I could not thank you enough. I was watching youtube and my screen turned black and no matter what i did nothing was working. So i restarted my pc and i got the red light. Did your steps and now everything works fine. Thank you again
I just got a blackout from my area due to typhoon and it shut down my pc automatically, when i got back to my pc and decided to open it, i had this issue, you just saved my life man cheers to you! it feels great to fix a problem like this where i know im not the most knowledgeable, you deserve a sub!
*IMPORTANT* I plugged the dpi cable into the graphics card rather than the default port and it worked just fine. Make sure its plugged into the right port before doing all of this. It saved me a lot of work. I didn't have to unplug anything except for the dpi cable.
I had this exact same problem. I did all what was stated in the video. It started happening after a period of time. I searched the net and got my answer. My PSU had become borderline due to updating my Ram and adding some more cooling fans. I simply ran out of power to run the GPU effectively. I upgraded the PSU from 650w to 750w and hey presto all works fine. Just thought I would share this as it took me forever to get rid of this VGA debug led.
I got exactly the same problem. With two identical mothers!!!! MSI B350 PCI mate and MSI B350 tomahawk. Both death exactly the same way. I suspect, maybe could be because both were updated with the last BIOS update from MSI? I really don't know the problem origin, I'm really desperate and frustrated...
I was playing a video game and never had any issues and all the sudden my pc I think reset its self but the screen went black and the keyboard and mouse lost power for 30 seconds the display never worked again I tried switching monitors I tried cmos reset I tried one stick of ram I unplugged no replugged everything all parts turn on and work perfectly fine like they did before it’s just that I get absolutely no display and now the usb ports are funky. Please help I’ve tried so many things I can’t figure it out and don’t have money to replace it I just got a new gpu for it as well I also tried switching to different display settings and used DP instead of hdmi nothing works
If you cabinet rgb is still on when powering up then it could be the problem with graphics card or cpu and if the rgb of your cabinet is on when booting up your pc then definitely it is the power supply i guess the power supply is dead check the power is working of not by inserting pin touching black wire and green you can watch video if you dont know how to check the smps is dead or not and also read the led debug check on which white light sits on is it on ram, cpu, vga if its sit on vga then it is the problem with graphics card
i got new parts and built my PC and it didnt show on the screen. ive tried the basic stuff but havent removed battery or used screwdriver, i think on my motherboard it has 2 switches, one reset and other flash. ive tried them and it didnt do anything i can see. i gave my pc to a guy who may get it working but he said its either CPU or motherboard and he thinks its the motherboard because the orange VGA LED light is showing on my Gigabyte AERO G Z790 motherboard and the CPU i have is i7 14700kf and i cant update bios without it showing on my monitor. do u suspect my motherboard to be faulty? im sure the CPU is fine. and my GPU works in old system so thats fine. i spent hell of a lot and got parts from germany and waited so damn long i feel im gonna struggle to send it back and get refund or whatever. seriously its been a nightmare of over 2 months getting parts from places.
Accidentally Bent CPU Socket Pins On Motherboard can cause no signal so check if there is any bent in motherboard or cpu and this usually happened when we not properly intall the processor on motherboard so check if there is any bent
PSA for those who did the simple diagnostics and didn’t work. Try either cleaning the PCiE slot. If your CPU has a IGPU, run the IGPU (remove the dedicated GPU and just run with CPU) and see if it posts. If it does not and the CPU is a known good CPU, sadly your board is a bust.
It’s really weird what happened in my case. I was using my old motherboard because I couldn’t use my current one because the cpu was busted, when the new cpu arrived I installed everything from the old board to the new one and it posted except for the gpu (even though it was working on the old one) then I switched back to the old one and used 2 different gpu’s and both didn’t work. So it’s not likely to be the motherboard, it could be the psu or rams or ssd or basically anything. I’m so frustrated
@@Nb_2089 I'm in the same situation. New motherboard, new PSU, tested different ram, different PSU, different GPU, and still can't find the source of the problem.
@@danobra For me the issue was the pcie slot itself, it just stopped working. I installed the gpu to the lower x4 slot and it worked so I ordered a new mobo and tested on it and everything worked
Bro I have the same problem but the slot worked for an old 710 I tried, my gpu isnt detected at all in task manager and its not the ram or the cpu. This is really frustrating. Any solutions would be welcome.
Hi, I bought this card from Amazon. I installed this card in my PC. All the fans work but I have a black screen with no signal. Do you think the motherboard is broken?
I once tried to install Linux pop os if I'm not mistaken and everything was working fine but after I tried to install Nvidia drivers with some command coz that's what you do on Linux everything is a command and that was the biggest mistake of my life my pc been on life support since , everything is switching on axcept for the display I've tried everything on UA-cam
Ive tried reseting bioa through cmos and jbat1 and it didnt wprk unfortunately. I get display when the gpu is in any slot but the x16, and the x16 works sometimes but stops working if i restart. Whats going on?
I had this problem too with intel i7 11th gen paired with a rtx 3060ti ,showed red vga light. At first dismounted my gpu and putting back in place at every startup would solve my problem but kind of painfull to do each time. But as soon as I removed the second ram there is no more vga light and it starts up normally
@@shLowKeyI really don’t know. I’ve put back the ram in place and now the only way to start my computer is to unplug the hdmi cable start the computer and wait until my keyboard and mouse light up then replug the hdmi and it works.
@@CustomRcCanada I figured out my issue. The VGA debug light would come on the motherboard. No POST or BIOS... After 2 mins, the BIOS would come up. I checked the storage drives and my SSD with Windows installation was not detected. So I removed the SSD and now there is no VGA light and I'm using another SSD with Windows and PC is working fine.
Mines odd, i have an issue whete sometimes it shows on boot up but sometimes it doesn't and later on my pc will lose display n wud crash (idle and during gaming)
im thinking the same thing, my guess was the power connector for the gpu is fked n my psu is non-modular :') i have it working for now so cba to buy a new psu n replace it tho when i do im getting modular for sure @@viperonpcisgoat
I found out that this white light is not only vga, a friend of mine got this issue and the issue got solved after removing all sata drives from the connections. A ssd was defect which caused the issue.
Having similar issues on my b760-i i 9 mine is only 5 months old every thing was great no problems until now the only thing different is i disconnect all cords and moved my pc to a different location for a few days im in fla Now nada stuck on yellow/green light
this happened to me and I was experiencing this for a month. I did all the things from this and other tutorials but still did not fix it. I finally went to a repair shop and they removed something from the back and its fixed. I asked what he removed and he said it was a cable going to my HDD. I was like, I dont have a HDD. he showed it to me and I remembered I actually have an HDD before and maybe because the HDD broke for a long while back and did not show up in my available drives for so long I forgot about it. Faulty HDD was the cause. Boot had to read and check the HDD before actually booting up causing the long boot sequence
hello, i have a problem sometimes my gpu is detected and sometimes not with white debug led on my motherboard. When it's not i just need to restart my pc by the power button and it's run ok. Someone can help me ?
I'm having the exact same problem. I checked all the cables that connect to the MSI monitor that connect to the PC and they were all secure and not loose. Took out the RAM out from the MSI motherboard and reinserted the RAM and it only fixed it temporarily. Did the same thing with the graphics card which is about a 7 year old AMD card and hoovered as much dust with the soft head that I could get off, which was dust around the part of the graphics card that slides into the graphic card slot, dust from the fans, the rest of the body of the card. Now my PC is showing display as it should be, but I don't know how long this will last. As I turned the PC on, I thought I would look at the EZ Debug lights as it was turning on and noticed that the one for VGA was white but turned off again. Going by this, I am only thinking that my problem MIGHT be down to the graphics card, but if someone who is an expert on these things would hopefully read what I typed they could make a better assessment of the situation. What I noticed when I started my PC after putting the RAM back in, was that my PC was starting up faster for some reason, then go back to the speed it was usually starting up at which was sort of stuttery.... I have no idea.
@@melodiasrojas8428 Nope, still capricious unfortunately. I will eventually have to upgrade the gpu so I hope it's that... FOR THE PRICE OF THOSE THINGS I BLOODY HOPE!
My motherboard had same feature, some led light if hardware failure. But its not sitting one 1 led, the led on switch from cpu, gpu, and dram. From what i know, it suppose to be like yours. But mine just looping from gpu light, to dram and cpu. Its like pc restarting while try to bootup. Is that mean my psu dead?
I have the same... Lgith up every led and the last vga light up after fast the cpu and restart my pc.... Forever loop.... I remove everything+ cmos but nothing help :(
i have this issue where my vga light is on with no display on my monitor but i dont have spare parts ive tried remove the cmos out n reset the motherboard board reseated the gpu tried troubleshooting with ram sticks but still nothing works any suggestions
Guys, it's basic and probably not help, but u can check, if your processor have F letter on end, you cannot boot using processor/motherboard You need to put VGA/HDMI directly in GPU, NOT IN MOTHERBOARD. It's helped me, maybe someone also have this dumb problem 😂
nice tutorial....sir, how to fix no display but the ethernet port is blinking orange and steady green color when utp cable is connected, all fans are running..
First push the power button several times while everything is disconnected, this dissipates any power left in the computer. Short the bios reset pins then replace the battery. You don't need to spend 5 minutes shorting the pins. It works the second you connect them. The same thing with his 20 minutes of waiting. After unhooking everything hit your power button. These operations happen as you do them. A 20-minute wait doesn't do anything but waste 20 minutes.
guys try to remove ur ssd or hdd, i tried everything and one solution that worked for me was removing my m.2 ssd, i think its damaged thats why my pc wouldnt boot
hey guyz i visited this video because i just ordered a prebuilt pc, its been 3 days already since i had it. it didnt even came with hdmi and power cord so i bought one from store a standard one. then i kept on testing the system to detect any possible issues then maybe on the second day i think i noticed mystic light cant save my rgb profiles for my fans and ram whenever i restart the system the fans may change its lights effect and the ram rgb goes to default so i have to set them back again to my liking. but then on my 3rd day of running the system for general testing of its general health, as i just came back from the washroom i noticed the fans are not spinning and all lights are turned off and i saw a blue led light next to the power button kept on blinking so i researched it in the interned so maybe its hibernating or on sleep. so i pressed the power on thank god it came back on BUT the rgb from my fans and ram are not working anymore so i restarted my system BUT THEN A WHITE LIGHT FROM THE MOTHER BOARD FLASHED for a couple of seconds and then went away. GUYZ im not a tech guyz i cant follow these steps here SHOULD I BE WORRIED and RETURN THIS PC???? IM AFRAID SOMETHING IS WRONG WITH MY PSU? ITS DEEPCOOLPM850D. my system config is i713700k ddr5 32 ram 4070ti tia.
Read the led debug light from your motherboard carefully when you bootup check the light is it sit on vga or cpu or ram if its sits on vga light then it is a problem with bios they used faulty motherboard or they flashed the motherboard bios (flashing the bios is very risky once flash cannot never go back to the old orginal version and if its stuck during bios flash it will ruin the motherboard) i think it is the problem with the motherboard using old used motherboard components when building a pc could be also the problem i also had this problem many times ask your seller is the motherboard under warranty and ask is it new or not and also here the thing you can try remove the cmos battery from your motherboard for about 1 minutes and boot up your pc without battery and see it solve the problem removing the battery will reset bios i hope this will be helpful anyway my English is bad but i hope you understand what i am saying
@@Babinmeitei thanks for the fast reply sir your english is perfect. the company for sure will claim that all is brandnew i paid this system after tax 3.5kcad so it should all be brandnew. iforgot to mention the motherboard btw its z690 pro wifi A from msi. the white light is found at the right top corner of the motherboard, unfortunately i dont feel competent to do what you have done on this video since im afraid il might do something else which can further damage the system. definitely i will contact tech support later on the day and i might just return this system ITS REALLY A HASSLE but what can i do. for my status of living that price is not easy for me to earn so i deserve a good system for what i paid for. last question sir if i need to return this do i really have to package it just like how i recieved it? i find it so tedious how they did it tho.. thanks!
@@chadlineage Yes bro you have to repack same like how it received and if there is replacement policy then do it as soon as possible and calling tech support is also a good option hope they will solved the problem and one question do you plug the hdmi cable to the graphics card port not on the motherboard hdmi replug on the graphics card port try changing and see if its solved the problem
the fck il have to insert those cushions back inside the cpu, damn these guyz really gave me a hassle.. they even forgot to include the powercord and HDMI cable i mean why couldnt the quality control even thought of making sure as its part of the important components of their system and how can i turn on his system and test it without the powercable i just feel theres no heart and quality there . Later if their tech support isnt that helpful im really going to spread it here so that people will be aware, they better watch out. anyway thanks for your insights sir!@@Babinmeitei
It didnt work for me. I FIXED IT, BY REMOVING THE GPU. AND USING THE ONBOARD GRAPHICS. That way I got the monitor working. After that I turned off. And put the gpu (PCI) back on.. and it works fine.
⭐For Business Enquiries Email: babinmeitei@gmail.com
I could not thank you enough. I was watching youtube and my screen turned black and no matter what i did nothing was working. So i restarted my pc and i got the red light. Did your steps and now everything works fine. Thank you again
Dude im watching it rn i will lwt you know if it works
@@devillsfox did it work?
I just got a blackout from my area due to typhoon and it shut down my pc automatically, when i got back to my pc and decided to open it, i had this issue, you just saved my life man cheers to you! it feels great to fix a problem like this where i know im not the most knowledgeable, you deserve a sub!
Me too, after the Typhoon Kristine, my desktop had this issue. Have to this tweak yet, I have to give it a try.
@@Olenboi man grabe si kristine napa linis ako ng cpu dahil sa baklas 🤣
*IMPORTANT* I plugged the dpi cable into the graphics card rather than the default port and it worked just fine. Make sure its plugged into the right port before doing all of this. It saved me a lot of work. I didn't have to unplug anything except for the dpi cable.
I had this exact same problem. I did all what was stated in the video. It started happening after a period of time. I searched the net and got my answer. My PSU had become borderline due to updating my Ram and adding some more cooling fans. I simply ran out of power to run the GPU effectively. I upgraded the PSU from 650w to 750w and hey presto all works fine. Just thought I would share this as it took me forever to get rid of this VGA debug led.
i have 1200 watt and this problem remains
@@rocketleague2136i have a 750w psu
@@rocketleague2136ever find a solution?
I got exactly the same problem. With two identical mothers!!!!
MSI B350 PCI mate and MSI B350 tomahawk. Both death exactly the same way.
I suspect, maybe could be because both were updated with the last BIOS update from MSI?
I really don't know the problem origin, I'm really desperate and frustrated...
@@Wolverine1981same here man
Don’t do this to your PC you’ll end up messing up even more. Sometimes just disconnect the VGA wire that runs from your GPU to MB. And do a Restart.
Did that and didn't work
Also tried removing the GPU, cleaning the yellow part that connects to the MB, didn't work 😕
Camos battery remove while off computer after 5 min put it back @@MrCruz-iq3sc
Update: Turns out the GPU broke. After 4 years of usage.
I'm now a Radeon 6700 XT GPU from a Vega 64 Sapphire Nitro+ owner
@@MrCruz-iq3scwhen you were trying with the broke GPU the fans were moving or the leds were on? I'm afraid that my gpu may be broke too
@@tomasferrante9528 The GPU LEDs turned on but the fans did not spin
Thanks! This got my computer working again, I thought my graphics card died or something
Thank bro you saved my $3k pc and ik didn’t want to send it back but thanks again you saved my life ❤
Bro really be out there saving expensive computers. Thanks, you helped me out a lot
I was playing a video game and never had any issues and all the sudden my pc I think reset its self but the screen went black and the keyboard and mouse lost power for 30 seconds the display never worked again I tried switching monitors I tried cmos reset I tried one stick of ram I unplugged no replugged everything all parts turn on and work perfectly fine like they did before it’s just that I get absolutely no display and now the usb ports are funky. Please help I’ve tried so many things I can’t figure it out and don’t have money to replace it I just got a new gpu for it as well I also tried switching to different display settings and used DP instead of hdmi nothing works
If you cabinet rgb is still on when powering up then it could be the problem with graphics card or cpu and if the rgb of your cabinet is on when booting up your pc then definitely it is the power supply i guess the power supply is dead check the power is working of not by inserting pin touching black wire and green you can watch video if you dont know how to check the smps is dead or not and also read the led debug check on which white light sits on is it on ram, cpu, vga if its sit on vga then it is the problem with graphics card
how did u fix I'm literally having same problem with you I bought new ram new GPU still not working I wanna cry rn reading the comments section
@@Stinger32 I had a faulty gpu
@@Stinger32 if u hae ur old gpu put it in and see if it works if it does ur gpu needs to be returned if it does not then swap the ram and see
Same bro, my gta crash and when i try to open again, i lost signal, keyboard and mouse, and the red light vga starts mehh (sorry for bad english)
The VGA light is still on and I'm not getting any post to the monitor after following this step by step guide
me too
did u find a solution?
Same
i am also not getting num lock led on keyboard
@@somadevi4883 same now did you find a solution ??
i got new parts and built my PC and it didnt show on the screen. ive tried the basic stuff but havent removed battery or used screwdriver, i think on my motherboard it has 2 switches, one reset and other flash. ive tried them and it didnt do anything i can see. i gave my pc to a guy who may get it working but he said its either CPU or motherboard and he thinks its the motherboard because the orange VGA LED light is showing on my Gigabyte AERO G Z790 motherboard and the CPU i have is i7 14700kf and i cant update bios without it showing on my monitor. do u suspect my motherboard to be faulty? im sure the CPU is fine. and my GPU works in old system so thats fine. i spent hell of a lot and got parts from germany and waited so damn long i feel im gonna struggle to send it back and get refund or whatever. seriously its been a nightmare of over 2 months getting parts from places.
Accidentally Bent CPU Socket Pins On Motherboard can cause no signal so check if there is any bent in motherboard or cpu and this usually happened when we not properly intall the processor on motherboard so check if there is any bent
@@Babinmeitei its 14th gen it doesnt use pins
@@Babinmeitei also had some pc guy look at it and even he said it might be CPU or MOB.
@@sasproductions701 it might be the motherboard socket pin is Bent
@@Babinmeitei ill have a look when i get it back tomorrow. thank you so much for replying back bro seriously.
PSA for those who did the simple diagnostics and didn’t work. Try either cleaning the PCiE slot. If your CPU has a IGPU, run the IGPU (remove the dedicated GPU and just run with CPU) and see if it posts. If it does not and the CPU is a known good CPU, sadly your board is a bust.
It’s really weird what happened in my case. I was using my old motherboard because I couldn’t use my current one because the cpu was busted, when the new cpu arrived I installed everything from the old board to the new one and it posted except for the gpu (even though it was working on the old one) then I switched back to the old one and used 2 different gpu’s and both didn’t work. So it’s not likely to be the motherboard, it could be the psu or rams or ssd or basically anything. I’m so frustrated
@@Nb_2089 I'm in the same situation. New motherboard, new PSU, tested different ram, different PSU, different GPU, and still can't find the source of the problem.
@@danobra
For me the issue was the pcie slot itself, it just stopped working. I installed the gpu to the lower x4 slot and it worked so I ordered a new mobo and tested on it and everything worked
Bro I have the same problem but the slot worked for an old 710 I tried, my gpu isnt detected at all in task manager and its not the ram or the cpu. This is really frustrating. Any solutions would be welcome.
Hi, I bought this card from Amazon. I installed this card in my PC. All the fans work but I have a black screen with no signal. Do you think the motherboard is broken?
I once tried to install Linux pop os if I'm not mistaken and everything was working fine but after I tried to install Nvidia drivers with some command coz that's what you do on Linux everything is a command
and that was the biggest mistake of my life
my pc been on life support since , everything is switching on axcept for the display
I've tried everything on UA-cam
MASSIVE THANK YOU CHEERS MY MAN...HELPED FIX MY MSI M.BOARD..
Ive tried reseting bioa through cmos and jbat1 and it didnt wprk unfortunately. I get display when the gpu is in any slot but the x16, and the x16 works sometimes but stops working if i restart. Whats going on?
I have this problem. MSI Board as well....
Update:
Fixed the issue. It was all due to a faulty cougar psu.
Is it true? Mine is also MSI, and I'm still confused about replacing the PSU or motherboard
I had this problem too with intel i7 11th gen paired with a rtx 3060ti ,showed red vga light. At first dismounted my gpu and putting back in place at every startup would solve my problem but kind of painfull to do each time. But as soon as I removed the second ram there is no more vga light and it starts up normally
Was it a RAM issue? I'm having similar issue like you
@@shLowKeyI really don’t know. I’ve put back the ram in place and now the only way to start my computer is to unplug the hdmi cable start the computer and wait until my keyboard and mouse light up then replug the hdmi and it works.
@@CustomRcCanada I figured out my issue. The VGA debug light would come on the motherboard. No POST or BIOS... After 2 mins, the BIOS would come up. I checked the storage drives and my SSD with Windows installation was not detected. So I removed the SSD and now there is no VGA light and I'm using another SSD with Windows and PC is working fine.
my motherboard gigabyte H410M H V2 (rev. 1.8) does not support my AMD RX 580 8 GB GPU, what to do ? appreciate your help...thanks
Mines odd, i have an issue whete sometimes it shows on boot up but sometimes it doesn't and later on my pc will lose display n wud crash (idle and during gaming)
Did you ever figure it out? Been having the same problem with my 3080 would love a response asap
Having the same problem with my 3070 ti
Me too
Something may be damaged. It could even be the psu
im thinking the same thing, my guess was the power connector for the gpu is fked n my psu is non-modular :') i have it working for now so cba to buy a new psu n replace it tho when i do im getting modular for sure
@@viperonpcisgoat
I found out that this white light is not only vga, a friend of mine got this issue and the issue got solved after removing all sata drives from the connections. A ssd was defect which caused the issue.
Was it sata or nvme
Can I wait 20 minutes after removing all pc components?
Having similar issues on my b760-i i 9 mine is only 5 months old every thing was great no problems until now the only thing different is i disconnect all cords and moved my pc to a different location for a few days im in fla
Now nada stuck on yellow/green light
Is this really going to work? What is the difference of quickly shorting the cmosclear pin and leaving it more than 5 minutes?
That's what I'm thinking
None. 15 seconds or 15 minutes it is all the same.
Dude I’ve tried everything the vga light is still on . I applied a new cooler to my cpu. I resetted the cmos on every gpu I have it didn’t do anything
Please advise my pc monitor is blinking, flashing , what should I do
1:16 do i do this step while all socket is disconnected?
this happened to me and I was experiencing this for a month. I did all the things from this and other tutorials but still did not fix it. I finally went to a repair shop and they removed something from the back and its fixed. I asked what he removed and he said it was a cable going to my HDD. I was like, I dont have a HDD. he showed it to me and I remembered I actually have an HDD before and maybe because the HDD broke for a long while back and did not show up in my available drives for so long I forgot about it. Faulty HDD was the cause. Boot had to read and check the HDD before actually booting up causing the long boot sequence
nah
Same exact problem, same exact solution. Thanks a bunch @Inbanzon❤❤
hello, i have a problem sometimes my gpu is detected and sometimes not with white debug led on my motherboard. When it's not i just need to restart my pc by the power button and it's run ok. Someone can help me ?
I'm having the exact same problem. I checked all the cables that connect to the MSI monitor that connect to the PC and they were all secure and not loose. Took out the RAM out from the MSI motherboard and reinserted the RAM and it only fixed it temporarily. Did the same thing with the graphics card which is about a 7 year old AMD card and hoovered as much dust with the soft head that I could get off, which was dust around the part of the graphics card that slides into the graphic card slot, dust from the fans, the rest of the body of the card.
Now my PC is showing display as it should be, but I don't know how long this will last.
As I turned the PC on, I thought I would look at the EZ Debug lights as it was turning on and noticed that the one for VGA was white but turned off again.
Going by this, I am only thinking that my problem MIGHT be down to the graphics card, but if someone who is an expert on these things would hopefully read what I typed they could make a better assessment of the situation.
What I noticed when I started my PC after putting the RAM back in, was that my PC was starting up faster for some reason, then go back to the speed it was usually starting up at which was sort of stuttery....
I have no idea.
Nope, still the same. Not turning on. I don't understand. Sometimes it works fine and sometimes it just doesn't want to turn on properly with display.
You fix it? I have the same problem
@@melodiasrojas8428 Nope, still capricious unfortunately. I will eventually have to upgrade the gpu so I hope it's that... FOR THE PRICE OF THOSE THINGS I BLOODY HOPE!
@@marinelemeur156 dam i gona send my to repairs and see ...i will have to buy a cheap gpu for now becuse i need it for work too :😞
@@melodiasrojas8428 Mine's a rx 5600xt so it's starting to show a bit of age already...
@@marinelemeur156 my is a gtx 1660 super so same lol ima save for something better in the future too
Thanks mate! This worked for me!
I also cleaned the pins of the cpu and the socket of my B450 board.
instructions unclear my pc became a jet fan
What if my build is new (I’m testing the parts) the vga light is on but I’m getting signal on the monitor?
should flash on initially when booting, its if it stays on its an issue
I have to use jumper on 24pin for turn on pc but still showing no signal. Cpu is not heating up
My motherboard had same feature, some led light if hardware failure.
But its not sitting one 1 led, the led on switch from cpu, gpu, and dram.
From what i know, it suppose to be like yours.
But mine just looping from gpu light, to dram and cpu. Its like pc restarting while try to bootup. Is that mean my psu dead?
I think its just checking each. If it remains on, then that component has an issue
I have the same... Lgith up every led and the last vga light up after fast the cpu and restart my pc.... Forever loop.... I remove everything+ cmos but nothing help :(
i have this issue where my vga light is on with no display on my monitor but i dont have spare parts ive tried remove the cmos out n reset the motherboard board reseated the gpu tried troubleshooting with ram sticks but still nothing works any suggestions
Were you able to fix this? I am having the same thing :c
@@jasonweaver5202hbu? xd
Guys, it's basic and probably not help, but u can check, if your processor have F letter on end, you cannot boot using processor/motherboard
You need to put VGA/HDMI directly in GPU, NOT IN MOTHERBOARD.
It's helped me, maybe someone also have this dumb problem 😂
nice tutorial....sir, how to fix no display but the ethernet port is blinking orange and steady green color when utp cable is connected, all fans are running..
Same happening to me right now
Do I put the bios battery back in then short the pins to reset the bios ?
First push the power button several times while everything is disconnected, this dissipates any power left in the computer. Short the bios reset pins then replace the battery. You don't need to spend 5 minutes shorting the pins. It works the second you connect them. The same thing with his 20 minutes of waiting. After unhooking everything hit your power button. These operations happen as you do them. A 20-minute wait doesn't do anything but waste 20 minutes.
Thank you for the reply I will do that hope you have a good day :) @@CharlesSmith-io9fp
To all gamers across the globe, I feel your pain.
guys try to remove ur ssd or hdd, i tried everything and one solution that worked for me was removing my m.2 ssd, i think its damaged thats why my pc wouldnt boot
MSI is brand of big problems
Did you fixed it?
@@SobhX7 yes, with ch341a and bios flash cable
Agree, my msi board sucks. Got the exact same issue every single time i disassemble my pc to clean it.
Never buy from them again.
@@reizalash1443did u fix it?
having the same problems with gigabyte
hey guyz i visited this video because i just ordered a prebuilt pc, its been 3 days already since i had it. it didnt even came with hdmi and power cord so i bought one from store a standard one. then i kept on testing the system to detect any possible issues then maybe on the second day i think i noticed mystic light cant save my rgb profiles for my fans and ram whenever i restart the system the fans may change its lights effect and the ram rgb goes to default so i have to set them back again to my liking. but then on my 3rd day of running the system for general testing of its general health, as i just came back from the washroom i noticed the fans are not spinning and all lights are turned off and i saw a blue led light next to the power button kept on blinking so i researched it in the interned so maybe its hibernating or on sleep. so i pressed the power on thank god it came back on BUT the rgb from my fans and ram are not working anymore so i restarted my system BUT THEN A WHITE LIGHT FROM THE MOTHER BOARD FLASHED for a couple of seconds and then went away. GUYZ im not a tech guyz i cant follow these steps here SHOULD I BE WORRIED and RETURN THIS PC???? IM AFRAID SOMETHING IS WRONG WITH MY PSU? ITS DEEPCOOLPM850D. my system config is i713700k ddr5 32 ram 4070ti tia.
Read the led debug light from your motherboard carefully when you bootup check the light is it sit on vga or cpu or ram if its sits on vga light then it is a problem with bios they used faulty motherboard or they flashed the motherboard bios (flashing the bios is very risky once flash cannot never go back to the old orginal version and if its stuck during bios flash it will ruin the motherboard) i think it is the problem with the motherboard using old used motherboard components when building a pc could be also the problem i also had this problem many times ask your seller is the motherboard under warranty and ask is it new or not and also here the thing you can try remove the cmos battery from your motherboard for about 1 minutes and boot up your pc without battery and see it solve the problem removing the battery will reset bios i hope this will be helpful anyway my English is bad but i hope you understand what i am saying
@@Babinmeitei thanks for the fast reply sir your english is perfect. the company for sure will claim that all is brandnew i paid this system after tax 3.5kcad so it should all be brandnew. iforgot to mention the motherboard btw its z690 pro wifi A from msi. the white light is found at the right top corner of the motherboard, unfortunately i dont feel competent to do what you have done on this video since im afraid il might do something else which can further damage the system. definitely i will contact tech support later on the day and i might just return this system ITS REALLY A HASSLE but what can i do. for my status of living that price is not easy for me to earn so i deserve a good system for what i paid for. last question sir if i need to return this do i really have to package it just like how i recieved it? i find it so tedious how they did it tho.. thanks!
@@chadlineage Yes bro you have to repack same like how it received and if there is replacement policy then do it as soon as possible and calling tech support is also a good option hope they will solved the problem and one question do you plug the hdmi cable to the graphics card port not on the motherboard hdmi replug on the graphics card port try changing and see if its solved the problem
the fck il have to insert those cushions back inside the cpu, damn these guyz really gave me a hassle.. they even forgot to include the powercord and HDMI cable i mean why couldnt the quality control even thought of making sure as its part of the important components of their system and how can i turn on his system and test it without the powercable i just feel theres no heart and quality there . Later if their tech support isnt that helpful im really going to spread it here so that people will be aware, they better watch out. anyway thanks for your insights sir!@@Babinmeitei
It didnt work for me.
I FIXED IT, BY REMOVING THE GPU. AND USING THE ONBOARD GRAPHICS.
That way I got the monitor working. After that I turned off. And put the gpu (PCI) back on.. and it works fine.
Thank you so much broo removing nd reinserting the battery worked!!!
thanks a lot ,for everything ,you gained one subscriber
still didnt work still no signal
Thank uh my problem is fixed
SI FUNCIONA, pero ojo deben hacerlo paso por paso minuciosamente
This crap happens on every single Amd motherboard of mine
Ive have nothing but nvidia and now dealing with this for the second time :/
@@kyleszydlo407 Im referring to the motherboards specifically, honestly in my experience the gpu led almost never had anything to do with the gpu.
Thank you.
I ain’t doing all that
3410 Bartell Mission
I have problem like dat on dram ez debug bro. Help please
2642 Erich Keys
Thanks
Thank you bro! ❤❤❤
BRO IT WORKING AFTER SOME TIME SAME PROBLEM
Schmidt Throughway
McLaughlin Mill
3491 McGlynn Freeway
114 Jordi Crossroad
117 Boehm Ford
3710 Rau Station
Alayna Center
Murray Pine
Rath Forks
Susanna Skyway
Logan Corners
Mariam Motorway
270 Hessel Plaza
219 Hamill Turnpike
Cremin Lights
Anastasia Shoal
Gorczany Mountain
822 Tromp Key
Brekke Ford
Runolfsson Freeway
Sawayn Pass
White Vista
Jeffrey Camp
Kuhic Spur
Meghan Rest
Jacobi Walk
Swaniawski Mountains
Modesto Way
Ernser Island
This worked
Thanks bro❤
Rubbish
Thanks bro really appreciate it ❤❤
thanks, works for me!!!
I also has same Monitor
In other words, you should have bought a Mac.
67838 Hartmann Overpass
0238 Nils Ville
04632 Shanny Orchard
46397 Welch Via
Thank you