I would highly recommend this product! This is high quality wiring and professionally done! Every since I bought my 2019 raptor 700r I’ve notice the fan hardly comes on and when it does I feel the heat on my legs already, at some point even sounds like boiling, changed from factory coolant to engine ice still the same. This product helped with it ALL!! definitely feel the difference in temperatures! Shout out to mrcuervo racing for this product! Thanks so much!
Finally got my 06 Raptor done last night. I had bought the kit awhile back but I figured I’d wait so I can do the coolant change at the same time. Worked out great. Your video instructions are spot on. Thank you!
I assume there is no possibility of modifying the ECU logic to signal fan relay sooner due to proprietary nature? Alternatively, wondering if a temperature sensor mod was explored to “trick” the temperature reading to be ~25* higher? Or perhaps that would have an adverse effect on other ECU parameters. I just ordered one of these kits :)
Is it possible to get the hose adapter tee double threaded so we can run a temp gauge on one side and the temp switch on the other just a thought thanks !
Yes, but the opposite setup, adding this switch to the temp gauge housing as the temp gauges are long . This can also go forward more and run both the gauge and this inline of eachother.
So if I install one of these kits, could I also wire a temp Guage from trail tech into the temp sensor from this kit? Or would I have to install a second temp sensor in line with this one?
Hi i have an issue my 07 raptor 700r fan is not turning on i put start power from the battery and it works i kinda tested the relay it clicks and stuff but it still wont turn on when it needs to
How accurate are these? I just installed it on my bike along with a trail tech temp sensor and the fan turns on around 190 rather than 200. But the temp sensor could also be off as well I'm not too sure.
Ive seen a lot of variaton on the trail tech feedback. I use to run the trailtech as well . Basically the feedback i get from many customers and from my own experience is the trailtech reads about 10* lower then a mechanical gauge. U can test and see what the On temp is with and without the Early-on ... 190 is still ok tonrurn on
Hey brother here big fan or your in Florida. Do you have any video on raptor700 chain adjustments I have a 2008 and I have seen many videos on adjustments but everyone kind off recommend different tension. If you don’t have one could you please told me how to measure and make sure my adjustments is right. Thanks in advance and keep up the good videos
i don't have a video on that but basically you want to run the chain Snug at it tightest point. . Basically as you push down on the rear grab bar and put the swingarm thru it travel you will reach a point where it is at its tightest then going further becomes loose again. make the adjustment and verify its snug but not taunt at this location.
Thanks for the quick response. I already tightened to the tightest point but because this is my first quad I think it still lose. I bought it used even the guy claim that the chain is new I want to make sure and buy a new chain if necessary. Is their any way to measure to see if I’m ok or I have to get a new chain. Thanks again.
The guy who posted this video is where I recommend he also gives the proper fuel map if you get intake and exhausts or anything else he specializes in these so no better place give him a call his number is on google
www.ebay.com/itm/275218174228?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=iMC5C2t_Qbm&sssrc=2349624&ssuid=iMC5C2t_Qbm&var=&widget_ver=artemis&media=COPY or call 951-743-6328
fan run time is increased. so yes the lifespan of the fan will be reduced,., but a fan service life is a long time and the elements(water and salt or mud) is the normal cause of failure. the fan ls one of the cheaper and easier parts for replacement if needed.
Hey I have been having Trouble with my fan not turning automatically I’ve been troubleshooting and have changed the fan motor relay and circuit breaker is there anything else that I have missed I have purchased one of your fan kit so I can try to bypass and see with ur temperature switch can fix my issue if there’s anything that I am missing please let me know I really appreciate it thank you
The fan is controlled by the ecu. The ecu gets the temp from the temp sensor. There is test procedures for the temp sensor in the book. Ive seen multiple Ecu fail where they stopped giving the output to turn on the fan.
MrCuervoRacing thank you so much for Replying i’ll check out the temperature sensor , if the temperature sensor is no good would your fan kit still work ? I already purchased one of your fan kit bypassed the temperature sensor and act like the factory temperature sensor? I’m not sure if I explained that correctly
Whays your number ive tried calling it out of service I'm building a big 5 2022 raptor700 I got empire industries exhaust stage 1 cam programmer and I want one of your plus 3 throttle body
Finally got my 06 Raptor done last night. I had bought the kit awhile back but I figured I’d wait so I can do the coolant change at the same time. Worked out great. Your video instructions are spot on. Thank you!
I would highly recommend this product! This is high quality wiring and professionally done! Every since I bought my 2019 raptor 700r I’ve notice the fan hardly comes on and when it does I feel the heat on my legs already, at some point even sounds like boiling, changed from factory coolant to engine ice still the same. This product helped with it ALL!! definitely feel the difference in temperatures! Shout out to mrcuervo racing for this product! Thanks so much!
Finally got my 06 Raptor done last night. I had bought the kit awhile back but I figured I’d wait so I can do the coolant change at the same time. Worked out great. Your video instructions are spot on. Thank you!
Great job well done man.. We will order one from ebay
Daniel I just added this fan relay to my raptor. What a difference it has made. What a great product! Thank You
Great to hear!
Great product, worked perfect! Fan kicked on at 200F as measured with my infrared thermometer.
thanks for the comment, good to hear you like it!!!!
Awesome product, great idea
Thanks
Daniel, make a video of the Spal fan and how to properly install.
I assume there is no possibility of modifying the ECU logic to signal fan relay sooner due to proprietary nature? Alternatively, wondering if a temperature sensor mod was explored to “trick” the temperature reading to be ~25* higher? Or perhaps that would have an adverse effect on other ECU parameters. I just ordered one of these kits :)
So I leave the yellow and red stripe wire in and just put the new wire next to it ?
Great looking product, I will certainly be ordering one. Thank you for posting.
Thank you
Nice! I would like to buy one of your inline kits. How do I do that?
I'm boutta cop this right now, great idea sounds like a sweet mod
Just got mine in today 🤙🏼
How you liking it?
Is it possible to get the hose adapter tee double threaded so we can run a temp gauge on one side and the temp switch on the other
just a thought thanks !
Yes, but the opposite setup, adding this switch to the temp gauge housing as the temp gauges are long . This can also go forward more and run both the gauge and this inline of eachother.
Just got hip to your channel Great info man 🤙🤙
Where can I get a kit?
Can't wait to get mine👍
Why would only my fuel pump come on when the yellow wire has positve? Nothing i do makes the fan come on
So if I install one of these kits, could I also wire a temp Guage from trail tech into the temp sensor from this kit? Or would I have to install a second temp sensor in line with this one?
Great question I’m wondering the same thing
Does the yellow wire need to be pin out? Or just lap it behind it?
Hi i have an issue my 07 raptor 700r fan is not turning on i put start power from the battery and it works i kinda tested the relay it clicks and stuff but it still wont turn on when it needs to
How accurate are these? I just installed it on my bike along with a trail tech temp sensor and the fan turns on around 190 rather than 200. But the temp sensor could also be off as well I'm not too sure.
Ive seen a lot of variaton on the trail tech feedback. I use to run the trailtech as well . Basically the feedback i get from many customers and from my own experience is the trailtech reads about 10* lower then a mechanical gauge. U can test and see what the On temp is with and without the Early-on ... 190 is still ok tonrurn on
Now could you still put an in line temp guage in as well or no?
Oh man I feel left out, my Cuervo 861cc doesn't have a fan.... at all 😕.... they weigh too much
hahahah, we can use it to turn on some underglow lights
Can u make one of these with a temp gauge on it
coming next week
If we already have a temperature gauge in the upper radiator hose, can this still be installed with that?
yes, it can be mounted fwd of the gauge with a short piece of hose between them , there is room in the harness to do so.
Will this work for yamaha grizzly 700?
Where can I buy this kit
I have them listed on my ebay store CuervoATV bor call 951-743-6328 email Sales@cuervoatv.com
Will this work on my raptor 660?
Hey brother here big fan or your in Florida. Do you have any video on raptor700 chain adjustments I have a 2008 and I have seen many videos on adjustments but everyone kind off recommend different tension. If you don’t have one could you please told me how to measure and make sure my adjustments is right.
Thanks in advance and keep up the good videos
i don't have a video on that but basically you want to run the chain Snug at it tightest point. . Basically as you push down on the rear grab bar and put the swingarm thru it travel you will reach a point where it is at its tightest then going further becomes loose again. make the adjustment and verify its snug but not taunt at this location.
Thanks for the quick response. I already tightened to the tightest point but because this is my first quad I think it still lose. I bought it used even the guy claim that the chain is new I want to make sure and buy a new chain if necessary. Is their any way to measure to see if I’m ok or I have to get a new chain. Thanks again.
@@jaimrez go up in tooth count on the front or the rear will give you some adjustability back.
I truly appreciate your help
Thanks
Being that it turns on now at 200 at what temp does the fan now shut off?
180
Where u recommend to get a power commander at for my raptor
The guy who posted this video is where I recommend he also gives the proper fuel map if you get intake and exhausts or anything else he specializes in these so no better place give him a call his number is on google
@@danielslobodyanyuk6067 cool thank u
Where can i order one, ebay link doesn't work
www.ebay.com/itm/275218174228?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=iMC5C2t_Qbm&sssrc=2349624&ssuid=iMC5C2t_Qbm&var=&widget_ver=artemis&media=COPY or call 951-743-6328
Hey silly question will this burnt out my fan quicker ? I’m most def thinking of buying this
fan run time is increased. so yes the lifespan of the fan will be reduced,., but a fan service life is a long time and the elements(water and salt or mud) is the normal cause of failure. the fan ls one of the cheaper and easier parts for replacement if needed.
Hey I have been having Trouble with my fan not turning automatically I’ve been troubleshooting and have changed the fan motor relay and circuit breaker is there anything else that I have missed I have purchased one of your fan kit so I can try to bypass and see with ur temperature switch can fix my issue if there’s anything that I am missing please let me know I really appreciate it thank you
The fan is controlled by the ecu. The ecu gets the temp from the temp sensor. There is test procedures for the temp sensor in the book. Ive seen multiple Ecu fail where they stopped giving the output to turn on the fan.
MrCuervoRacing thank you so much for Replying i’ll check out the temperature sensor , if the temperature sensor is no good would your fan kit still work ? I already purchased one of your fan kit bypassed the temperature sensor and act like the factory temperature sensor? I’m not sure if I explained that correctly
@@whyteboi0011 yes. We installed one already with a bad ecu
MrCuervoRacing awesome thank you very much for your help!!! And thank you for the videos and Products
Whays your number ive tried calling it out of service I'm building a big 5 2022 raptor700 I got empire industries exhaust stage 1 cam programmer and I want one of your plus 3 throttle body
a little pricey
Finally got my 06 Raptor done last night. I had bought the kit awhile back but I figured I’d wait so I can do the coolant change at the same time. Worked out great. Your video instructions are spot on. Thank you!