How to Safely Clean a Pentair Clean & Clear® Plus Cartridge Filter
Вставка
- Опубліковано 9 лип 2024
- Pentair Clean & Clear® Plus Cartridge Filters have a large filter area for increased dirt capacity, and if the pressure gauge shows that the system is running at 10 PSI higher than its starting pressure, it is time for a cleaning. To ensure your pool cartridge filter is cleaner, you'll need to watch this safety video and gather a few tools before diving in.
Be sure to consult a pool professional before performing maintenance or attempting pool filter cleaning on your own, or call a servicer outright if you're unsure of how to clean a pool filter. Pentair cartridge filters, like many pool products, require that you closely follow the proper steps and procedures, and professionals know those best. However, if you do attempt service yourself, this video will walk you through the safest and best way to clean pool filters. For your safety, please watch the video in its entirety before attempting any maintenance on the Clean & Clear Plus Cartridge Filter. Failure to follow safety warnings and instructions can result in severe injury, death or property damage. Reference the installation and user's guide or call to receive a printed copy at 800-831-7133. Your safety is our priority.
For more information, visit www.pentair.com/poolfiltersafety.
For pool professionals, this video applies to the following SKUs:
160310 / CCP240
160340 / CCP320
160301 / CCP420
160332 / CCP520
00:00 Introduction
1:18 When to Clean Your Filter
1:51 Preparing to Clean Your Filter
2:43 Disassembling Your Filter
4:30 Cleaning Your Filter
5:12 Reassembling Your Filter
7:30 Restarting Your Pool System
8:24 Additional Safety Points When Restarting the System - Наука та технологія
Thank you. Please continue to add more educational videos so that safety and proper use of the equipment can be best achieved.
The new one-piece trunnion on the clamp (the part the bolt goes through) is superior to the old design. THANK YOU for addressing this issue.
Great instructions and good safety procedures. Very appreciated. Everything went as planned. Only thing I would add is use long-sleeve shirt. Fiberglass tank is itching my arms. Other than that, well done.
What issues can not having the air bleed screen create?
Thanks dude you’re the best
What position should the handvalve be when the pump is on
Last time when I attempted to clean the filters, the cartridges came out with the bottom manifold. After I washed the cartridges, I wasn't able to push back the bottom manifold where it was. The O ring prevented that. I tried to push harder, still no chance. What shod I do?
Hello,
For this issue you will need to contact your pool professional to ensure the bottom manifold gets seated properly and to check for any possible broken parts. For assistance finding a local pool professional near you, please reach out to us here:
www.pentair.com/en-us/education-support/contact-us/pool-spa-equipment-customer-service.html
You made it look to easy- everything seemed good except your shortcut on the drain valve. The drain valve on bottom has 2" x 3" rounded nut with a 5/8 nut in middle.Which one do you actually turn, and is it counter clockwise? Both are more than hand tight, so I am not sure. My guess is the bigger one, but I'll need a strap wrench.
Hi Mark,
The drain valve has standard threading and will loosen when turned counter-clockwise. You may need to use a set of channel lock plyers to loosen the drain plug. We recommend cleaning the O-ring on the drain plug to ensure there is no debris on the mating surface of the bottom of the filter or the threads the drain plug threads into. You may also want to apply a small amount of a water-based lubricant on the drain plug and hand tighten it.
For additional assistance, please contact our support team:
www.pentair.com/en-us/education-support/contact-us/pool-spa-equipment-customer-service.html