RANGE ROVER L405 SERVICE

Поділитися
Вставка
  • Опубліковано 11 лис 2024

КОМЕНТАРІ • 21

  • @robholland1937
    @robholland1937 Рік тому +5

    Advanced Factors now sell hex head replacement air box screws. Way better than the cross heads

  • @davejblair
    @davejblair Місяць тому

    Another great video. Off topic, but can I ask where you got the front grill? Looks smart.

  • @АнтонАнтонов-н9д

    Hello!
    Can I give you a hint if you don't mind?
    The oil filter should have a height of 115mm. no more, no less, this is important and you should always check the rubber valve on the spring plate, otherwise it can have dire consequences, and based on the previous videos, your car already has enough excess engine oil in the intake tract. What was very unexpected was that you did not use a torque wrench when tightening the oil filter bulb; the tightening torque is specifically indicated on it.

  • @robholland1937
    @robholland1937 Рік тому +3

    Nice overview Ray 👍

  • @donmezdonmez7801
    @donmezdonmez7801 Рік тому +3

    Love your videos, keep it up

  • @ruslanrusu5159
    @ruslanrusu5159 2 місяці тому

    Good job and helpful! 👌🇺🇦

  • @knwatkins
    @knwatkins Рік тому +4

    Ideally it should be the C1 oil not the C2 as pictured.

    • @RaymiesGarage
      @RaymiesGarage  Рік тому +4

      Your rigt I put the wrong picture in the video lol www.smithandallan.com/product/smith-allan-momentum-c1-f-5w-30-engine-oil-4127

  • @КонстантинВасюков-к4г

    Клапан под фильтром проверь!) а то можно получить гидроудар на 8 цилиндре!
    И насос масляно вакуумный перебрать бы по технологии Дяди Федора из Санкт-Петербурга, чтобы турбина не отъехала и не сливать масло литрами из интеркуллера!)

  • @mvirdi2333
    @mvirdi2333 Рік тому +2

    Very nice
    👌👌👍❤️❤️🙏🙏

  • @RawwUnderGround
    @RawwUnderGround 4 місяці тому

    Very good video mate🤝

  • @stephenwhiting731
    @stephenwhiting731 11 місяців тому +2

    What make is the oil suction pump were can you purchase thanks Stephen

    • @RaymiesGarage
      @RaymiesGarage  11 місяців тому

      Summile Oil Extractor 5 Gallons / 22.7 L Oil Garage Extractor Drain Drains Tank Oil Changer Vacuum Fluid Extractor Pump Tank Remover(22.7L) from amazon

  • @grantconstantine3639
    @grantconstantine3639 10 місяців тому +1

    Hello. Can you tell me what OBD tool you use please? Thanks

    • @RaymiesGarage
      @RaymiesGarage  10 місяців тому +1

      www.gap-diagnostic.com/products/iidtool/

  • @YasirAliArain
    @YasirAliArain Рік тому +2

    Assalam walekum iam YASIR ALI ARAIN sir Rnage rover 2020 Evoque real tailghate not work but i cheak scanner foult code but not foult code remote press tailgate. Not opne and tailgate back button not open an close how we solve this foult sir.

    • @RaymiesGarage
      @RaymiesGarage  9 місяців тому

      Try this ua-cam.com/video/DaekLaErajk/v-deo.html

  • @BH-tp3pm
    @BH-tp3pm 10 місяців тому +1

    Just a query - I have what sounds like a knocking noise and I can feel something under the car when I pull away. Someone said to me it could be that the tranny fluid needs changing and others said that it is because I have 2 new front tyres and old rear ones (by old I mean have about 5k miles on them).
    Anyone got any ideas?

    • @RaymiesGarage
      @RaymiesGarage  9 місяців тому +1

      Sounds like suspension, change the diff fluids, and transmission fluid you will definitely feel a difference.😀

    • @BH-tp3pm
      @BH-tp3pm 9 місяців тому +1

      @@RaymiesGarage thanks for the reply mate.
      Interestingly enough, and I feel really silly admitting this, it was the tyres… 🙄 my rear driver side had really bad wear on one side (inside) and it was causing the drive to al go to the rear passenger side as the computer detected better traction.
      The uneven wear on one side was not mechanical / suspension related. It was because the tyre garage had put a 10.5 inch wide wheel on the back and torqued the lug nuts up soooo much that the whole wheel was being pulled in at a slight angle. I also had to get all 5 lug nuts drilled out as they were so over torqued on the wheel itself. 🤦‍♂️