$60 Amazon 3-Gear with Dig, Any good?

Поділитися
Вставка
  • Опубліковано 5 жов 2021
  • I gotta say this is a very interesting transmission!! Links below for this as well as the Vanquish Hurst Dig unit, use the links to help support Exocaged RC, Thanks!!
    Transmission on Amazon
    amzn.to/3FjTj4I
    Legit Vanquish dig unit
    Amain bit.ly/2YnABYN (Grey)
    Amain bit.ly/3uRaWUH (Orange)
    Amain bit.ly/3mpi7Qh (Blue)
    Amain bit.ly/3AesLy6 (Red)
    Amain bit.ly/3iALNJb (Black)
    Amazon amzn.to/3DbYFgD (Clear)
    Ebay ebay.us/QPIesZ (Grey)
    Ebay ebay.us/9LpgL7 (Black)
    Ebay ebay.us/cEzn94 (Orange)
    Ebay ebay.us/XUCq6e (Red)
    Ebay ebay.us/i2RvPV (Blue)
    Axial SMT Transmission on Ebay
    ebay.us/PVTvgt
    Links for Thor:
    Axial Ryft RTR
    Amain bit.ly/3iKnkkV (Black)
    Amain bit.ly/3skmAWK (Orange)
    Amazon amzn.to/3EAsdGn (Black)
    Amazon amzn.to/3hHO5FT (Orange)
    Ebay ebay.us/ygiuEK (Black)
    Ebay ebay.us/n8RvdP (Orange)
    Spare Times Hobbies Chassis
    sth.ecwid.com/V1W-M2-Victor-1...
    Spare Time Hobbies Optimus Bundle
    sth.ecwid.com/V1W-M2-Optimus-...
    Holmes Crawlmaster Mini ESC
    holmeshobbies.com/electronics...
    Holmes Hobbies Revolver Motors
    Holmes holmeshobbies.com/motors/brus...
    Amain bit.ly/3Bes2xT
    Holmes SHV 800 Servo
    holmeshobbies.com/electronics...
    Ebay ebay.us/37CBfC
    Jconcepts Tucked F250
    Amain bit.ly/3uZJJ0w
    Ebay ebay.us/4UucSO
    All the Vitavon parts on ebay for the Ryft
    Front and Rear Axle housing ebay.us/Klifrw
    Front Axle housing ebay.us/ge78hk
    Rear Axle housing ebay.us/qnSPmF
    Input Shaft ebay.us/xCMOKN
    Trans Case ebay.us/SSGI88
    Knuckles ebay.us/dUkiPG
    Links ebay.us/UEuOtU
    Rear Arms ebay.us/m1SU4x
    2.2 Beadlock Wheels ebay.us/Os2sHc
    Diff Cup ebay.us/zpbEZf
    Steering Link with Saver ebay.us/Tx1yP4
    Front Swaybar ebay.us/vxqkVz
    Rear Swaybar ebay.us/ZOuDZM
    Reefs RC 99 Micro www.reefsrc.com/shop/p_651716...
    Amain bit.ly/37mzBpj
    Ebay ebay.us/RSvzMo
    Proline 2.2 Foams
    Amain bit.ly/2WqWu9g
    Crawler innovation foams Deuces Wild
    crawlerinnovations.com/deuces...
    Kyosho 5x7 shim set
    Ebay ebay.us/b0YMJO
    CHANNEL MEMBER INFO
    If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc
  • Розваги

КОМЕНТАРІ • 181

  • @brianellison3525
    @brianellison3525 2 роки тому +11

    I bought one of the inexpensive transmissions from Amazon and was amazed at how close it was to my Vanquish. I liked how you showed the SAE vs metric deal. I hadn't measured that. It's cool that someone tried to put out a decent one, with the shims and all. Mine was noisy till I ran it for a bit, now it's smooth as ice.

  • @brentrobinson3274
    @brentrobinson3274 2 роки тому +11

    I've got 3 of these in rig I ran for 6 months and no issues so far

  • @robertlulloff1066
    @robertlulloff1066 2 роки тому

    I added this to my cart, then came on to search install and reviews and your video came up first. I'll take that as a sign lol.

  • @rennestrubberg9737
    @rennestrubberg9737 2 роки тому +2

    Great video as always. 💯

  • @dylanproctor329
    @dylanproctor329 Рік тому +6

    Id have to say the machining of the aluminum even looks better from amazon than vanquish

  • @713Ace529
    @713Ace529 2 роки тому +1

    Nice presentation bud. I may just pick one for a project. Thanks 👍🇨🇱

  • @ernieolsen7343
    @ernieolsen7343 2 роки тому

    I have two of them with no complaints

  • @krashkingrc9715
    @krashkingrc9715 2 роки тому

    Awesome video excellent comparison looking good

  • @MORCSPEEDSHOP
    @MORCSPEEDSHOP 2 роки тому +3

    I've been waiting for you to do this trans I only have this one and was curious how it compared

  • @benfred8
    @benfred8 2 роки тому +1

    This looks like it would line up with the StealthX transmission but needing longer screws and some good spacers. What do you think?

  • @shuster1921
    @shuster1921 Рік тому

    Great Find Brother!

  • @bogravel8551
    @bogravel8551 11 днів тому

    Hello! Enjoy your funny yet informative videos, especially this comparison on 3 speeds transmissions. I am curious if you've done a follow up video on reliability of the two in this video? Thanks again! See you in next video.

  • @toddbertram6556
    @toddbertram6556 2 роки тому +1

    The bolt in bearing seat is smart. I hate to purchase stolen patents but it may need to happen.

  • @samloveelvis
    @samloveelvis 2 роки тому +1

    Big fan of the channel! Would a 550 motor Fi this trans? Will it be too long?

  • @jetbuilder
    @jetbuilder 2 роки тому

    Guess I'll have to get one of these for my Capra.

  • @jstsumguy29
    @jstsumguy29 2 роки тому +1

    Love your vids bro. You got some killer toys.

  • @fatfreddiescat9952
    @fatfreddiescat9952 2 роки тому +1

    Funny I just ordered of of these cheapo boxes to see what there like. I’ve also ordered a vp one to. My guess would be the vp one will be better on tolerances and machine work.

  • @just-in-time6069
    @just-in-time6069 2 роки тому +1

    Just matter if time before they copyed their dig Iam shore it will wear out do to softer metals but i think I am gonna try it aleast .in one hand hate copy's in another aleast you can try to see if it is for you without dishing out money up front .keep up great work and have great day.

  • @andrewrichey7374
    @andrewrichey7374 2 роки тому

    Wow that’s super cool

  • @jimlayhey1965
    @jimlayhey1965 Рік тому +1

    what spur and pinion would you recommend with stock capra axels with this 3 gear

  • @Loomis_Fishin
    @Loomis_Fishin 2 роки тому

    I was looking at this but I can’t find the specs on the gears just in case I had to replace anything. Will scx10 gears fit? If the dig messed up you could put the vanquish one on and be good.

  • @stabbyjosh7931
    @stabbyjosh7931 2 роки тому +5

    I have three of those transmissions. I have not had a single problem.

    • @ExocagedRC
      @ExocagedRC  2 роки тому

      That’s good news. Thanks!

    • @mujirc
      @mujirc 7 днів тому

      Hello sir could you please tell me which pinion teeth are you using with the stock crown teeth.

    • @stabbyjosh7931
      @stabbyjosh7931 7 днів тому

      I'm using the one that came with it. I think it's 48 pitch. I don't know the tooth count.

  • @INSIDIOUS-ONE
    @INSIDIOUS-ONE 2 роки тому

    Idk if I want dig? I think just 4 wheel steering would be fine. Do people run 4 WSing & dig?

  • @Tacklefinlures
    @Tacklefinlures 2 роки тому +4

    Wow, for the exception of a few holes it’s a carbon copy. Nicely done brother.💯

    • @ExocagedRC
      @ExocagedRC  2 роки тому +2

      Yeah maybe the alloys are different?

    • @brianellison3525
      @brianellison3525 2 роки тому

      Biggest diff I noticed was the tolerances in metric scale vs SAE. I know Vanquish likes to use SAE a lot, like the 4-40 screws instead of the 3 mills.
      Makes ya wonder if the manufacturer just thought it better to use one scale all throughout.

  • @urdonercjeremyburris7541
    @urdonercjeremyburris7541 2 роки тому +2

    For the slop of the arm, drill a hole in the silver shaft, tap it to a. Screw size, add a screw and washer. That will tighten the slop

    • @ExocagedRC
      @ExocagedRC  2 роки тому +1

      You are correct. I may do that but for now it’s in Thor as you see it here

    • @urdonercjeremyburris7541
      @urdonercjeremyburris7541 2 роки тому

      @@ExocagedRC ya I know. It was a suggestion I saw on Instagram that someone else did

  • @paullockard4178
    @paullockard4178 2 роки тому +2

    I have that trans in my gen7 and some how cracked all 4 mounts on the case and had to go aluminum

  • @vinnyilaria2064
    @vinnyilaria2064 Рік тому

    What's a good servo to use with this trans and a hobbywing fusion motory current one hits the motor case

  • @happys104092243
    @happys104092243 2 роки тому +1

    You didn't putt the shim back in on the rod on the Amazon trans

  • @rc-daily
    @rc-daily 2 роки тому +10

    My sons scx10 2 clone has that same trans without the dig and it's been great for a while now! I'd bet it'll work just as good as the vanquish. Plus it comes pre-assembled

    • @ExocagedRC
      @ExocagedRC  2 роки тому +4

      I did have to grease it but otherwise it’s in Thor now

    • @rc-daily
      @rc-daily 2 роки тому +3

      @@ExocagedRC yeah they send them all dry for whatever reason. But it doesn't take much to pop them open!

    • @TheNamesArif
      @TheNamesArif 2 роки тому +1

      @@rc-daily probably cuz it's cheaper and it really isn't much of a big deal

    • @mrcrazyg777
      @mrcrazyg777 2 роки тому +1

      @@TheNamesArif I could be wrong but I'm guessing it's something to do with shipping because grease could be considered hazardous but Idk

  • @eye7creations
    @eye7creations Рік тому +2

    was there a follow up to this vid?

  • @wellcrc-6703
    @wellcrc-6703 2 роки тому +2

    What alot of people dont realize about the production world is you can only hold the patent for a certain item for a year until it has to be renewed. Most companies dont renew. So any overseas company can then by the blueprints and manufacturer the same piece for a fraction of the cost. LOGISTICS AT WORK

    • @ExocagedRC
      @ExocagedRC  2 роки тому +1

      That’s interesting. I knew it expired but thought it was a longer duration on them.

    • @bobzilla9p0
      @bobzilla9p0 2 роки тому +1

      @@ExocagedRC IT is longer in the USA. 20 years. renewals might be short after the initial 20 years, but by that time a lot of products are obsolete. And yes I deal with filing for patents in my career.

  • @focusdrivenmedia3436
    @focusdrivenmedia3436 4 місяці тому

    Is there less slop when the its in 4wd on the hurtz?

  • @logansellers6278
    @logansellers6278 2 роки тому

    @exocaged rc will this fit in a redcat gen 7 pro with a stock motor

  • @Webb4RC
    @Webb4RC 2 місяці тому

    I just ordered this for my scx 10. I have a Jeep rubicon body coming I hope I don’t have to trim a lot off the body. Also what size servo horn will I need, or will a regular sized horn work ok? If I need a servo horn would you link one? Great video man, I always research before I buy anything and this tranny seems legit, thank you for this video!!👍🏻

  • @tiny_truck_addict
    @tiny_truck_addict 2 роки тому +5

    It’s funny how people in the Amazon reviews swear that this isn’t a copy of the Vanquish tranny when this video shows that it’s almost an exact copy.

    • @ExocagedRC
      @ExocagedRC  2 роки тому

      Yeah it’s very VERY close.

  • @andrewbrown8927
    @andrewbrown8927 2 роки тому +10

    It's because vanquish hired a company to make that part and the company also sells it. You pay double to have the vanquish name.

    • @TheNamesArif
      @TheNamesArif 2 роки тому

      Is that true? the double is because vanquish is the one to design and develop it. when you just copy it's twice as easier

    • @andrewbrown8927
      @andrewbrown8927 2 роки тому +2

      @@TheNamesArif yes it happens with a lot of parts. They design it and then send it to a company that can manufacture the part.

    • @scalecrawlerfabshop4457
      @scalecrawlerfabshop4457 2 роки тому +4

      @@andrewbrown8927 You have no idea what you are talking about. Vanquish is a full machine shop with dozens of CNC’s right in Sacramento, CA….

    • @andrewbrown8927
      @andrewbrown8927 2 роки тому +5

      @@scalecrawlerfabshop4457 there is always some person like you in the comment section that believes they know everything when in reality you don't have a clue what your talking about. They outsource work everyday whether you like it or not.

  • @dustyhumphries8924
    @dustyhumphries8924 Рік тому +1

    How is it holding up!! So far

  • @Grimacedriver
    @Grimacedriver 2 роки тому

    Would this work for the ecto?

  • @jockpenny01
    @jockpenny01 2 роки тому +1

    Hi there great channel. One quick question will that transmission work in a SCX 10 II with the standard gray transmission. If I fit it will I need to change anything else like the rear prop shaft? And will the standard spur gear fit in that transmission?

    • @ExocagedRC
      @ExocagedRC  2 роки тому +2

      It should bolt in. You may have to make adjustments to the shafts and clearances for the dig unit and all.

    • @jockpenny01
      @jockpenny01 2 роки тому

      @@ExocagedRC buy adjustments do you mean I will have to replace the safts or what.?

  • @tonymichelle9356
    @tonymichelle9356 2 роки тому

    The inside the gearbox is that metal or plastic?

  • @brucebartlett1950
    @brucebartlett1950 2 роки тому

    Only thing is you can't run a 550 mtr unless you move the servo mount back.

  • @Isuzu_Paul
    @Isuzu_Paul Рік тому

    Looks like an axial deadbolt gearbox, but with an added dig.

  • @Honoluluairsoft
    @Honoluluairsoft Рік тому

    Hey exocaged I know this is a older video but I was wondering if this would be something that is possible to be installed in a basecamp

    • @Honoluluairsoft
      @Honoluluairsoft Рік тому

      Or if not do you know of any other alternatives

  • @brookerobinson85
    @brookerobinson85 2 роки тому +1

    To use the three stage dig on this transmission would the GT5 transmitter be a good option ? or can U do a vid on how you would set it up in the new rig 🙏😁 cheers & hi from NZ 👍

    • @ExocagedRC
      @ExocagedRC  2 роки тому

      Hey man yeah the GT5 would be good on the toggle switch. Ch4 I think it is.

    • @mojaverc1585
      @mojaverc1585 2 роки тому

      I used a stock remote out of an element for 3 position and it works just fine too

  • @dpyz4503
    @dpyz4503 Рік тому

    Would this fit in a scx10 3?

  • @Steve_J81
    @Steve_J81 2 роки тому +2

    I had purchased that transmission for my scx10 iii but sadly it wont work because the dig unit hits the link mount.

    • @scottloersch555
      @scottloersch555 2 роки тому

      Make a custom skid plate with a old cutting board

  • @ashleyconnelley556
    @ashleyconnelley556 2 роки тому +3

    That’s my guess

  • @Jfitzroy1
    @Jfitzroy1 2 роки тому

    Interesting video. I want to build a Thor.

    • @brianellison3525
      @brianellison3525 2 роки тому +1

      Build a Jake, Thor's been done,
      All good man, it's just cool you want to build.
      Low CG is king.

  • @michaelbrand3297
    @michaelbrand3297 2 роки тому

    Anyone know if one of these or one like it will wrk in axail ryft

  • @NCMOUNTAINSbackyardRC
    @NCMOUNTAINSbackyardRC 2 роки тому +1

    Looking forward too much Enjoyed this . So that three geared transmission. Will drop in just about anything. Axial or enduro ? Man my UMG10 ll would look really good with dig. And duel winches. Front and rear. Servo winch to the rear.
    I’d make it cool recovery Rig
    And four wheel steer imagine that
    👌👍

    • @ExocagedRC
      @ExocagedRC  2 роки тому

      Pretty much yeah. Same bolt pattern

    • @patrickholton9765
      @patrickholton9765 Рік тому

      ​@@ExocagedRCwill it drop into a redcat gen8?

  • @speckledjim_
    @speckledjim_ 2 роки тому

    Made in the same factory?

  • @La_motavation
    @La_motavation 2 роки тому +2

    I’m sold!
    I’m trying this out on my new rig

    • @PhilBender612
      @PhilBender612 2 роки тому

      Its only about 20 bucks difference for the real Vanquish, plus your getting better quality aluminum that wont wear out and I doubt there's a warranty on the china brand. Just some thing to consider...

    • @La_motavation
      @La_motavation 2 роки тому +1

      @@PhilBender612 but that’s just the dig unit
      This comes with the trans too so it’s a steal!!

  • @rchollercrawlin1042
    @rchollercrawlin1042 11 місяців тому

    So could I replace the Amazon dig unit with the vanquish one? Or does the shaft size keep it from being a direct swap. I have the Amazon dig transmission, but I wouldn’t mind to upgrade to the vanquish unit.

    • @ExocagedRC
      @ExocagedRC  11 місяців тому

      I think it’s a direct swap

  • @chadzigler
    @chadzigler Рік тому +1

    be cool if it was a 2 speed with dig, selectable 2wd/4wd, even traxxas needs a set up like this. 2 speed with dig, selectable 2wd/4wd without modifications to the chassis, transmission swap, modifications to the drive shafts. but seen videos where they did that on trx4, but no servo. manually switch. that be a pain
    cause rock crawlers ain't always in 4wd
    neither regular rc non rock crawlin 4wd trucks

  • @tomlucasrccrawlers9108
    @tomlucasrccrawlers9108 2 роки тому +3

    You just helped that knock-off some serious sales. Hahaha
    Good video as always Buddy.

    • @ExocagedRC
      @ExocagedRC  2 роки тому +1

      Yeah probably, I got all the Vanquish links in the description as well. I found another SMT trans on eBay so I got that ordered so that Vanquish will get used somewhere.

    • @tomlucasrccrawlers9108
      @tomlucasrccrawlers9108 2 роки тому

      @@ExocagedRC Cool.
      I've thought about the Vanquish trans/dig for my BC8 Mammoth(yes. Right?!). Figure it'd be way stronger than stock. Just not sure it's be geared low enough.
      Seen some 8x8 Truck Trial rigs with front/rear and side-to-side dig.

  • @toddbertram6556
    @toddbertram6556 2 роки тому

    Is it machined or cast, couldn't hear well when I was watching. I assume gear and bearing quality are your variables. You can drop 80 on bearings without blinking. Another patent lost to over seas.

  • @old-rcplane-phart
    @old-rcplane-phart 2 роки тому +2

    😁👍 today

  • @houstonrccrawlers6445
    @houstonrccrawlers6445 2 роки тому +1

    Not bad for 60 bucks man

  • @BK33REVIEWS
    @BK33REVIEWS Рік тому

    I am building a lcg cheater rig and am running ar 44s axles can anyone please recommend a transmission besides the stealth x where I can get overdrive in the front please help

  • @mansini1000hk
    @mansini1000hk 2 роки тому +1

    do you think you can put it in a Redcat gen8 v2? 😃

  • @Redeemedled
    @Redeemedled Рік тому +1

    So dummy question and I own that if I have a 32p pinion I will need to change that to the 48p pinion correct. I’m new to all this so just trying to get a better understanding

  • @Zebadiah36
    @Zebadiah36 2 роки тому +5

    You know, I’m honestly torn on all imported the “chanquish” parts. Because part of me says IP theft IS THEFT, but also I’m a total cheapskate. Like if they have to reverse engineer it anyway and put the parts into production why not put a little tiny bit more effort in and make a similar product that’s their own design?

    • @ryano8613
      @ryano8613 2 роки тому +1

      Don't forget... In some cases they steal from we the consumer because a lot of these expensive parts we buy are the same. They pay pennies and brand it and sell it at 200% margin or MORE. most times when you buy (not always) name brand hi price, you are being ripped off. Soooooo. Who is the thief? They are all marketing scammers and don't care. We should just buy cheapest possible.

    • @jnmwtkns
      @jnmwtkns 2 роки тому +1

      As long as it is different in anyway. Its not considered IP .
      I am personally glad there are lower cost options I have been priced out of completing projects due to a very limited budget. When it comes to the essentials always buy name brand for costumer support alone.
      I have been running knock offs for just about everything else and if I didnt tell no ones notices anyway.

  • @hotheadedfilmshhf6734
    @hotheadedfilmshhf6734 Рік тому

    Would there be any way to fit this into a trx4 bronco?

    • @chadzigler
      @chadzigler Рік тому +1

      my trx4 bronco chassis had to be modified for the scx10 transmission plate to work. plus, scx10 chassis gear box, need 1/4 inch spacers for both sides. plus scx10 be single speed there unless you get 2 speed scx10, but be a pain for the dig. servos unless you get a micro servo and mount. might or might not work since 2 speed with dig needs a longer chassis and drive shaft work, angled downward to the front or rear. mine is turned around, angled and pointed downward towards the front so it be smooth for free roll in 2wd, rear pull, 4wd all pull, dig, rear pull, front locked for doughnuts and burnouts

  • @anthonycourtney6713
    @anthonycourtney6713 Рік тому +2

    Anyone have a fix for the spur gear wobble on this transmission ?

    • @ExocagedRC
      @ExocagedRC  Рік тому

      How much wobble? I have two of them and they seem to be ok for me

  • @cesarurrutia6128
    @cesarurrutia6128 2 роки тому

    Anyone know what overdrive gears (size) works with this gearbox? I just ordered one and I want to add overdrive in the front thank you

    • @ExocagedRC
      @ExocagedRC  2 роки тому

      No od available for this trans. Gotta be in the axles.

    • @cesarurrutia6128
      @cesarurrutia6128 2 роки тому

      Exocaged RC ok thanks, keep up the top work🍻👍🇦🇺

  • @bevinsracing
    @bevinsracing Рік тому +1

    Will this fit or bolt into a axial wraith?

    • @ExocagedRC
      @ExocagedRC  Рік тому

      It’s got the old 3-gear bolt pattern

  • @anmwolfrc159
    @anmwolfrc159 10 місяців тому

    My friend what size of pinion gear I should use

  • @redvikinghobbies
    @redvikinghobbies 2 роки тому +1

    Got the link?

  • @meanf1502
    @meanf1502 2 роки тому +1

    What gold hex driver is that nice content

  • @chondro209
    @chondro209 Рік тому

    Will this fit a scx 10 iii?

    • @ExocagedRC
      @ExocagedRC  Рік тому

      if you use the Bowhouse 3-gear adapter it will

  • @wolfpackrc
    @wolfpackrc 2 роки тому +1

    It could be they are the same.

  • @machinedred
    @machinedred Рік тому +1

    How long did it last ?

  • @jonthomas8487
    @jonthomas8487 2 роки тому +2

    I know some things from Vanquish are made in USA. Is that the case with their hertz dig unit? That would justify the extra for me. Heck, plastic 3 gears can be found used for $10

    • @ExocagedRC
      @ExocagedRC  2 роки тому

      About $50 for a complete SMT 3-gear trans on eBay. I ordered that last night.

    • @alexcalley1928
      @alexcalley1928 2 роки тому +1

      All of VP's aluminum is machined in California at their shop.

    • @jonthomas8487
      @jonthomas8487 2 роки тому +1

      @@alexcalley1928 except Incision branded items though

  • @johnnymckissick2735
    @johnnymckissick2735 2 роки тому +1

    Where is the link?

  • @iconone5
    @iconone5 2 роки тому +1

    How long did shipping take?

    • @ExocagedRC
      @ExocagedRC  2 роки тому

      About 4 days.

    • @iconone5
      @iconone5 2 роки тому

      @@ExocagedRC was it on prime? The one shown is not in the USA.

    • @iconone5
      @iconone5 2 роки тому

      Update! It took about 12 days to receive the trans from non prime shipping from Australia.

  • @yiarkungfu
    @yiarkungfu 2 роки тому +1

    Will this go into a Capra?

    • @ExocagedRC
      @ExocagedRC  2 роки тому

      Not sure if there is room for the servo in that chassis

    • @stabbyjosh7931
      @stabbyjosh7931 2 роки тому +1

      Yes, I have done it. But you will have to shim it on one side, so the motor clears the rear link mount. You can buy a skid, or just fill the stock skid with JB and re-drill.

    • @Jimmy2Horses
      @Jimmy2Horses 2 роки тому

      With a Vader skid, yes.

  • @srxmod700
    @srxmod700 Рік тому

    How many teeth does the spur have ?

  • @jasond1245
    @jasond1245 2 роки тому +1

    I don't like buying knock offs but vanquish stuff is to costly I looked at 1 axle from them it was 300 dollars where I could get a front and rear for half the price.

  • @jakejager
    @jakejager 2 роки тому +1

    Pardon my ignorance, what is a "dig" in this case?

    • @ExocagedRC
      @ExocagedRC  2 роки тому +1

      It locked the rear driveshaft and let’s the front drive and pull the truck around. Usually for very tight turns

    • @jakejager
      @jakejager 2 роки тому

      @@ExocagedRC so it allows you to make it a front wheel drive vehicle on the fly?

  • @seth8005
    @seth8005 2 роки тому +1

    Wow...so much for only 60 dollars?!

  • @janierik
    @janierik 2 роки тому +1

    Look same superficially but the other has higher cost of manufacturing... the other more savings in costs

  • @jameshankssr466
    @jameshankssr466 2 роки тому +3

    Like i told my son a million times more expensive doesnt always mean better! You dont have to spend a ton of money for a name because thats all your paying for is the name

    • @WasNiksIsNiksWordtNiks
      @WasNiksIsNiksWordtNiks 2 роки тому

      @Steve Vento We all know that Vanquish makes them theirselves in Cali though.

  • @Lee.gRC27
    @Lee.gRC27 2 роки тому +4

    Way cheaper on aliexpress , iv run one for months

  • @mychalpstanton9188
    @mychalpstanton9188 2 роки тому +1

    I run amzon trinmission 6s metal is not soft lol 😆 1yr strong 6s crawler / ass hauler lol

  • @kitchenbriks3685
    @kitchenbriks3685 2 роки тому +1

    Amazon's great because you can order the cheap knockoff stuff and if it's absolutely garbage you can return it.

  • @jasonbickford4283
    @jasonbickford4283 2 роки тому

    I baught a 20 dollar Amazon 3 gear transmission and it lasted half of 1 battery...lol I knew better but had to see for myself

  • @ashleyconnelley556
    @ashleyconnelley556 2 роки тому +3

    But if your not hard on stuff that shouldn’t matter

    • @ExocagedRC
      @ExocagedRC  2 роки тому +2

      True. I always drive courteously and slow.

  • @ka4172
    @ka4172 2 роки тому

    Its like all the luxury fashion brands like (D&G) let do assembel there clothes in China,and sells them way overpriced in europe or the states.

  • @PhilBender612
    @PhilBender612 2 роки тому +6

    Its like a $20 difference I think. I rather support the American based co. for a better product always. And you are correct with softer metals. I have experienced that my self with china brand parts. They DO wear out quicker. I buy the real stuff.

    • @dsrjerfe
      @dsrjerfe 2 роки тому +15

      The vanquish dig unit is $88. The $60 unit in the video is the entire transmission and dig unit. So its more like a $190 difference if you bought a 3 gear vanquish trans and vanquish dig.

    • @Spagyr
      @Spagyr 2 роки тому +6

      Yeah 20 dollar difference is incorrect.

    • @bragilbe12
      @bragilbe12 2 роки тому +2

      If you want the whole trans, the vanquish is about $170 while the amazon is $61

  • @aaroncarey2909
    @aaroncarey2909 2 роки тому +1

    Im going to take a wild guess here and say they're both made in China.

    • @bobzilla9p0
      @bobzilla9p0 2 роки тому

      Vanquish has CNC operations in California. I believe all of there stuff is made in the USA. I don't mind the China sourced stuff, but I wish more people would realize when they straight up steal IP. They scanned the Vanquish unit, swapped hardware to metric, and started popping out copies.

  • @charlesdipanni3725
    @charlesdipanni3725 2 роки тому +2

    You should get your nails done

    • @ExocagedRC
      @ExocagedRC  2 роки тому +2

      I’m a mechanic, forklifts and all kinds of industrial machinery. It’s hard to keep my hands clean at all.

  • @scottoblander9419
    @scottoblander9419 2 роки тому

    I wouldn't support design copiers.

    • @keldonator
      @keldonator 4 місяці тому

      You use a microwave and cell phone, maybe a toilet, door, everything around you is someone else's idea before it was made into what it is now that you use.

  • @netten9432
    @netten9432 2 роки тому

    Imposter

  • @The_Privateer
    @The_Privateer 2 роки тому +5

    An exact carbon copy replica knock off - all depends on how well a person follows their morals of right and wrong.
    Personally... things like this are flat out theft.
    Taking the time, thought, and engineering effort of one person and simply copying it to make a quick buck.

    • @blindj
      @blindj 2 роки тому +3

      I agree, it is stealing the design. It's shitty and unfortunately unstoppable. That being said I'm sure corners are cut, like materials and tolerances but for a lot of people saving the money plays a huge role in the decision made on which one to purchase especially if the cheaper version works well. I myself buy cheaper beadlocks ( treal brand ). None of them are clones of vanquish products that i own And I have had zero issues using them.

    • @TheNamesArif
      @TheNamesArif 2 роки тому

      If you got no issues with money, go ahead and buy the original. It's not really on you as a customer and vanquish has every right to sue that company

    • @blindj
      @blindj 2 роки тому +1

      @@TheNamesArif They can sue all they want However nothing would ever come of it because China doesn't follow our copyright laws. I agree with you as a customer especially one with limited pockets we have to shop accordingly.

    • @HighhScore
      @HighhScore 2 роки тому +1

      If thats what it takes to make them realize their prices are outright ridiculous then by all means.

    • @blindj
      @blindj 2 роки тому +2

      @@HighhScore precision machining cost money and so does design work. I thought some 3D printed parts were ridiculous until I started designing some of my own parts. Designing at least for me in CAD is a skill that I thought would be much easier. I am good with computers however when I started playing around in CAD I realized why design work is so expensive it takes a lot of time. That being said I can't afford vanquish parts all the time. I don't like spending crazy money on beadlock wheels when I can get something that works just as well for 1/3 the price. If no one purchased the bank wish products they would rethink their pricing I assume but they have a die-hard fan group that are willing to pay whatever they ask I'm just not part of that fan group.

  • @moosejawrc
    @moosejawrc 2 роки тому

    so promoting stealing of intellectual Property...

  • @gabrielpichardo1492
    @gabrielpichardo1492 2 роки тому

    Will that fit an scx10?