv.
When you expect the new video of the 6s build to be released?
I just finished filming everything for that build a couple days ago and am now just editing. Hopefully will have it published in the next week or so 👌
@@TRONCATFPV Thank you for the reply i am looking for your video. I want to have 2 drones one for the job and one more for backup. I have the feeling that they are going to be the same and they are going to be from your build. Hope i will find the parts in Europe. I am from Bulgaria.
I like your google skin where did you get it?
Hi
Great video thank you! I can't wait for the 6s build.
I am beginner fpv pilot from Bulgaria. I plan to shoot properties here when i become really good.
I am interested what mode do you fly? Is it horizon/stable mode or acro all the time?
It looks insanely stable. I admire your skills :)
Acro all day 😉
@@TRONCATFPV omg i cant even belive it is acro
its look like too much smooth for acro my dude
you are so good bro i hope one day i can fly like you
? :D
Awesome video, thank you so much! . Do you have a betaflight 4.3 preset for your cinelog25? Also do you fly acro?
Always Acro! ☺ But in reality I am sure he does. Most do even for these real estate videos.
@@LZRFPV why would you fly acro indoors? If you hit a wall you basically guarantee that the drone will crash. It makes no sense
@@ToastyMcNuggetLuvr thats not true at all… I’ve bumped many walls and objects and been totally fine. You fly acro for the most control. Most of the big pilots that fly indoor real estate tours fly in acro. I am friends with many of them. Also, a good pilot doesn’t bump anything. Plus if you bump something the shot is ruined anyways so it doesn’t matter lol
@@ToastyMcNuggetLuvr Could also enable crash recovery in acro. It stabizes you if you hit anything just in case.
@@LZRFPV that doesn't make sense at all. You aren't doing Flippy floppy indoors so why not take advantage of angle mode? With acro, as soon as you start pitching down the drone is going to be very difficult to control that precisely indoors. Are you using some sort of special rates? I truly don't understand the whole argument of "you have more control" when in fact more control will just get you into MORE trouble.
why did you build your cinelog25 as opposed to just buying the complete? i noticed you used lower kv motors, is there a specefic reason for that? sorry for all the noob questions! great video by the way !!!
I prefer building my quads because then I know exactly how it goes together (makes for easier repairs) and I can pick out the equipment I want. The motors are a good example. I usually go with lower KV because I've noticed significantly less motor heat than with higher kv motors, especially on cinewhoops.
A big difference between my build and the stock cinelog25 is the Flight controller. Stock cinelog25 FC has only 20a ESC's while my build has 40a.
hey man any chance you can share that kopis camera mount?
great video
Yes! Thank you for asking, I meant to add the STL for that in the description. Just added it 👍
www.thingiverse.com/thing:5139883
gj!