BCM Gunfighter Stocks
Вставка
- Опубліковано 25 січ 2025
- While visiting Bravo Company's new facility in Wisconsin, owner and CEO Paul Buffoni took Larry through a few of BCM's new accessories, including their line of BCM Gunfighter Stocks.
BCM Factory Tour with Paul Buffoni -
• BCM Factory Tour with ...
BCM Factoy Quality Control -
• BCM Factory - Quality ...
Click here to subscribe to UA-cam:
bit.ly/3qPWDw2
Subscribe to Full30.com here: www.full30.com...
Click here to keep up with me:
Facebook: / larryvickers
Instagram: / vickers_tactical
Website: www.vickerstact...
Book: www.vickersgui...
Gotta say , your fitness accomplishments are absolutely inspiring. If you can accomplish this with a busted up body that the military used up, then I can get off my couch and run a little. Thank you for showing me up! Great work !
they're solid for sure
The best
For years I ran a BCM with another SOPMOD, fairly tight, fairly strong... I happened to get a Gunfighter and tried it on the BCM... I had no idea that latch system so was smooth and tight. It made my old stock feel like it was rattling and bouncing around and flexing like a piece of junk. The lightweight, rigid tightness, wedge, rubber and QD points... Never going back. As far as the stocks I have, the Gunfighter is by far the best.
Dude bcm you guys nailed it. Magpul has everything to give kudos for you for their new stocks and other stocks going forward. Thank you.
Good stuff as always LAV! Thank you sir! ✌
Looking at my first BCM stock, trying to figure out what the differences are, and this is exactly the vid I needed to decide, thanks!
FINALLY!!! I have been waiting for the compartment stock to come out since TTI showcased them months ago!
BCM sends one hell of a promotional package. 💪💪💪
For me who IS searching for a stock to put on a DD M4A1, this video what perfect ! Thanks a lot 👌
Home run, thanks fellas, God Bless.
Love BCM products They are top Notch !!!!!!!!!!
Love the content and amazing camera work. Best gun channel imho.
Absolutely love BCM . I remember rocking them 7 years ago and no one knew who they were at the range . Now it's rare to see someone not having a BCM Part .
IMO the Top 3 Best Manufacturers at this current moment are
1. BCM ..
2. LMT..
3. LWRCI. .
I hope one day BCM releases a 100% complete Ambi forged lower to give LWRCI , KAC , and LMT a run for their money.
THANK you BCM for being a bad ass company for people who are in harms way
I’ll make sure I pass the word to Paul at BCM !!!
Damn, Larry has lost some serious weight!!! Great job!!
The only one I don't have is the sopmod 0, by far the best stocks I've tried, they feel like a one piece stock in just about every position & the cheek weld on the sopmod 1 is great with red dots & lvpo's. They made these right.
cant wait for that new upper receiver to come out
Best stocks on the market
I like the mod 1. Hopefully they come out with it in some form of gray.
ever heard of spray paint?
Name a more iconic duo, I'll wait
Ever since the first video of this BCM series came out, I emailed BCM about the Mod 0 SOPMOD stock that LAV was running on his BCM carbine with all those wolf gray parts on it, and BCM replied saying that they will not be making any of those Mod 0 SOPMOD stocks in wolf gray. I guess Larry has the only one.
Nothing stopping you from spray painting your own.
@@aresonance No, but I'd like my furniture pieces to match in color. Plus, I'm not in a hurry to change the stock on my gun right now, just that more options would be nice for if/when I want to change the stock on my gun.
That grey is so slick👌🏾
Holy shit Larry has lost a lot of weight. He looks really good
Just got the Mod 1 and it's da Bomb.
I have a second Mod 0 SOPMOD coming in the mail tomorrow, great design!
The QD sockets on these stocks only allow for one orientation thus binding whenever I shouldered the gun, that's why I switched it out for the Magpul SL stock, other than that these ate very well made but please fix this issue.
That's my only issue with these as well. I just don't like their limited rotation in the QD socket. Running a Magpul SL as well.
Great 👍 video as always
And great products USA 🇺🇸
I ❤BCM.
Well fudge. Just bought one with a qd hole but it’s limited travel is already getting to me.
Great video
Larry or Paul, has there been any issues with the QD socket breaking being its 100% plastic? Thanks
Excellence ON and around that table. BCM is one of America’s FINEST models of free-market capitolism...
Any ETA on that new/prototype upper receiver? The one in your intro. Just curious. Awesome video as always, LAV.
Great vid!
NEED RANGER GREEN, IT'S SO HOT RIGHT NOW
LOVE RANGER GREEN!!
I have 3 of these. Love the stock. Hate the fit and poor tolerances. Two of them are wobbly and one is so tight I can barely slide it on the extension. They fit the worst on my bcm extension, strangely enough. But a few strips of painters tape inside of the loose stocks tightens everything up, and I love them otherwise.
Hey BCM!!! can we please get the mk2 upper now! And a lower that is like the Aero m4e1 also!
I own 3 Aero m4e1's and an m5 and love them. Best lowers you can get at a decent price. I love BCM but would be worried about the price of a new lower and justifying it over the m4e1.
Am I able to use the first two for saint victor ar 10?
You guys should review Gear4Grunts RAMP-E magazine pods, designed by a veteran
I like the new baby ugg boots
But will they make a Lilac or Pink one?
Lol the video they show at 1:32 is the latch breaking, no?
It didn't break. Because afterwards, he picked it up and checked the function. It still can be adjusted and locks into place. Go watch the actual video
Please make a video about the beryl 5.56 in full auto.
Whew-eeee. I'm diggin' that grey. MSRP not bad at all
Bcm = greatest nuff said, big bcm fanboy!
Great stock
great video
Is a standard M16 or M4 issued to servicemen any less reliable or accurate without this stock. Is the DoD fielding an inferior weapon to our servicemen?
Nice watches!!
Wheres that enhance receiver, Paul? ;)
When’s those uppers coming out?
Would love to see some coyote or green furniture.
Great gear good to see thank you for the video. :):
BCM for the best in AR world!
Russian "AS VAL" check information. Very nice gan
I want the gray stock
1:40 Steve Wilkos works at BCM now?
My recce is on the way !!!
Me too!
Make a longer stock like vltor emod with elongated cheek weld
Need more foliage green!!
Nice stock
Nice
The BCM Uggs
Next vid probably bcm grip huh
The first one looks like the one I'd like to buy and try. The mod 0.
I wish there are buttstocks that can be side folded and also extended at the same time. Call me crazy if you want to people, is there any possibility to build a folding stock that can be folded both ways?
@@jessegaluk - it's an idea. We are having guns with ambidextrous controls. I'm thinking is it possible to make a buttstock that can be folded either side so that right/ left handed people use it with ease
Wish the colors were better like a real coyote brown
John Deez I tried that stock not for me but I like their colors better
Someone got inspired by the scar stock
That Deepsea gets beaten up properly.
WOLF GREY!!!
Of course I just bought the SOPMOD version for my SPR build...
Magpul Sl-S better than a B5 sopmod and better than the BCM I like BCM stocks but they would be my 2nd choice!🤯🔫✊🏿
Dude thats cheap for that quality. Most civi models running over $100. Thats amazing.
That stock is confirmed thicc.
Gray
Is that a Rolex Submariner?
No, it’s a a Rolex Deep Sea, James Cameron Sea Dweller
Looks cool and im sure it functions better then oem stuff. I just will keep my oem ak47 wood stock as is and improve my shooting skills
B5 Sopmod enhanced for me :) the gunfighter is cool though.
Larry needs to figure out his damn length of pull and stick with it.
I liked it better when Larry was pimping Daniel Defense. Nothing against BCM but those stocks look a bit thick for my taste.
Ten likes and 24 views, ???
Survives a fall, but what about a gun butt to the face?
Magpul guys magpul ...
Is it just me or is Larry Vickers losing weight?
Coyote!!!
Stay firsty my friends
Kool - I like big butts and I cannot lie
Real men call it a beard weld..... not cheek
В чем правда брат ? В деньгах !
*Insert repetitive ass kissing and virtue signaling comment, about Larrys weight.*
First!
First