REPLACE PENTAIR POOL FILTER CARTRIDGE

Replacing your pentair pool filter cartridge with brand new cartridges.
Detailed video and step-by-step how to remove old filter cartridge, clean the filter container, and re-install the new filter cartridges.
Please help my channel by buying the Pleatco Pool Filter Cartridge using my link:
✅ ✅ 👉 amzn.to/3ncs6JP
Thanks for watching! please LIKE and SUBSCRIBE!
#pleatcopoolfilter #pentairpoolfilter #replacepoolfiltercartridge

[@DIYGEEKTEXAS]

Please help my channel by buying the Pleatco Pool Filter Cartridge I am using in this video using my link:
✅ ✅ 👉 amzn.to/3ncs6JP
Thanks

[@pusatory1]

Great info but you need to show what you’re doing. Your camera should tilt up.

[@katysilo4786]

Great instruction, you make this look easy!

[@subroot2352]

Best direction i watched so far! Thanks

[@vaughnmoody1010]

I really appreciate you sharing the fiberglass info. 😊👍🏽

[@drtinkersw]

Nice job. At the very end you said, make sure the pressure valve is closed before you prime the pump. I think you meant to say make sure it’s open until the water flows through the nozzle and then close it. Otherwise you build too much air pressure.

[@j3d3d1ah]

Just bought the same filter cartridge from you, I have a slightly newer 2020 generation of the pentair pool filter. Hopefully it works the same.

[@warrenlawhorne]

I am alergic to fiberglas, thank you very much for that tip. Mine is 20+ years old. Lots of sparkles! Subscribed.👍

[@gerardconnelly3308]

Helps if you center the camera on what you’re doing

[@BobbyFincher]

Just what I needed. Thanks

[@melissacarbone7457]

Wow! Thank you so much!! Exactly as you described.

[@smithcmau]

I was under the impression that you should prime with the relief valve open and close the valve once water started to come out of the top. Can someone tell me the reasoning for why it is or is not the case?

[@DIYGEEKTEXAS]

I have heard and seen this opening of relieve valve when priming the pump too. I have never done it and the pump always works for me. I think it is to make it easier for the pump to prime. When the relieve valve is open there will be less pressure to push through the filter. I am not sure though, I am not a professional on this. May be some other people should chime in. Thanks

[@alicepyne-jahneke8042]

I was always under the impression that you primed it just to get the air out of the lines faster. I've had my pool for 23 years and can count the number of times I've primed it in one hand, and I never have a problem w my filter

[@alicepyne-jahneke8042]

Thank you for the tutorial

[@Kingtut672]

Thanks for the video. A feedback for you is your next video, focus the video the parts you putting in place. In this video you kept of focus the camera on cartridge instead the parts you are mounting. Thanks again

[@glenn6684]

Always put gasket grease on seal.

[@carrtex]

Bro get a 7/8; wrench ratchet

[@NerdPerson23]

Can’t even see what ur doing

[@LRod62]

And it seems that the video does have some good instructions verbally but visually it was very hard to see what he was doing the camera was not focusing on the things that he was doing I think you guys need to redo the video

[@bludika]

Pleatco's are the BEST brand for these filters, Pentairs SUCK and they're overpriced AF

[@livelove2368]

The camera man is awful!

[@DIYGEEKTEXAS]

Sorry, I am a 1 man show.