Hey man, I really enjoy watching your videos, especially builds and rebuilds like this. It's great how you get down into the technical stuff. A lot of guys don't do that, or at least they don't film it. Don't change your style bud! Great videos!
Thanks really like that kind of video actually I like maintenance and disassemble every parts put some grease more than driving but if there full metal gear and differential more fun like 1/14 truck I have all metal truck
Cool Information.. being from a racing background mainly talking go-kart efficiency is a must in the bearings.. Thanks for Sharing Brother.. ✌️😎👍 HFLPRCing
Nice. I found out despite the tight seals the Traxxas ones don't even keep out the water very well. I bought a cheap alloy gearbox for my SCX10 from Chinese Ebay and it was super smooth when it arrived. Looked inside and just a light oil over all the gears and metal shielded bearings. Not ideal for water and trailing but perfect for comps
yeah this mod isn't for everyone, I did however find out about an issue with all 3 of my trx trucks, the front driveshaft rubs the trans case under full compression. You may want to check that on yours. I will most likely make a video on it.
To get help with reassembling a RTR TRX-4 tranny, it helps to print out the manual for the TRX-4 Kit from the Traxxas website. This will show all steps in putting the tranny back together.
I can guarantee you that if you use the Xerun AXE 2300kv on stock gearing a GensAce 3S 1400mAh LiPO runs for at LEAST 1 hour if using the full light kit on the Bronco... If not running the lights I have push it as far as 1 hour and 30min of mixed trail/crawling, just did that yesterday running the no shield mod on the bearings. My usual 2S shorty 4200mAh can run for as long as 4 hours with no lights and 3+ hours with full lights.
Love the videos. Thank you. Question: where can I learn more about crawler competitions? Can’t seem to find any clear explanations or information on where to find them. I live in Wisconsin for what it’s worth. Thanks!
Well SORRCA is the biggest name in scale competitions and most clubs just follow their rules. If there are no scale clubs in your area you may need to start one. A simple Facebook group can work wonders.
Where are you in WI? I’m in Oshkosh. I’m not part of any club and have never been to anything but I believe there is a clup in the Oshkosh, Appleton, Fond du lac area. If your in the area ask about it at hobbytown in either Appleton or Oshkosh. They could help you out.
Exocaged RC not sure, haven’t tore into it just yet. I was referring to building s full on comp version of the Gen 8. TheTRX is bad ass, but I’d love to see the Underdog come in and put a hurt on them. 😈
I had planned on doing that. In fact a 4ws compared truck but their portals just aren’t strong enough yet and there is still a major lack of parts I’d need to make it tough enough to be reliable. The #1 issue with that truck are the top portal gear CVD’s and the arms on the portal cases. Aluminum cases are due out in a month or two but there is no timeline as yet for stronger portal top gears. I have a Gen7 with Gen8 portals that’s broke right now because I’m tires of buying plastic cases. In the end I chose the stronger platform to build with. Maybe once they Gen8 gets better aftermarket support I’ll build one.
Exocaged RC understand, want to give yourself the best chance. With the Gen 8 being so new, it’ll take a little time for the after market to catch up. The TRX is already on their 3-4th rendition.👍🏼
@@dezfan yes in time the Gen8 will be buildable to the same extent as the TRX but not yet. We have a Pro Class at the Barbarian Scaleplex and if you and your rig aren't 100% ready you will not finish the course.
Thank you for your video. Usually, what kind of grease do you use for gears? And in this case for the transmission do you use the same grease or a different one? Thank you so much.
I’ve been having no problems getting 45 mins plus with that battery on a trx4sport with about 11 oz added to the wheels and closer to 30mins on a heavily modded defender
thats great info, thank you! All I need is about 35 minutes on a comp course with an Axe so I should be good to go. Thank you for letting me know this.
I got that combo and ran it for 10+hrs at the uste, its efficient for sure but I'll be running the Axe for this one and from what I've seen with tests it pulls less amps than most anything out there so I should be ok
@@ExocagedRC I did finally find it. It's on back order. I'm challenging myself to build a trx 4 out of all metal with the new Trax that are coming out.
In the real world, if a bearing isn't tight on a shaft (almost to the point of requiring a puller) It's unusable and either needs to be replaced or the shaft knurled, same with the outer casing. I've never understood how RCs can utilize bearings which just slip and spin on the shafts rather than actually turn the bearings.
You are correct on how bearings should fit in the real world but even some of them are slip on in many places, in the RC world many people don't have the proper tools to press bearings on and off plus these tiny bearings are fragile. So it makes sense that they just slide on. The stock seals are so tight on these you could see where the shaft was spinning but the bearing was like a bushing
Hey man, I really enjoy watching your videos, especially builds and rebuilds like this. It's great how you get down into the technical stuff. A lot of guys don't do that, or at least they don't film it. Don't change your style bud! Great videos!
Thanks really like that kind of video actually I like maintenance and disassemble every parts put some grease more than driving but if there full metal gear and differential more fun like 1/14 truck I have all metal truck
Cool Information.. being from a racing background mainly talking go-kart efficiency is a must in the bearings.. Thanks for Sharing Brother.. ✌️😎👍 HFLPRCing
Nice. I found out despite the tight seals the Traxxas ones don't even keep out the water very well. I bought a cheap alloy gearbox for my SCX10 from Chinese Ebay and it was super smooth when it arrived. Looked inside and just a light oil over all the gears and metal shielded bearings. Not ideal for water and trailing but perfect for comps
yeah for comps and dry stuff I like the metal shielded bearings too.
Sometimes friction is your friend like when you browned out in the last video... BAHAAHHAAAAA!!!!
Just curious. Could you make a full video of how to grease and reassemble the Traxxas 6x6 transmission?
All my TRX builds are custom builds and I never looked at the bearings in the transmission. I use 2500 mah lipos though.
yeah this mod isn't for everyone, I did however find out about an issue with all 3 of my trx trucks, the front driveshaft rubs the trans case under full compression. You may want to check that on yours. I will most likely make a video on it.
I use TFL Racing drive shafts on all my builds.
@@twissted1277 I don't think I've ever ran a TFL driveshaft on anything of mine
nice video good man
Nice brother
To get help with reassembling a RTR TRX-4 tranny, it helps to print out the manual for the TRX-4 Kit from the Traxxas website. This will show all steps in putting the tranny back together.
i baught an alloy trans for trx4 and both gears were really free right off.
What brand
@@orion000 rc lions
I can guarantee you that if you use the Xerun AXE 2300kv on stock gearing a GensAce 3S 1400mAh LiPO runs for at LEAST 1 hour if using the full light kit on the Bronco... If not running the lights I have push it as far as 1 hour and 30min of mixed trail/crawling, just did that yesterday running the no shield mod on the bearings. My usual 2S shorty 4200mAh can run for as long as 4 hours with no lights and 3+ hours with full lights.
skirmich awesome awesome awesome man. Thank you!!
I get an hour to an hour and a half on a 1350 3s with axe 550 3300kv
Thanks for the info
Love the videos. Thank you. Question: where can I learn more about crawler competitions? Can’t seem to find any clear explanations or information on where to find them. I live in Wisconsin for what it’s worth. Thanks!
Well SORRCA is the biggest name in scale competitions and most clubs just follow their rules. If there are no scale clubs in your area you may need to start one. A simple Facebook group can work wonders.
Where are you in WI? I’m in Oshkosh. I’m not part of any club and have never been to anything but I believe there is a clup in the Oshkosh, Appleton, Fond du lac area. If your in the area ask about it at hobbytown in either Appleton or Oshkosh. They could help you out.
Need to do the same thing to a Gen 8.👍🏼
My gen8 came with metal shield bearings, are their rubber sealed ones tight as well?
Exocaged RC not sure, haven’t tore into it just yet. I was referring to building s full on comp version of the Gen 8. TheTRX is bad ass, but I’d love to see the Underdog come in and put a hurt on them. 😈
I had planned on doing that. In fact a 4ws compared truck but their portals just aren’t strong enough yet and there is still a major lack of parts I’d need to make it tough enough to be reliable. The #1 issue with that truck are the top portal gear CVD’s and the arms on the portal cases. Aluminum cases are due out in a month or two but there is no timeline as yet for stronger portal top gears. I have a Gen7 with Gen8 portals that’s broke right now because I’m tires of buying plastic cases. In the end I chose the stronger platform to build with. Maybe once they Gen8 gets better aftermarket support I’ll build one.
Exocaged RC understand, want to give yourself the best chance. With the Gen 8 being so new, it’ll take a little time for the after market to catch up. The TRX is already on their 3-4th rendition.👍🏼
@@dezfan yes in time the Gen8 will be buildable to the same extent as the TRX but not yet. We have a Pro Class at the Barbarian Scaleplex and if you and your rig aren't 100% ready you will not finish the course.
Thank you for your video. Usually, what kind of grease do you use for gears? And in this case for the transmission do you use the same grease or a different one? Thank you so much.
how do get the play out of the transmission do you get a special shifter. with the sport there is no play because it is only one gear.
I’ve been having no problems getting 45 mins plus with that battery on a trx4sport with about 11 oz added to the wheels and closer to 30mins on a heavily modded defender
thats great info, thank you! All I need is about 35 minutes on a comp course with an Axe so I should be good to go. Thank you for letting me know this.
I’m running a side winder 4 with a 3brothers Acis 3000kv the sport has the stock xl5 and Traxxas brushed motor
I got that combo and ran it for 10+hrs at the uste, its efficient for sure but I'll be running the Axe for this one and from what I've seen with tests it pulls less amps than most anything out there so I should be ok
The play between forward and reverse, is it normal. It seems that the spur gear turn halfway thru before it engage
I'm building one from scratch. I've managed to get everything except the input and output shafts, and can't find them to buy? Any advice??
I’ve never needed to replace mine but maybe buy a whole transmission of eBay for parts?
@@ExocagedRC I did finally find it. It's on back order. I'm challenging myself to build a trx 4 out of all metal with the new Trax that are coming out.
In the real world, if a bearing isn't tight on a shaft (almost to the point of requiring a puller) It's unusable and either needs to be replaced or the shaft knurled, same with the outer casing. I've never understood how RCs can utilize bearings which just slip and spin on the shafts rather than actually turn the bearings.
You are correct on how bearings should fit in the real world but even some of them are slip on in many places, in the RC world many people don't have the proper tools to press bearings on and off plus these tiny bearings are fragile. So it makes sense that they just slide on. The stock seals are so tight on these you could see where the shaft was spinning but the bearing was like a bushing
Where can i get a cool exocagedrc shirt?