Cub Cadet XT1-LT50 engine troubleshooting

Поділитися
Вставка
  • Опубліковано 16 лис 2024

КОМЕНТАРІ • 22

  • @lesolson2380
    @lesolson2380 4 роки тому +1

    Thank you much, enjoyed your video, just wish that you could have shown all of the steps in doing the work and not jumping to points after you got things done. Some very good information though!

  • @james2896
    @james2896 4 роки тому

    Yes thank you for the info! I’ve been struggling with the same issue for 2 days already!!!

  • @yeahright6268
    @yeahright6268 4 роки тому +2

    I got a cubcadet xt1 with the Kholer engine it only has 3 hours on it , brand new I bought it and today is doing the same thing , it stalls and shutting off 🤦‍♂️.

  • @roberthicks9191
    @roberthicks9191 Рік тому

    look at all those ants,lol great video

  • @812macdaddy
    @812macdaddy 4 роки тому

    That throttle cable can get out of adjustment too and cause problems similar to that

  • @ronniegibson8577
    @ronniegibson8577 4 роки тому

    Thank you for this video. My mower was doing the same thing.

  • @geraldborne94
    @geraldborne94 3 роки тому

    The solenoid and voltage regulator needs changing and maybe the stator if the battery is not charging

  • @geraldborne94
    @geraldborne94 3 роки тому

    Change the belt its stretched thats why it's not engaging. Change the fuel pump on side the engine.

  • @stoneyswolf
    @stoneyswolf Рік тому

    Where do these people get gas? I never had any issues with my carb I never use additives or stabilizer just supper unleaded every season it fires right up 7 years straight now.

  • @tls3067
    @tls3067 2 роки тому

    This may help me with my XT1 Cub Cadet that has same issue. Stalls on a load and almost dies frquently

    • @tls3067
      @tls3067 2 роки тому

      Guess it needs a carb rebuild?. Only 50 hours

  • @Tearfree709
    @Tearfree709 3 роки тому

    how did you get the jets out of the carbuerator? can you make a vidoe on that?

  • @dcearlock
    @dcearlock 4 роки тому

    What kind of cleaning solution do you use in the ultrasonic cleaner?

  • @lookingupwards8652
    @lookingupwards8652 4 роки тому +3

    Wow i wish I knew someone giving one away lol

  • @geraldborne94
    @geraldborne94 3 роки тому

    Nice job

  • @stonefox9124
    @stonefox9124 2 роки тому +1

    Dude... U NEVER show where that darkened most dirty part comes out of nor where it goes in assembly...

    • @stonefox9124
      @stonefox9124 2 роки тому +1

      The long thin brass piece with holes

  • @jaywalker712
    @jaywalker712 3 роки тому +1

    All XT1 Cubs throw the deck belt, if its efi it won't run long.

    • @duanemadison1821
      @duanemadison1821 3 роки тому

      It's not that they throw belts but that the belt tensioner is fastened poorly to the deck. If you have a nice lawn you'll never know of the weakness. All it takes is one hidden stump or rock to loosen the tensioner enough to cause it to throw belts until it gets fixed right. I've had my XT1 for about 4 years now and I should have been arrested for mower abuse the first 3 years. I have an older CC 2166 that I use for the rough stuff now. I love the XT1. I have about 3 acres that it mows twice a wee and does it in half the time that it used to take. It has not missed a beat in that time. Most everything gets bagged and then dumped and composted in with high fiber horse manure.

    • @mytruthslays1303
      @mytruthslays1303 2 роки тому

      I have a really rough terrain, never had a single issue with the belt.

  • @franksilvia3402
    @franksilvia3402 3 роки тому

    None of this happens if you use star tron or sta bil.