I am aircraft mechanic. We do the same thin g for troubleshooting, use known working parts to swap out till you find the issue. Saves millions of dollars a year. Thanks for the video.
These types of videos are less than worthless to the average consumer. The average person doesn’t just have a shelf full of spare parts to swap in and out. People who do have a shelf filled with parts already know how to do this. So who is this video for? Oh to have people who are having a problem click and get no help. Cool. What a joke the whole computer industry and tech UA-camrs are.
@@sergiod1618 mine also was, I even grabbed my computer and the graphics card to the office where they assembled it for me. The card was fine on ALL of the other computers, and ALL other cards were fine on my own pc, after a couple of days, trials and errors I couldn't figure it out so I returned the card and thought to buy another one to test, but I haven't got the chance to yet..
Figured mine that it was either the bios settings or the static. Fixed mine by removing the gpu, then the cmos battery to reset the settings for five-6 min, hold the power button for thirty sec to drain the static, and finally plugged everything back. GPU now displays. IMPORTANT: (Make sure to have done the unplugging method above before proceeding) Also make sure to understand the BIOS configuration for the display. Sometimes, PCI-E (Display output for the GPU) gets interchanged with the iGPU (Display output for the integrated GPU of your CPU; most Intel CPUs have this) or the other way around. To check if that's the case, you can try plugging your monitor to the iGPU instead of the GPU or the other way around and check if it turns on. If it does, then there's a possibility that your BIOS is not properly configured to show display through your other display output. You can find it in most BIOS under 'Display Configuration' or the likes. Hope it helps!
@@blank4700 please bro can you explain i am having same problem how did you do that what do we have to do exactly first remove GPU and CMOS then hold power button for 30 second and then wait for 5-6 min and plug back that's it ? Or anything else pls reply
Hi guys one thing that you should check before doing any action is your motherboard cables connection, try to replug each cable at be sure that's well inserted, that was the issue that I faced pretty stupid 😫😫
If the motherboard's the issue, then try removing the cmos battery for 15 minutes or using the screwdriver to touch the cmos pins for 15 seconds to short circuit it. What that will do is reset the cmos (BIOS). That helped when my PC wouldn't post cuz of me being an absolute dumbass for messing with the XMP profile.
@@khushisingh-sj8wi he’s not trolling, with the pc off and unplugged there’s two little pints that if you connect using a screwdriver it’ll reset the cmos
Hey man i have the issue in the video right after i got a new motherboard and i went into the bios to enable xmp and after that my pc stopped posting do you think the cmon reset will work?
@@FunnyKaden555find two pins somewhere on your motherboard it’ll have writing next to it called CLR_CMOS turn your psu off and get a screwdriver and place it in the middle of the pins and wait for 15 seconds turn pc on and your cmos will be cleared
I actually switched my hdmi cable to the older cable and it worked. It was all about the bios system settings. It was not setup to detect pci-e or hdmi on the motherboard. Just the standard regular old vga cable fixed the problem for me
Same here. After a cpu upgrade, the PC turned on fine, but after some "cable management" in my ancient pc case (during which i did reset the BIOS), i couldn't get any display, even tho every part seemed to work as it should. Eventually (i'm not sure if i read it somewhere in a comment or if it was sheer desperation) i swapped the HDMI cable and plugged the GPU via the VGA one and BOOM, pc booted no problem.
@@sunseth1384 yeah i hate this problem, this evening i spent hours fiddling in front of a bit impatient people who's probably knew better than me, i knew there's something wrong with the motherboard or the bios but wtf can i do when resetting bios didn't work and nothing is broke? but out of all thing, changing display cable fixed the thing. i probably didnt really clear the cmos or something, shit is weird, sometime restarting it about a dozen time will solve itself like nothing happened.
My pc boots up I can see the asrock logo after a few seconds The display goes off, the computer is working fine,the keyboard mouse too,after I disconnect and connect the VGA cable,the display shows up,sign in(windows),I think it's a cable or monitor issue,what else could be the issue?
I suspected the board to be the culprit in facebook simply by knowing that the chipset was a b450 type, but I didn't actually think that it would be faulty though. One thing is for sure there would of been no other way to know for sure, without swapping it.
If it still not showing anything try pressing (windows icon+ctrl+shift+b) while the pc is still running Then turn it off by pressing the button Turn it on It's gonna ask you for boot by pressing f1 (don't boot anything) press shift+alt+delete It helped me when nothing else did (I seriously tried everything) gl
Sumwhere in the comments sum1 mentioned it was the screw on the cpu fan that was tightened too tight, cant find the comment bt to THAT GUY... THANK YOU... you changed everything for me... fixed my problem. Had two problems... 1. Took entire pc apart until it was just power supply and motherboard (cpu and fan/heatsink still connected) and turned it on, still orange light then I read your comment and loosened the screws a little and hit power button... BOOTS TO GREEN LIGHT. 2. I then inserted all four ram cards and again got the orange light so I insert and start test each ram slot one by one, it was the second ram card so I swapped second and forth card around and started up, SHE PURRS BEAUTIFULLY. It also cud be the bios hard resetI did bt for me... loosening the cpu cooling mount/fan was where everything changed, got a different result from all the tests I did. So thank u for channels like this and people who comment. The vid may not solve your problem bt a comment might. Keep it up guys.
Hi, i bought a new GPU BUT no booting and only 1 beep every few sec and i really think the Graphics card not detected by the BIOS (already updated) or motherboard (vostro260) ! any tips ?
I need help! I’m finished my first PC build and the test outside the case went well, the bios showed up on my motherboard and it was dandy! BUT now that it’s inside the case and everything is still running, I plug in my DP cable into the GPU and into the monitor but now the monitor says it’s receiving NO signal from the DP cable. I’ve got no idea what’s wrong
@@hamadkd7017 Hey! The issue fixed itself. Idk how, but after 18+ hours it started working. That’s not useful but I’d say leave the plugs in and come back to it. Hope everything works out
The easiest way I did was to check the beep sound when I unplugged all the RAM. Without RAM there would be long beep: 1. If the beep does not exist (you must make sure the speaker buzzer system of motherboard is fine, some motherboard failed to beep at all or your buzzer is broken/reversed) then it must be either the processor or the logic/Super IO motherboard (which is hardest) and after changing the processor to known working & compatible one still does not sound beep then it is clearly the motherboard issue which require advanced electronic test such as MOSFET and voltage output. 2. But if there is a long beep then most likely just VGA (Graphics Card) or RAM issue. Some motherboards (not all) will generate unique sound if the VGA is failed. Try using onboard or switch to another VGA. If the problem persist try replugging RAM to different slot or change the RAM to known good one (borrow one if you don't have). If you are a technician usually you have something like "PCI Tester PC Analyzer Diagnostic Card" to show the current code that the motherboard is currently stuck at. PS: I'm a PC technician for 8 years.
Hi, I have two motherboards that stopped working on the same day, It's a little weird. One gives one long beep and the other one long and 2 short. Is it possible that the power supply killed both? The power supply is otherwise not used.
Mine stopped showing images after stopping an overclock. I got the Alienware r10. The OC is the system preset so youd assume its safe. Literally tested overclock to see the difference. To go back to normal clock it did a restart aaaaaaand no signal. Resat the ram and gpu. Monitors work fine and the pc boots except it runs the rgb like for 5 seconds, goes black, repeats. Doesnt sound any beeps for system errors... Im confused af.
First things first to ever try when you get this problem is to unplug the powercable, then remove the battery on the motherboard becuase many MANY modern motherboards get fucked up then move around the PC and somehow the motherboard loses its "memory" or something.. 19 of 20 times its its so simple atleast.. cheers!
My pc was working fine till recently. It was working on 2 X 8gb ram. Now it only boots on 1x 8 GB ram with no issues on any of the 4 slots and boots silently. When I boot with 2 X 8 GB ram, there is a noisy fan sound and no display and after a few seconds, the pc goes into a boot up loop. I've test both rams individually in all slot and they work. I've even swapped out the CMOS battery. Please help can't figure it out
Thank you for spending 5 mins talking about the specs of that PC... So useful.. it's almost like I searched "how to hear random shit that has nothing to do with what I'm looking for"
Hi there i have watch some of your videos on PC repairs, especially the one that says PC turn on LED light on, fan spinning but no display on monitor. Please i have the same problem on my computer and also there is a steady white light on the motherboard around the that says VGA debug something i can really remember. Is there any way you could help me. Please.
i have the same problem, with the difference that one out of every 20 times, or so, that i turn on the pc i can acces the bios. can you please tell me if you were able to fix it, and if you could, what did you do?? at this point i dont know what to do, please 🙇♂
Hi there, no the PC is still not fix, actually when you turn on the computer, everything seems to be working normally, the fans are spinning, led lights are on, but there is no display on screen, and also mouse and keyboard are not responding, then i notice there is steady white light on the motherboard where it's written CPU. Is there any way you could help
my problem is that i changed some settings in the bios and when i left bios it was just black screen. I turned the pc off and back on and it did the loud thing that it always does when it boots on but it did it infinitely PLEASE HELP!!!!
Change new ram, still not working. Change power supply, still not working, Reset CMOS, still not working. New Motherboard, still not working.. How about CPU ? If CPU problem, you still can boot ?
@@HealMyTech1 actually its the exact same problem. no display showing and all lights powered on. My worst fear was I fried the mobo but no, that's not what happened.
I need help , when my uncle transferred my ram to the new pc to test out if the new one ram is faulty. Then when he put it back on my pc , my pc doesn't display anymore even tho the system is powered on. The cpu ez debug light is blinking white light in few secs in startup then a hold white light after those seconds , we tried cleaning the ram and the ram slot , put in diff slot , and still doesn't work. So we tried resetting the bios , check the cpu if it has bend pin , the cpu is ok but still not working.. Sorry if my english grammar is bad.
my pc turns on but the led lights don’t work and the screen is straight black but the ram i’m trying to install is brand new i’ve tried everything from all types of videos and comments and nothing is working
@pierdolek1236 troubling shooting mine this Monday I'll get with you on if this worked. I have the issue where everything turns except my gpu I have changed the board and kept everything else the same and everything booted up but I still want to fix my board since i had to use a friend's to figure that much out. Clearing the cmos definitely did something tho because at first mine didn't even have the cpu fan spinning
Please help me, I assembled a brand new pc, it powers up motherboard light is on, keyboard light is on, mouse light is on. But no display. I've visited quite a few shops but everyone said GPU is faulty. I tested my GPU on my old dual core pc and it's working. Now everyone is saying the motherboard is faulty. Ive done most of the troubleshooting, power supply is working. I'm really confused if its the motherboard or cpu or just maybe I should hardreset the bios setting and try. I was unable to find any guide on how to reset my motherboard. My parts are: i3 10100f, MSI H410m-a pro, 16gb RAM ballistix, GTX 1030 DDR5. Antec B550 power supply
The issue with my motherboard is that mine has a button labelled as CLR_CMOS2 instead which seems unique from other mobos, i havent seem this with other motherboards. (MSI X470 Gaming Plus). What i did was just shut down the computer and unplug the power cord that connects to your computer and flip the switch, once thats done. I pressed down on CLR_CMOS2 for 15 seconds or so and let go and plugged back everything and it worked. Update: I had the same issue again, i had it two more times and fixed it the same way i explain above. Its kind of annoying and im concerned about what's wrong. Can you suggest akhi pls what the issue might be?
Hey my man I hope you got your problem fixed. But for everyone reading your comment from now on let me say that if you're facing this issue frequently and you're solving it frequently by resetting cmos, you should replace the battery.
Dude i wanna thank you. That eraser move worked amazingly with my computer. Its showed no signal and i did as you said. And now my pc is up and running thx for your help
Hi, hope you are doing well. I got the same issue with my Dell Inspiron (i7 4790 processor). It was installed in an i3 casing previously. I bought the Gamdias Athena E1 Elite ATX Micro Tower Gaming Case (1 ARGB Fan) (1 Black Fan). And my PC was working fine but when I swapped it to new case, my PC stopped giving the display. My PC bios got corrupted by swapping. So the technician did new bios but it still didn't gave display. I took my PC to a new technician and he just plugged out the power button with the wires from the previous casing and shoved it in the new casing and my issue got solved. Now my PC has duel power bottons. Turns out that the jumpers and the system security from the previous casing were the only way to make my PC function again.
@@heyitsleyy if its not working, u need to troubleshoot it 1. U can try insert your gpu in other pc and try turn it on, if the display show up as usual, that gpu should be no problem 2. If u dont have other pc, try integrated graphic on your mobo, if the integrated graphic shows display, your gpu or gpu slow might have some problem 3. If u already try your integrated graphic and still no display, try change your display such as your tv, if your tv show up display, then your monitor might be problem, u need to try both integrated and gpu, to more comfirm, u try using ur pc on other monitor.
Hey I don;t know if you'll reply but I have a laptop, it once froze and when I restarted the screen was lit but black, wen to safe mode after reseting, newly installing windows everything I found out if I remove display drivers it works but with amd ryzen display drivers it doesn't work but without the driver I can't change screen brigthness and it always stays high and many things don't work properly. What's causing it? I've paid 2 repair shop and they just reset driver and stuff same as me and the issue continues I've been just wasting money but no fix.
I had a CPU issue a few days ago. Same thing as in the video. RGB and fans turned on but no display. Thing is my GPU RGB wouldn't turn on which made me doubt if it was the CPU or the motherboard. A blue electric spark appeared in my pc before it happened, so anything was possible. So I just went to a pc store and got a compatible motherboard and CPU and I explained my issue and that I needed to do some testing. They told me I could return the hardware if it was in perfect state. I was still under warranty for my own components, but I didn't want to wait. That's how I did it if you don't have component, albeit a expensive solution. But you do get your money back in the end. Found out it was the CPU and returned the motherboard. Now I sent my old CPU for repair, but I still kept the new CPU. (Secretly did a slight cpu upgrade too, because it was actually a bottleneck anyway) So I got my money back for the motherboard and now I'm waiting for a replacement for my old CPU and will sell it after.
I have this exact same issue with my new build but don't have spare parts to test, ryzen 7 3800x with bf450 board, swapped ram, took mb battery out and put back in, motherboard and gpu light up and all fans spinning, just won't post, do you think it's the new motherboard? It seems exactly the same as this
Oh I also plugged a speaker into motherboard and I get no beeps at all when turning on, also the build won't shut down when I long press the power button, I have to switch off by psu power button
@@Exo1c.armaan ended up sending mb back and buying a different one, worked straight away with new board, maybe the board I sent back needed the bios updating, I'm not sure but was defo the motherboard, maybe try updating the bios as that's the only thing I didn't try
My PC has a red and orange light when I turn it on and not display. The lights go away after like 5-10 minutes and the display turns on. Everything works fine once there is a display but obviously it's not supposed to be like that.
I am very suspicious it's my motherboard causing the issue. It had been repaired once for the same issue. But now, I decided to buy a new motherboard. I'm done dealing with shit. Good video by the way.
I have a Lenovo laptop which switches on, when the screen lights up it has the Lenovo logo with preparing automatic repair. Then another screen appears headed choose an option. The only one that takes me forward leads to another screen: Automatic repair. However, this like the rest leads back to the first screen: preparing automatic repair! What can I do?
If my computer going to post after turning off my psu, and when I restart it didn’t go to post- failure is my psu? So when I switch psu my computer have going to post after 4 save+reset in bios, on fifth restart it didn’t go to post.
Today I replaced the pads on my MB and GPU heatsinks, but had forgotten to plug the CPU cable in after reassembly. I panicked after getting no image and thought I had short circuited my graphics card. So I found the cable while watching your video, and now my PC works again lol!
What if my system posts even after trying hard to get this motherboard to post and then after some time it crashes in windows 50-50 chances to crash? CPU- Core i3 6100 MB - GA-H110M-s2 SSD- Kingston A400 Ram - Kingston 4gb DDR4 2400, Hyperx 8gb DDR4 2400 GPU - Hd 7870 Psu - CM MWE550 Bronze Motherboard was not powering on earlier, light and fans used to turn up for a sec and nothing after one spin. After some time it was spinning continuously like no power to cpu but never post. And after some ram adjustment and replacing rams it did post and now I'm facing crashes and sometimes the same no post but posts after turning on in sometime
I recently build a new PC and was getting the boot and display lights, the graphics card was connected via display port and Dvi and still no image. I was getting desperate só I finally plugged a hdmi cable and it finally worked, I don't know if it is a driver issue but I still can't acess the Bios screen if I have the monitor connected using Display port, I tried to update the Nvidia driver to display port 1.4 but get an error evertytime.
What if the MB is so faulty it blows your test cpu or other test parts as it did in the original PC ? For instance when the power on the MB is shorted or something ?
I tried to overclock my RAM. My Omen 30L powered off. Then it powered on and I heard 3 beeps. It powered off then on again followed by 3 beeps. The system is in but I don't see anything on my screen. How do I fix please?
that board shouldve never been paired with that cpu without active cooling on the VRMs or after market heatsinks applied those VRMs cant handle the core count and power load without overheating. He'll just have the same problem as before. Buy a bunch of old or defective boards for their heatsinks theyre usually the exact same hole spacing
i have an orange light when i turn my pc on, but i can use the pc properly and display shows, am i going to have any problems later if i continue using my pc with an orange light on in motherboard ?
Greetings,my problem is that my pc boots but I get vga light and 3 beeps,any idea? Msi mpg b550 motherboard Thermaltake 630watt psu 2 rams hyper x 16gb Gtx 3070 gpu (I Also checked with another) M2 Samsung ssd
I have this problem but im not really sure if its the same. Heres the issue: Problem: No display but with power just like yours. Issue #1: Gpu(connected) = No display with power and fan is spinning but keyboard and mouse not turning on Issue #2: Gpu(disconnected) = No display with power and fan is spinning but keyboard and mouse will turn on and I can see the light of capslock led and numlock led. My question is what would be the cause of this problem? Is my mobo good because it shows that if my gpu is not connected my keyboard and mouse will turned on? Or my psu is bad and doesnt give enough wattage? Also I dont have iGpu. Im using ryzen5 2600 so I cannot tell if my pc is booting up to bios when the kboard/mouse is turning on. My gpu is good tho because the Tech tested it and I saw it myself.
I installed a new gpu and the pc wont boot up I unplug the power from that gpu and it turns on any idea would a low wattage power supply cause this? Or could the gpu be dead?
I just have this problem ..i just get a3070before just use intel.uhd770 (13700k) . After installing to the mobo it turns on normaly.. but after i install the driver ..and start gaming it suddenly off and no boot no screen at all. So i switch back to my uhd 770 intel at the moment is works just fine. Is this because of my PSU not meet the req ? I have Antec 700watt 80+ Bronze. I need help thank you verymuch. Thanks.
My pc boots up I can see the asrock logo after a few seconds The display goes off, the computer is working fine,the keyboard mouse too,after I disconnect and connect the VGA cable,the display shows up,sign in(windows),I think it's a cable or monitor issue,what else could be the issue
I'm worried because I just build a new pc and 1 month using I got a black screen 2 days ago and can't solve it. The pc turns on but I can't enter in bios. Motherboard is b450m gigabyte and gpu is rx 6750xt. I hope the issue is not my graphic card.
I have a Acer Aspire f5 572g 57pv laptop and after trying to overclock my laptop and hitting f10 in bios to save and exit, my laptop got stuck in a black screen every single time I try to boot it, no logo, no bios no nothing, just a black screen, I have tried to cmos reset by removing the bios battery, I tried it 3 times, longest time I waitted before putting it back in was 1 and half an hour, I don't know if this is because I have a bios password (yes ik the password I just need to enter bios to reset it but there is no display), I tried looking for cmos jumper but couldn't find it, please help 😦
I'm having the same issue. Everything turns and spins, but no signal. I swapped my GPU into the lesser PCIE slot which is 2.0 and it works. I think I fucked up my PCIE 3.0 slot, but i''m still testing
One of the most common problems is a dead/or dying CMOS battery. When I have any POST problems, I insert a new battery. If the battery has gone SOUTH, you might see a message informing you that the system clock needs to be reset. Also, I keep a few new button batteries attached to the inside of my PC, just in case.
okay, so what if my pc has all fans running no rgb on them are turning on, my cpu aio has the fans spinning but the cyberpower logo isnt showing anymore and my gpu is working as normal but nothing will boot onto the screen and jo lights on mobo are displaying, very very confusing trouble shoot
only thing i can think of is the motherboard because i have no further way to test the ram etc but everything was running yesterday and today the system has given me these issues wont boot at all but power is being transfered through the system
I recently bought asrock b450m hdv 4.0 Mobo, kingston fury 8gb ddr4 ram,I m pairing it with ryzen 5600g, but the system is not POSTING and i can't see any display or the boot menu. I tried updating bios through instant flash, but failed. Kindly help
My TV says no display after Windows loads, Gigabyte splash screen appears, Windows loading animation spins, then as soon as it is done loading I get No Signal. Any help would be much appreciated. Thanks in advance.
someone please reply and help me, so i was using my pc watching youtube videos, and all of sudden my screen went black from no where, also did happen with me 2 days ago where my screen went green colour and white colour, and then my display wasn't showing from gpu, so i changed the video to motherboard and my pc is working, but my gpu fan is still spinning and it working fine, but still i dont get display, any help?
Same issue here brother. This thing has been plaguing my system for a while and it's the second time this has happed. I am going crazy trying to figure out the cause. The last time this happened a year ago and turned out both my mobo and GC were bad got the mobo replaced under warranty and bought a new GC now the swme issue again 😭😭
Yesterday my pc ok, i tried to format but wrongly changed boot disk from bios when u can actually just clik esc or f8 to change boot to pendrive, after that bios i restart pc and it wont connect anymore even i pull off the pendrive, cleaned my ram, removed cmos, remove gpu, removed 1 ssd, still nothing. i7 13 3060 32gb ram All light on Gpu fan spinning
can someone help i recently got a new 4060 ti gpu and i tried every troubleshoot known in this world except for bios update im afraid to update bios because i heard it will ruin ur motherboard
I have the same problem I clicked update and shutdown and it won't come back on. Pulled the cmos battery for a whole day and it still won't work. Lights fans all turn on but no screen and it's definitely not booting to my home screen
My keyboard, monitor and mouse dont turns on, but the pc do, when i took off the gpu the keyboard and the mouse turns on but my cpu cant show display, so i dont know if the problem is the power supply or the GPU, another thing is that the GPU have a white led so i guess there is the problem
Hi friends, I've been desperately experiencing the same issue, but my PC turns on, screen turns on too, but after a while it loses signal. Could you suggest where to look for the issue?
Love your video, just built a rig for my brother in law all parts were working fine out of the case and worked fine for 1 day while in the case, next morning after updating bios i got no post and white light, the said motherboard is old and I was planning on upgrading it anyway since I was already having problems with not having wifi after installing windows, something in the gpedit i dont have access too. i'm hoping a brand new b550 motherboard will help solve this issue!
My pc CPU led on but VGA,dram,or boot led not working and monitor keyboard mouse always off We check CMOS battery, professor ,ram clear,all pluck ok... What's doing now ?
None of this fixed my issue, but after a lot of time i may just have finally fixed it. The issue seems to have been the power supply air filter at the bottom of my case being clogged up with dust and somehow that may have been causing my power supply, that is at the bottom of my case and FAN FACE DOWN and had been intaking air through that dirty filter, to malfunction and cause the signal loss on the monitor. I just rolled over the power supply to fan face up to intake air from inside the case and havent had issues since. ALSO i remove the CMOS shorter from the cmos pins on the motherboard (The cmos shorter is a tiny tiny tool that is used on the cmos pins on the motherboard. Look online for more info)
i have a board msi X470 Gaming plus max, i recently bought a GTX 1070 amor Oc when i switch the pc on after 10-15 seconds the screen shows there's power because the no signal disappear but it stays black when i put back my 1060 it's working just fine Msi x470 Ryzen 5 1600 2x 8Gb ddr4 klevv 700w antec psu the 1070 is working on my friends pc with 650w psu also antec at this point i tried so many tricks I found on UA-cam but I never got to get the 1070 to display
Mine has video, I can get to the bios, but when the windows is supposed to start it just freezes there. Not a boot loop, not an infinity windows load, it just freezes.
I literally just had the same problem with a prebuilt HP OMEN. Shut it down and went to work came home tried to boot it up and it was freezing. I was lucky and had an extra 1660 GPU, a PSU, and a brand-new 8GB stick of RAM to swap out but no matter what I did still froze on the loading screen the circle would stop and stayed that way. Since I've never taken off my cooler let alone the CPU I thought, it had to be the motherboard. Bought a new MSI B550 MOBO and a Nvme SSD (thought the software could have been corrupt) swapped all my parts got into the BIOS, GREAT! Then went to install a fresh version of Windows and... it froze! Somehow my Ryzen 5 5600g decided to stop working between power cycles. Bought a new Ryzen 7 5800x and an AIO so $600 later I basically have a new PC. I guess on the bright side I have extra, known working, components now, and if I get a used 5000 series CPU I will have another working PC. Good luck with your PC I hope you are up and running soon.
Thanks for the video. I'm currently experiencing this issue. I moved my pc from basement to 2nd floor and now it spins+lights up but no display on monitor. I tried another monitor, gpu, other RAM and different slots. I'm at the point where it's either the cpu cooler, the cpu itself, or the motherboard pcie slot. I'm really regretting not taking the AIO and GPU out before moving it.
@@Morvellius yeah turned out to be the motherboard pcie slot. Luckily my gpu was fine and it was not too expensive a motherboard but still, unfortunate. I wish you the best lmk how it goes.
Hey buddy need your help My graphics card fans are running but No display when I plug my HDMI cable in GPU HDMI port, showing display only when I plug it in my motherboard’s port because my CPU has integrated Graphics…even sometimes showing no display in motherboard port too . And in display adapter option in device manager( show hidden device ) it’s showing me my graphics card with a yellow caution sign… what to do buddy ( sometimes Graphics card randomly start working for one or two days) Motherboard- MSI A 320m A pro max GPU- 1050ti CPU/APU - Ryzen 3 3200 G PSU - 550w ( cooler master)
i have a problem while im on my computer gaming and chilling and all of the sudden it just goes on no signal i still hear the sounds of the game and i can still talk and everything just the screen is on no signal i tried another cable first i had displayport now i have hdmi my pc is up to date with all the drivers and stuff so what can i do next its a new pc to specs is amd ryzen 5 and rtx 3060 twinx
Can someone plz help!!! Have a Msi tomahawk B450 gaming motherboard and is giving me 3 beeps, I replace the, motherboard, to a Msi B450 tomahawk Max 11, Rams, MSI a750 power supply, and processor which word for a bit and went back to shutting down & those 3 long beeps, took out the gfx card and it still beeps can someone help me????? PLEASE
I have this exact problem, but my computer will turn on after around boot 5 attempts. Every time I try to use my pc, the fans run but there is no display, but it turns on after multiple tries, but it deletes my bios settings almost every time, and I have to restart again if I try to open some select apps such as games or fl studio.
I just got a new 3060 ti and it worked at first but then I just got a black screen and it started making allot of noise so I turned it off and now I get no display but with my old 1050 ti it does work can someone help me?
so i have run into a problem with my PC where whenever my pc restarts or i shut it down and try to turn it on again my PC turns on but does not recognize that I have a monitor plugged in. If anyone could maybe give me ideas on why it would do that, it would be great. Ive checked the ram, gpu and power supply also have checked my ports and cables and nothing seems broken or dirty.
@@HealMyTech1 it makes noise from the hdmi port side where the grafic card is located and now my monitor says moniter going to sleep while the system is turned on it happens.in editng software and games but when i start my system it makes rhe noise
So my gpu my cpu and my psu its spinning. I have the green LED light on the mobo wich means it has power but the cpu fan spins at a lot of RPM and the gpu its spinning so hard but no display. What do you think it is?
I am aircraft mechanic. We do the same thin g for troubleshooting, use known working parts to swap out till you find the issue. Saves millions of dollars a year. Thanks for the video.
Yup, thats what we do!
Lol, fellow A&P here and I'm been busting on my brain on whatever has got my PC down
My pc fans are running and my pc is on butmy keyboard and mouse aren't lighting up or working nor is the signal on my monitor
Did you got any solution I am also facing same issue
i’m facing the same issue any solutions?
@@calixerastro motherboard and processor?
@@Sathish_vizag i5 13600k and gigabyte B660m
@@calixerastro did check motherboard any damage ?
These types of videos are less than worthless to the average consumer. The average person doesn’t just have a shelf full of spare parts to swap in and out. People who do have a shelf filled with parts already know how to do this. So who is this video for? Oh to have people who are having a problem click and get no help. Cool. What a joke the whole computer industry and tech UA-camrs are.
You don't have a friend who also plays on PC? That's what I do
@@ItsGamein like irl friends? No those are way too much work to maintain
He changed the motherboard with a new one and it worked, for those who are wondering and are frustrated with their gpu not working, saved you 14 mins!
thanks
but my motherboard is almost new🤣
Not all heroes wear capes.
@@sergiod1618 mine also was, I even grabbed my computer and the graphics card to the office where they assembled it for me. The card was fine on ALL of the other computers, and ALL other cards were fine on my own pc, after a couple of days, trials and errors I couldn't figure it out so I returned the card and thought to buy another one to test, but I haven't got the chance to yet..
@@fez5705 🫡😂
Figured mine that it was either the bios settings or the static. Fixed mine by removing the gpu, then the cmos battery to reset the settings for five-6 min, hold the power button for thirty sec to drain the static, and finally plugged everything back. GPU now displays.
IMPORTANT: (Make sure to have done the unplugging method above before proceeding) Also make sure to understand the BIOS configuration for the display. Sometimes, PCI-E (Display output for the GPU) gets interchanged with the iGPU (Display output for the integrated GPU of your CPU; most Intel CPUs have this) or the other way around. To check if that's the case, you can try plugging your monitor to the iGPU instead of the GPU or the other way around and check if it turns on. If it does, then there's a possibility that your BIOS is not properly configured to show display through your other display output. You can find it in most BIOS under 'Display Configuration' or the likes. Hope it helps!
This fixed mine thank you for sharing
it fixed mine to be thank you so much
Cannot believed that worked lmao. Thank you for bothering to comment this
@@naturalcauses1695 sure, glad to help!
@@blank4700 please bro can you explain i am having same problem how did you do that what do we have to do exactly first remove GPU and CMOS then hold power button for 30 second and then wait for 5-6 min and plug back that's it ? Or anything else pls reply
Hi guys one thing that you should check before doing any action is your motherboard cables connection, try to replug each cable at be sure that's well inserted, that was the issue that I faced pretty stupid 😫😫
Dam that actually worked 💀
I love yoy
yes, all cables, from ssds to other, its sily like that haha. Thats the fisrt test that everybody should do.
If the motherboard's the issue, then try removing the cmos battery for 15 minutes or using the screwdriver to touch the cmos pins for 15 seconds to short circuit it. What that will do is reset the cmos (BIOS). That helped when my PC wouldn't post cuz of me being an absolute dumbass for messing with the XMP profile.
Short circuit bios pins? Are you trolling?
@@khushisingh-sj8wi he’s not trolling, with the pc off and unplugged there’s two little pints that if you connect using a screwdriver it’ll reset the cmos
Hey man i have the issue in the video right after i got a new motherboard and i went into the bios to enable xmp and after that my pc stopped posting do you think the cmon reset will work?
@@waternaso what do I do?
@@FunnyKaden555find two pins somewhere on your motherboard it’ll have writing next to it called CLR_CMOS turn your psu off and get a screwdriver and place it in the middle of the pins and wait for 15 seconds turn pc on and your cmos will be cleared
I actually switched my hdmi cable to the older cable and it worked. It was all about the bios system settings. It was not setup to detect pci-e or hdmi on the motherboard. Just the standard regular old vga cable fixed the problem for me
Same here. After a cpu upgrade, the PC turned on fine, but after some "cable management" in my ancient pc case (during which i did reset the BIOS), i couldn't get any display, even tho every part seemed to work as it should. Eventually (i'm not sure if i read it somewhere in a comment or if it was sheer desperation) i swapped the HDMI cable and plugged the GPU via the VGA one and BOOM, pc booted no problem.
@@sunseth1384 yeah i hate this problem, this evening i spent hours fiddling in front of a bit impatient people who's probably knew better than me, i knew there's something wrong with the motherboard or the bios but wtf can i do when resetting bios didn't work and nothing is broke? but out of all thing, changing display cable fixed the thing.
i probably didnt really clear the cmos or something, shit is weird, sometime restarting it about a dozen time will solve itself like nothing happened.
Oh man! Thank you thousand times!!!
I switched my dp cable to hdmi and it worked!
My pc boots up I can see the asrock logo after a few seconds The display goes off, the computer is working fine,the keyboard mouse too,after I disconnect and connect the VGA cable,the display shows up,sign in(windows),I think it's a cable or monitor issue,what else could be the issue?
I suspected the board to be the culprit in facebook simply by knowing that the chipset was a b450 type, but I didn't actually think that it would be faulty though. One thing is for sure there would of been no other way to know for sure, without swapping it.
So, you've changed the motherboard or you managed somehow to fix it?
If it still not showing anything try pressing (windows icon+ctrl+shift+b) while the pc is still running
Then turn it off by pressing the button
Turn it on
It's gonna ask you for boot by pressing f1 (don't boot anything) press shift+alt+delete
It helped me when nothing else did (I seriously tried everything) gl
Sumwhere in the comments sum1 mentioned it was the screw on the cpu fan that was tightened too tight, cant find the comment bt to THAT GUY... THANK YOU... you changed everything for me... fixed my problem. Had two problems...
1.
Took entire pc apart until it was just power supply and motherboard (cpu and fan/heatsink still connected) and turned it on, still orange light then I read your comment and loosened the screws a little and hit power button... BOOTS TO GREEN LIGHT.
2.
I then inserted all four ram cards and again got the orange light so I insert and start test each ram slot one by one, it was the second ram card so I swapped second and forth card around and started up, SHE PURRS BEAUTIFULLY.
It also cud be the bios hard resetI did bt for me... loosening the cpu cooling mount/fan was where everything changed, got a different result from all the tests I did. So thank u for channels like this and people who comment. The vid may not solve your problem bt a comment might. Keep it up guys.
Hi, i bought a new GPU BUT no booting and only 1 beep every few sec and i really think the Graphics card not detected by the BIOS (already updated) or motherboard (vostro260) !
any tips ?
I need help! I’m finished my first PC build and the test outside the case went well, the bios showed up on my motherboard and it was dandy! BUT now that it’s inside the case and everything is still running, I plug in my DP cable into the GPU and into the monitor but now the monitor says it’s receiving NO signal from the DP cable. I’ve got no idea what’s wrong
Yo i have the same issue right now , since you commented 1 month ago im guessing you solved the problem can you please tell me how
@@hamadkd7017 just finished my first build, after 5 hours still same problem as you
And how you fixed this guys
@@hamadkd7017 Hey! The issue fixed itself. Idk how, but after 18+ hours it started working. That’s not useful but I’d say leave the plugs in and come back to it. Hope everything works out
@@omnipotentlennythat's kinda crazy and hopeless
The easiest way I did was to check the beep sound when I unplugged all the RAM. Without RAM there would be long beep:
1. If the beep does not exist (you must make sure the speaker buzzer system of motherboard is fine, some motherboard failed to beep at all or your buzzer is broken/reversed) then it must be either the processor or the logic/Super IO motherboard (which is hardest) and after changing the processor to known working & compatible one still does not sound beep then it is clearly the motherboard issue which require advanced electronic test such as MOSFET and voltage output.
2. But if there is a long beep then most likely just VGA (Graphics Card) or RAM issue. Some motherboards (not all) will generate unique sound if the VGA is failed. Try using onboard or switch to another VGA. If the problem persist try replugging RAM to different slot or change the RAM to known good one (borrow one if you don't have).
If you are a technician usually you have something like "PCI Tester PC Analyzer Diagnostic Card" to show the current code that the motherboard is currently stuck at.
PS: I'm a PC technician for 8 years.
Hi, I have two motherboards that stopped working on the same day, It's a little weird. One gives one long beep and the other one long and 2 short. Is it possible that the power supply killed both? The power supply is otherwise not used.
Mine stopped showing images after stopping an overclock. I got the Alienware r10. The OC is the system preset so youd assume its safe. Literally tested overclock to see the difference. To go back to normal clock it did a restart aaaaaaand no signal. Resat the ram and gpu. Monitors work fine and the pc boots except it runs the rgb like for 5 seconds, goes black, repeats. Doesnt sound any beeps for system errors... Im confused af.
First things first to ever try when you get this problem is to unplug the powercable, then remove the battery on the motherboard becuase many MANY modern motherboards get fucked up then move around the PC and somehow the motherboard loses its "memory" or something.. 19 of 20 times its its so simple atleast.. cheers!
My pc was working fine till recently. It was working on 2 X 8gb ram. Now it only boots on 1x 8 GB ram with no issues on any of the 4 slots and boots silently. When I boot with 2 X 8 GB ram, there is a noisy fan sound and no display and after a few seconds, the pc goes into a boot up loop. I've test both rams individually in all slot and they work. I've even swapped out the CMOS battery. Please help can't figure it out
one of your ram is faulty. you need to run memtest individually to see which one is faulty
Test o ln tlother slots
Thank you for spending 5 mins talking about the specs of that PC... So useful.. it's almost like I searched "how to hear random shit that has nothing to do with what I'm looking for"
Lmaoooo
I immediately responded with “I don’t got time for that shit that’s not why I’m here”
Hi there i have watch some of your videos on PC repairs, especially the one that says PC turn on LED light on, fan spinning but no display on monitor. Please i have the same problem on my computer and also there is a steady white light on the motherboard around the that says VGA debug something i can really remember. Is there any way you could help me. Please.
i have the same problem, with the difference that one out of every 20 times, or so, that i turn on the pc i can acces the bios. can you please tell me if you were able to fix it, and if you could, what did you do?? at this point i dont know what to do, please 🙇♂
Hi there, no the PC is still not fix, actually when you turn on the computer, everything seems to be working normally, the fans are spinning, led lights are on, but there is no display on screen, and also mouse and keyboard are not responding, then i notice there is steady white light on the motherboard where it's written CPU. Is there any way you could help
@@chebonaventure6382 i’m having the same problem literally did you ever find a solution?!!?
@@chebonaventure6382 hi bro, did u fix ur problem ? Because I'm having the same issue here, can u please help me?
my problem is that i changed some settings in the bios and when i left bios it was just black screen. I turned the pc off and back on and it did the loud thing that it always does when it boots on but it did it infinitely PLEASE HELP!!!!
fixed it! :) i just reset the bios
@@ho_rth I did that to but my bios won't reset
@@carsonschnell1181 what do you mean? did you take the battery out of the bios and wait for like a minute or few?
@@ho_rth ya
@@carsonschnell1181 oh.. sorry idk how to help you maybe something else is wrong? i am not good at this either
true . having parts is key for making PC diagnosis
Change new ram, still not working.
Change power supply, still not working,
Reset CMOS, still not working.
New Motherboard, still not working..
How about CPU ?
If CPU problem, you still can boot ?
it won’t boot in most cases
Graphic card
I had this happen to mine when first built. It was running off the i-gpu which had no drivers.
That's not exactly the same issue then...!
@@HealMyTech1 actually its the exact same problem. no display showing and all lights powered on. My worst fear was I fried the mobo but no, that's not what happened.
How did you fix it???
How did you fix your I-GPU problem?
Pc was working fine, once I put in the 3700x on a b450 board. No display unfortunately, I updated the bios before installing the new cpu
Did you ever fix it?
I need help , when my uncle transferred my ram to the new pc to test out if the new one ram is faulty. Then when he put it back on my pc , my pc doesn't display anymore even tho the system is powered on. The cpu ez debug light is blinking white light in few secs in startup then a hold white light after those seconds , we tried cleaning the ram and the ram slot , put in diff slot , and still doesn't work. So we tried resetting the bios , check the cpu if it has bend pin , the cpu is ok but still not working.. Sorry if my english grammar is bad.
I have this same issue right now, did u find a fix?
my pc turns on but the led lights don’t work and the screen is straight black but the ram i’m trying to install is brand new i’ve tried everything from all types of videos and comments and nothing is working
you ever fix it mine just like this
@@xaysfiles same man If anyone knows anything please help
@@junetheartist_ had too replace my cpu
@@xaysfiles I’m taking it in for repair tomorow - they said it’s a power supply issue so hopefully that solves it all - is yours all good now yeah?
Hey guys if anyone sees this! Just put the usb stick in it with windows and it probably will work. It worked for me!
Did You have no signal at all?
@pierdolek1236 troubling shooting mine this Monday I'll get with you on if this worked. I have the issue where everything turns except my gpu I have changed the board and kept everything else the same and everything booted up but I still want to fix my board since i had to use a friend's to figure that much out. Clearing the cmos definitely did something tho because at first mine didn't even have the cpu fan spinning
Also going try flashing the bois to see if that will get it to work but also my mobo isn't giving power to the keyboard and mouse
Did you try to clear cmos before you just told the guy he needed a new motherboard
Please help me, I assembled a brand new pc, it powers up motherboard light is on, keyboard light is on, mouse light is on. But no display. I've visited quite a few shops but everyone said GPU is faulty. I tested my GPU on my old dual core pc and it's working. Now everyone is saying the motherboard is faulty. Ive done most of the troubleshooting, power supply is working. I'm really confused if its the motherboard or cpu or just maybe I should hardreset the bios setting and try. I was unable to find any guide on how to reset my motherboard. My parts are: i3 10100f, MSI H410m-a pro, 16gb RAM ballistix, GTX 1030 DDR5. Antec B550 power supply
Did you figure it out I have the same problem
@@jimmyhung3927 it was the hard drive
@@harrysahota_ How did you fix it?
@@Tetrok_the_Teal replaced the Hard Drive
@@harrysahota_ lol makes sense, Ive got my boot files on the one thought about replacing, but I think mines actually a motherboard issue :P
Good videos, have troubleshot multiple computers and your process is spot on what I do as well. Great work, great information.
The issue with my motherboard is that mine has a button labelled as CLR_CMOS2 instead which seems unique from other mobos, i havent seem this with other motherboards. (MSI X470 Gaming Plus). What i did was just shut down the computer and unplug the power cord that connects to your computer and flip the switch, once thats done. I pressed down on CLR_CMOS2 for 15 seconds or so and let go and plugged back everything and it worked.
Update: I had the same issue again, i had it two more times and fixed it the same way i explain above. Its kind of annoying and im concerned about what's wrong. Can you suggest akhi pls what the issue might be?
Hey my man I hope you got your problem fixed. But for everyone reading your comment from now on let me say that if you're facing this issue frequently and you're solving it frequently by resetting cmos, you should replace the battery.
Dude i wanna thank you. That eraser move worked amazingly with my computer. Its showed no signal and i did as you said. And now my pc is up and running thx for your help
Hi, hope you are doing well.
I got the same issue with my Dell Inspiron (i7 4790 processor). It was installed in an i3 casing previously. I bought the Gamdias Athena E1 Elite ATX Micro Tower Gaming Case (1 ARGB Fan) (1 Black Fan). And my PC was working fine but when I swapped it to new case, my PC stopped giving the display.
My PC bios got corrupted by swapping. So the technician did new bios but it still didn't gave display.
I took my PC to a new technician and he just plugged out the power button with the wires from the previous casing and shoved it in the new casing and my issue got solved. Now my PC has duel power bottons. Turns out that the jumpers and the system security from the previous casing were the only way to make my PC function again.
that´s weird
@@dexzero I know and later my motherboard died...
Do a video if the GPU fans are spinning really fast but there is no display signal, thats my current issue right now, I really hope you could fix it.
Have u put the pcie cable on your gpu?
@@pitkassim7006 I have...could that be the problem?
@@heyitsleyy if its not working, u need to troubleshoot it
1. U can try insert your gpu in other pc and try turn it on, if the display show up as usual, that gpu should be no problem
2. If u dont have other pc, try integrated graphic on your mobo, if the integrated graphic shows display, your gpu or gpu slow might have some problem
3. If u already try your integrated graphic and still no display, try change your display such as your tv, if your tv show up display, then your monitor might be problem, u need to try both integrated and gpu, to more comfirm, u try using ur pc on other monitor.
Point no 2, gpu slot, not gpu slow
@@pitkassim7006 same issue my pc turns on when i put hdmi in motherboard bt doesn't detect GPU bt gpu fan is spinning wht shud i do
Hey I don;t know if you'll reply but I have a laptop, it once froze and when I restarted the screen was lit but black, wen to safe mode after reseting, newly installing windows everything I found out if I remove display drivers it works but with amd ryzen display drivers it doesn't work but without the driver I can't change screen brigthness and it always stays high and many things don't work properly. What's causing it? I've paid 2 repair shop and they just reset driver and stuff same as me and the issue continues I've been just wasting money but no fix.
I had a CPU issue a few days ago. Same thing as in the video. RGB and fans turned on but no display. Thing is my GPU RGB wouldn't turn on which made me doubt if it was the CPU or the motherboard. A blue electric spark appeared in my pc before it happened, so anything was possible. So I just went to a pc store and got a compatible motherboard and CPU and I explained my issue and that I needed to do some testing. They told me I could return the hardware if it was in perfect state. I was still under warranty for my own components, but I didn't want to wait. That's how I did it if you don't have component, albeit a expensive solution. But you do get your money back in the end. Found out it was the CPU and returned the motherboard. Now I sent my old CPU for repair, but I still kept the new CPU. (Secretly did a slight cpu upgrade too, because it was actually a bottleneck anyway) So I got my money back for the motherboard and now I'm waiting for a replacement for my old CPU and will sell it after.
Cpu 99% of time cannot be repaired unless an smd capacitor was shorted or pins was broken
I have this exact same issue with my new build but don't have spare parts to test, ryzen 7 3800x with bf450 board, swapped ram, took mb battery out and put back in, motherboard and gpu light up and all fans spinning, just won't post, do you think it's the new motherboard? It seems exactly the same as this
Oh I also plugged a speaker into motherboard and I get no beeps at all when turning on, also the build won't shut down when I long press the power button, I have to switch off by psu power button
did u find the solution today ?
@@djsyks1 fixed ? Help
@@Exo1c.armaan ended up sending mb back and buying a different one, worked straight away with new board, maybe the board I sent back needed the bios updating, I'm not sure but was defo the motherboard, maybe try updating the bios as that's the only thing I didn't try
@@djsyks1 🤣 i tried but didn't work ☹️ I use boot drive you can update bios with it without display
My PC has a red and orange light when I turn it on and not display. The lights go away after like 5-10 minutes and the display turns on. Everything works fine once there is a display but obviously it's not supposed to be like that.
What was broken in the motherboard?
hello, i have a brand new the x670 aorus MOBO, and it has no video, what do you recommend ?
I have the same problem, but in my case B550M and also not a single usb port is working.
Am I going to have to buy a new motherboard?
I am very suspicious it's my motherboard causing the issue. It had been repaired once for the same issue. But now, I decided to buy a new motherboard. I'm done dealing with shit. Good video by the way.
I have a Lenovo laptop which switches on, when the screen lights up it has the Lenovo logo with preparing automatic repair. Then another screen appears headed choose an option. The only one that takes me forward leads to another screen: Automatic repair. However, this like the rest leads back to the first screen: preparing automatic repair!
What can I do?
If my computer going to post after turning off my psu, and when I restart it didn’t go to post- failure is my psu? So when I switch psu my computer have going to post after 4 save+reset in bios, on fifth restart it didn’t go to post.
Today I replaced the pads on my MB and GPU heatsinks, but had forgotten to plug the CPU cable in after reassembly. I panicked after getting no image and thought I had short circuited my graphics card. So I found the cable while watching your video, and now my PC works again lol!
What if my system posts even after trying hard to get this motherboard to post and then after some time it crashes in windows 50-50 chances to crash?
CPU- Core i3 6100
MB - GA-H110M-s2
SSD- Kingston A400
Ram - Kingston 4gb DDR4 2400, Hyperx 8gb DDR4 2400
GPU - Hd 7870
Psu - CM MWE550 Bronze
Motherboard was not powering on earlier, light and fans used to turn up for a sec and nothing after one spin. After some time it was spinning continuously like no power to cpu but never post. And after some ram adjustment and replacing rams it did post and now I'm facing crashes and sometimes the same no post but posts after turning on in sometime
I recently build a new PC and was getting the boot and display lights, the graphics card was connected via display port and Dvi and still no image. I was getting desperate só I finally plugged a hdmi cable and it finally worked, I don't know if it is a driver issue but I still can't acess the Bios screen if I have the monitor connected using Display port, I tried to update the Nvidia driver to display port 1.4 but get an error evertytime.
What if the MB is so faulty it blows your test cpu or other test parts as it did in the original PC ? For instance when the power on the MB is shorted or something ?
pc on , fans spin no keyboard light or mouse cpu light on motherboard trouble shooted the motherboard and ram could it be not enough thermal paste?
when my pc is on some times it randomly black screens and restarts is there a way to figure out what part this is
Probably the PSU
I tried to overclock my RAM. My Omen 30L powered off. Then it powered on and I heard 3 beeps. It powered off then on again followed by 3 beeps.
The system is in but I don't see anything on my screen. How do I fix please?
that board shouldve never been paired with that cpu without active cooling on the VRMs or after market heatsinks applied those VRMs cant handle the core count and power load without overheating. He'll just have the same problem as before. Buy a bunch of old or defective boards for their heatsinks theyre usually the exact same hole spacing
i have an orange light when i turn my pc on, but i can use the pc properly and display shows, am i going to have any problems later if i continue using my pc with an orange light on in motherboard ?
I tried to add more speackers via SPKR connecter but after 3 tries the sound faded I think I broke the ac any tips??
Greetings,my problem is that my pc boots but I get vga light and 3 beeps,any idea?
Msi mpg b550 motherboard
Thermaltake 630watt psu
2 rams hyper x 16gb
Gtx 3070 gpu (I Also checked with another)
M2 Samsung ssd
I have this problem but im not really sure if its the same. Heres the issue:
Problem: No display but with power just like yours.
Issue #1: Gpu(connected) = No display with power and fan is spinning but keyboard and mouse not turning on
Issue #2: Gpu(disconnected) = No display with power and fan is spinning but keyboard and mouse will turn on and I can see the light of capslock led and numlock led.
My question is what would be the cause of this problem? Is my mobo good because it shows that if my gpu is not connected my keyboard and mouse will turned on? Or my psu is bad and doesnt give enough wattage?
Also I dont have iGpu. Im using ryzen5 2600 so I cannot tell if my pc is booting up to bios when the kboard/mouse is turning on.
My gpu is good tho because the Tech tested it and I saw it myself.
I installed a new gpu and the pc wont boot up I unplug the power from that gpu and it turns on any idea would a low wattage power supply cause this? Or could the gpu be dead?
I just have this problem ..i just get a3070before just use intel.uhd770 (13700k) .
After installing to the mobo it turns on normaly.. but after i install the driver ..and start gaming it suddenly off and no boot no screen at all.
So i switch back to my uhd 770 intel at the moment is works just fine.
Is this because of my PSU not meet the req ?
I have Antec 700watt 80+ Bronze.
I need help thank you verymuch.
Thanks.
My pc boots up I can see the asrock logo after a few seconds The display goes off, the computer is working fine,the keyboard mouse too,after I disconnect and connect the VGA cable,the display shows up,sign in(windows),I think it's a cable or monitor issue,what else could be the issue
I'm worried because I just build a new pc and 1 month using I got a black screen 2 days ago and can't solve it. The pc turns on but I can't enter in bios. Motherboard is b450m gigabyte and gpu is rx 6750xt. I hope the issue is not my graphic card.
I have a Acer Aspire f5 572g 57pv laptop and after trying to overclock my laptop and hitting f10 in bios to save and exit, my laptop got stuck in a black screen every single time I try to boot it, no logo, no bios no nothing, just a black screen, I have tried to cmos reset by removing the bios battery, I tried it 3 times, longest time I waitted before putting it back in was 1 and half an hour, I don't know if this is because I have a bios password (yes ik the password I just need to enter bios to reset it but there is no display), I tried looking for cmos jumper but couldn't find it, please help 😦
Love that you film the process god bless you
I'm having the same issue. Everything turns and spins, but no signal. I swapped my GPU into the lesser PCIE slot which is 2.0 and it works. I think I fucked up my PCIE 3.0 slot, but i''m still testing
One of the most common problems is a dead/or dying CMOS battery. When I have any POST problems, I insert a new battery. If the battery has gone SOUTH, you might see a message informing you that the system clock needs to be reset. Also, I keep a few new button batteries attached to the inside of my PC, just in case.
okay, so what if my pc has all fans running no rgb on them are turning on, my cpu aio has the fans spinning but the cyberpower logo isnt showing anymore and my gpu is working as normal but nothing will boot onto the screen and jo lights on mobo are displaying, very very confusing trouble shoot
only thing i can think of is the motherboard because i have no further way to test the ram etc but everything was running yesterday and today the system has given me these issues wont boot at all but power is being transfered through the system
Am I out of luck if I don’t have spare working pc parts
I recently bought asrock b450m hdv 4.0 Mobo, kingston fury 8gb ddr4 ram,I m pairing it with ryzen 5600g, but the system is not POSTING and i can't see any display or the boot menu. I tried updating bios through instant flash, but failed. Kindly help
My TV says no display after Windows loads, Gigabyte splash screen appears, Windows loading animation spins, then as soon as it is done loading I get No Signal.
Any help would be much appreciated.
Thanks in advance.
someone please reply and help me, so i was using my pc watching youtube videos, and all of sudden my screen went black from no where, also did happen with me 2 days ago where my screen went green colour and white colour, and then my display wasn't showing from gpu, so i changed the video to motherboard and my pc is working, but my gpu fan is still spinning and it working fine, but still i dont get display, any help?
Same issue here brother. This thing has been plaguing my system for a while and it's the second time this has happed. I am going crazy trying to figure out the cause. The last time this happened a year ago and turned out both my mobo and GC were bad got the mobo replaced under warranty and bought a new GC now the swme issue again 😭😭
@@Metalhorse_ did you ever figure it out?
I have the same problem😰please let me know if you know how to fix it
but why would the motherboard go from working to not working because of the swap? I assume the dude was careful and didn't break anything.
Yesterday my pc ok, i tried to format but wrongly changed boot disk from bios when u can actually just clik esc or f8 to change boot to pendrive, after that bios i restart pc and it wont connect anymore even i pull off the pendrive, cleaned my ram, removed cmos, remove gpu, removed 1 ssd, still nothing.
i7 13
3060
32gb ram
All light on
Gpu fan spinning
can someone help
i recently got a new 4060 ti gpu
and i tried every troubleshoot known in this world except for bios update
im afraid to update bios because i heard it will ruin ur motherboard
Anyone help I accidenly turned my pc off when it was updating and my pc turns on but no display on my monitor and no USB ports or hdmi are working
I have the same problem I clicked update and shutdown and it won't come back on. Pulled the cmos battery for a whole day and it still won't work. Lights fans all turn on but no screen and it's definitely not booting to my home screen
@@nazzato91 did you fix the problem?
@@schaefer8704 yes the motherboard was bricked
@@schaefer8704 apparently during that process it bricked. Maybe bios maybe a power issue. Not sure. Replaced it and been fine since.
My keyboard, monitor and mouse dont turns on, but the pc do, when i took off the gpu the keyboard and the mouse turns on but my cpu cant show display, so i dont know if the problem is the power supply or the GPU, another thing is that the GPU have a white led so i guess there is the problem
Just had this problem after clicking update and shut down with windows 11. Turns on no display please help.
I have the problem that the gpu fans starts to spin fast and the display turns of while I am playing games
Hi friends, I've been desperately experiencing the same issue, but my PC turns on, screen turns on too, but after a while it loses signal. Could you suggest where to look for the issue?
Possibly overheating of your GPU... try using the onboard graphics.
Love your video, just built a rig for my brother in law all parts were working fine out of the case and worked fine for 1 day while in the case, next morning after updating bios i got no post and white light, the said motherboard is old and I was planning on upgrading it anyway since I was already having problems with not having wifi after installing windows, something in the gpedit i dont have access too. i'm hoping a brand new b550 motherboard will help solve this issue!
Same problem tried new ram new psu ... No mobo and cpu available here 8th generation intel :(
Guys turns out my motherboard went bad and no where to find the 8th generation board it sucks
Bro im facing the same problem after im swap a gpu.. so im have change old gpu and put new mobo and psu but still the same
My pc CPU led on but VGA,dram,or boot led not working and monitor keyboard mouse always off
We check CMOS battery, professor ,ram clear,all pluck ok...
What's doing now ?
None of this fixed my issue, but after a lot of time i may just have finally fixed it. The issue seems to have been the power supply air filter at the bottom of my case being clogged up with dust and somehow that may have been causing my power supply, that is at the bottom of my case and FAN FACE DOWN and had been intaking air through that dirty filter, to malfunction and cause the signal loss on the monitor. I just rolled over the power supply to fan face up to intake air from inside the case and havent had issues since. ALSO i remove the CMOS shorter from the cmos pins on the motherboard (The cmos shorter is a tiny tiny tool that is used on the cmos pins on the motherboard. Look online for more info)
No cursor on my screen , it’s pitch black, it says auto adjustment in progress and it doesn’t show nothing else
i have a board msi X470 Gaming plus max, i recently bought a GTX 1070 amor Oc when i switch the pc on after 10-15 seconds the screen shows there's power because the no signal disappear but it stays black when i put back my 1060 it's working just fine
Msi x470
Ryzen 5 1600
2x 8Gb ddr4 klevv
700w antec psu
the 1070 is working on my friends pc with 650w psu also antec
at this point i tried so many tricks I found on UA-cam but I never got to get the 1070 to display
Mine has video, I can get to the bios, but when the windows is supposed to start it just freezes there. Not a boot loop, not an infinity windows load, it just freezes.
I literally just had the same problem with a prebuilt HP OMEN. Shut it down and went to work came home tried to boot it up and it was freezing. I was lucky and had an extra 1660 GPU, a PSU, and a brand-new 8GB stick of RAM to swap out but no matter what I did still froze on the loading screen the circle would stop and stayed that way. Since I've never taken off my cooler let alone the CPU I thought, it had to be the motherboard. Bought a new MSI B550 MOBO and a Nvme SSD (thought the software could have been corrupt) swapped all my parts got into the BIOS, GREAT! Then went to install a fresh version of Windows and... it froze! Somehow my Ryzen 5 5600g decided to stop working between power cycles. Bought a new Ryzen 7 5800x and an AIO so $600 later I basically have a new PC. I guess on the bright side I have extra, known working, components now, and if I get a used 5000 series CPU I will have another working PC. Good luck with your PC I hope you are up and running soon.
Thanks for the video. I'm currently experiencing this issue. I moved my pc from basement to 2nd floor and now it spins+lights up but no display on monitor. I tried another monitor, gpu, other RAM and different slots. I'm at the point where it's either the cpu cooler, the cpu itself, or the motherboard pcie slot. I'm really regretting not taking the AIO and GPU out before moving it.
Did you end up fixing this issue? Having the same issue after moving.
@@Morvellius yeah turned out to be the motherboard pcie slot. Luckily my gpu was fine and it was not too expensive a motherboard but still, unfortunate. I wish you the best lmk how it goes.
Hey buddy need your help
My graphics card fans are running but No display when I plug my HDMI cable in GPU HDMI port, showing display only when I plug it in my motherboard’s port because my CPU has integrated Graphics…even sometimes showing no display in motherboard port too .
And in display adapter option in device manager( show hidden device ) it’s showing me my graphics card with a yellow caution sign… what to do buddy
( sometimes Graphics card randomly start working for one or two days)
Motherboard- MSI A 320m A pro max
GPU- 1050ti
CPU/APU - Ryzen 3 3200 G
PSU - 550w ( cooler master)
Turn off ur igpu , maybe its conflict with ur discreet gpu
i have a problem while im on my computer gaming and chilling and all of the sudden it just goes on no signal i still hear the sounds of the game and i can still talk and everything just the screen is on no signal i tried another cable first i had displayport now i have hdmi my pc is up to date with all the drivers and stuff so what can i do next its a new pc to specs is amd ryzen 5 and rtx 3060 twinx
Is the problem fixed?
@@abhilashdethroy5389 nope….
Can someone plz help!!! Have a Msi tomahawk B450 gaming motherboard and is giving me 3 beeps, I replace the, motherboard, to a Msi B450 tomahawk Max 11, Rams, MSI a750 power supply, and processor which word for a bit and went back to shutting down & those 3 long beeps, took out the gfx card and it still beeps can someone help me????? PLEASE
I have this exact problem, but my computer will turn on after around boot 5 attempts. Every time I try to use my pc, the fans run but there is no display, but it turns on after multiple tries, but it deletes my bios settings almost every time, and I have to restart again if I try to open some select apps such as games or fl studio.
It’s ur interface
@@prodgroovyCHU elaborate?
I just got a new 3060 ti and it worked at first but then I just got a black screen and it started making allot of noise so I turned it off and now I get no display but with my old 1050 ti it does work can someone help me?
so i have run into a problem with my PC where whenever my pc restarts or i shut it down and try to turn it on again my PC turns on but does not recognize that I have a monitor plugged in. If anyone could maybe give me ideas on why it would do that, it would be great. Ive checked the ram, gpu and power supply also have checked my ports and cables and nothing seems broken or dirty.
Redux build? I’m having the same issue. Did you figure it out
@@push-to-talkpodcast2864 i have the same issue bro and i bought it from redux gaming as well!
Hellow i have that same issue but i replace my gpu and its open but wont turn off
Hi i needed an help when ever i start a game on my pc start's makeing weird noises i think it's coming from the hdmi port can you please help
Not enough info, You need to start troubleshooting. Have you checked out my troubleshoot series?
@@HealMyTech1 it makes noise from the hdmi port side where the grafic card is located and now my monitor says moniter going to sleep while the system is turned on it happens.in editng software and games but when i start my system it makes rhe noise
So my gpu my cpu and my psu its spinning. I have the green LED light on the mobo wich means it has power but the cpu fan spins at a lot of RPM and the gpu its spinning so hard but no display. What do you think it is?
Yeah i got the same, it's either a MB or PSU problem. Possibly a CPU problem but idk really, Im inclined to believe its the MB rn
What was the fix?
Mine is the same, but it restarts and goes back on again (It does this all the time) Its annoying cuz i lose a lot of work. Any Fix???
I got 2 Asus B450 boards, one is the m-k and the other is the pro . No Video , video error signal. The pro was fixed by BIOS update, but the m-k not.
I just also check the processor then it works after since I already did the other solution, this really helps. Thank you
Thank you, I found your videos extremely helpful during my pc build.