Fast Setting Joint Compound Tips Your Drywaller Doesn't Know
Вставка
- Опубліковано 9 лют 2025
- I'm going to give you about 17 tips and tricks to do with Fast Setting drywall Joint Compound, or Hot Mud, and I bet most drywallers don't know all of them, & will pick up a tip or 2.
☑️ My Drywall Academy is going LIVE & I'm GIVING AWAY SOME OF MY eBOOKS on my NEW Drywall Academy Course page. Just sign up at: guy-s-site-060... For an Instant Download.
Or if you are serious about learning drywall, pick up my paid expanded version at: geni.us/Drywal...
⭐ MY DRYWALL TRAINING BOOKS FOR SALE ⭐
🟢 Do you find Drywall Tools and Materials Confusing? Pick up my new Book, "Understanding Drywall Tools & Materials" and I'll show you what you need, and what you don't, along with what each item is used for. at: geni.us/Drywal...
🟢 Learn tips & tricks for spraying Knock Down Texture- geni.us/knockd...
🟢 Guide to Drywall Sandpaper, what to use, when etc- geni.us/Sandin...
🟢 And you'll find even MORE ebooks and guides in my store.
☑️ DRYWALL ACADEMY- Sign up for our email list to be notified of future Drywall Courses you can take, AND we'll send you a discount offer each time we release a new course. WWW.DrywallAcademy.com
☑️ WEBSITE INFO -You can find a lot of bonus information on our website at: www.thatkiltedg...
🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒
- - - - - (we earn 3-5% on these sales, thank you) - - - - - -
☑️ TapeBuddy Tools
🟢 Mixit Paddle - geni.us/MixitP...
🟢 TapeBuddy simple taping tool - amzn.to/3KN9tVY
🟢 TapeBuddy Taper, mixer and bucket scoop- amzn.to/38UdUkm
☑️ LEVEL5 Drywall TOOLS (Financing Available)
Click the Links below to see the current sale prices
🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBo...
🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6
🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH
🟢 A good all around Mud pan and knife set- geni.us/ize6U
🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx
🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj
🟢 For a Hawk & Trowel Set- geni.us/urlJsH
☑️ Miscellaneous Drywall Tools
🟢 Mesh Tape dispenser (optional) - geni.us/Meshta...
🟢 Radius drywall Sander, great for beginners or pros alike- geni.us/Radius...
🟢 Affordable Texture sprayer hopper that I USE - geni.us/Hopper
🟢 The BEST Knockdown Knife - geni.us/KDKnife
🟢 Rubber Skimming blade mentioned in other videos -geni.us/rubber...
🟢 Wen Vacuum Drywall Sander (Good one for a low price) - geni.us/Wensan...
🟢 The Dewalt Mud Mixing Drill I use (super tough) geni.us/Dewalt...
🟢 For our full drywall tools store- www.amazon.com...
☑️ Miscellaneous Tools
🟢 The BEST Stud Finder I've Ever used- geni.us/Frankl...
🟢 A nice hard case for the stud finder - geni.us/Frankl...
🟢 The best paint extension pole 2-4' (for the sander above too)- geni.us/extens...
🟢 A quiet compressor for the texture hopper- geni.us/mycomp...
☑️ Miscellaneous supplies
🟢 Guardz torn paper sealer. Stops Torn Brown Paper from bubbling - geni.us/Gardz
🟢 Drywall Mesh tape - geni.us/Meshtap
☑️ My Camera Gear
🟢 Sony A6400 Camera. (I have 3 they are so good)- geni.us/SonyA6...
🟢 My Wireless Lav mics, AWESOME mics- geni.us/1wVNfJy
🟢 GoPro Hero 9 - geni.us/ocAa
⭐⭐ ⭐ Please Visit my sponsors below, they help me afford to put out these videos ⭐⭐⭐
☑️ DO YOU VALUE YOUR INTERNET PRIVACY? I do. You can surf anonomously with Surfshark- geni.us/getsur...
☑️ Need Solar Panels & Gear? Save up to 90% - geni.us/Santan... (I bought a whole pallet from them and love them)
#ThatKiltedGuy #Drywalltips #DrywallRepairs #drywallschool #howtorepairdrywall
DISCLAIMER : That Kilted Guy Video Productions LLC, cannot guarantee against improper use or unauthorized modifications of this information. We assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result, or any obligation for future assistance. Watching the video does not form a professional relationship or constitute receiving professional advice.
Tool links below. ☑ Attention all Drywall enthusiasts! Introducing the Drywall Academy, your ultimate online destination for mastering the art of Drywall. Whether you're a complete beginner or a seasoned professional, our comprehensive courses cater to all skill levels.
At The Drywall Academy (drywallacademy.com), we believe that knowledge is the key to success. That's why we are meticulously curating a vast collection of courses, featuring hundreds of lessons, covering everything from the fundamentals to advanced Drywall business building skills, texture application, texture matching, and much more.
Founded by Guy Purcella (That Kilted Guy on UA-cam) with 40 years of experience. With our easy-to-follow text and video lessons and practical demonstrations, you'll gain the confidence and expertise needed to tackle any Drywall project with ease, less frustration and a better quality job.
Don't miss out on this golden opportunity to level up your Drywall skills. Join the Drywall Academy today and unlock your true potential in the world of Drywall. Visit drywallacademy.com now and embark on a journey towards mastery! 🚀
And if you are confused about which drywall tools and materials you need, pick up my Drywall
Tools and Materials book on Amazon at: amzn.to/3T4eEZg
Or for a signed or Spiral bound version visit www.ThatKiltedGuyStore.com
Watch this Playlist called Taping & Mudding Drywall School NEXT- ua-cam.com/play/PLCrazHylAOEndyM-LGT6PtbGfIYD5uiy-.html
☑ Get my 56 page Free eBook "Understanding Drywall Tools and Materials" at www.DrywallToolsBook.info
⭐⭐ ⭐ Please Visit my sponsors below, they help me afford to put out these videos ⭐⭐⭐
☑ DO YOU VALUE YOUR INTERNET PRIVACY? I do. You can surf anonomously with Surfshark- geni.us/getsurfshark
☑ Protect your home or business with Simplisafe, we love it- share.simplisafe.com/x/qobGJE
⭐ MY DRYWALL TRAINING BOOKS FOR SALE at www.ThatKiltedGuyStore.com ⭐
☑ WEBSITE INFO -You can find a lot of bonus information on our website at: www.thatkiltedguy.com
🛒🛒🛒 SHOPPING LINKS 🛒🛒🛒
- - - - - - (we earn 3-5% on these sales, but these are tools I recommend thank you) - - - - - -
☑ LEVEL5 Drywall TOOLS (Financing Available)
🟢 For a 10"/12" Flat Box & Pump combo set - geni.us/FlatBoxCombo
🟢 For the entire line of Level5 Drywall Tools- geni.us/o9r9vK6
🟢 A good all around Mud pan and knife set- geni.us/ize6U
🟢 For a 4 bladed mud mixer like mine-geni.us/FsjWx
🟢 For Full sets of Automatic Taping Tools- geni.us/Adlj
🟢 24" Metal Skim coating blade (Plus other sizes) - geni.us/XFCZH
☑ Miscellaneous Drywall Tools
🟢 Radius drywall Sander, great for all- geni.us/Radiussander
🟢 Affordable Texture sprayer hopper that I USE - geni.us/Hopper
🟢 The BEST Knockdown Knife - geni.us/KDKnife
🟢 Vevor Vacuum Drywall Sander - s.vevor.com/bfQtGq
🟢 For our full drywall tools store with my suggestions- www.amazon.com/shop/thatkiltedguydiyhomeimprovement
☑ Miscellaneous Tools
🟢 The BEST SIMPLE Stud Finder I've Ever used- geni.us/FranklinStudFinder
🟢 A nice hard case for the stud finder - geni.us/FranklinCase
☑ Miscellaneous supplies
🟢 Guardz torn paper sealer. Stops Torn Brown Paper from bubbling - geni.us/Gardz
DISCLAIMER : That Kilted Guy Video Productions LLC, cannot guarantee against improper use or unauthorized modifications of this information. We assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result, or any obligation for future assistance. Watching the video does not form a professional relationship or constitute receiving professional advice.
Thanks for all your videos you, Vancouver carpenter and drywall shorty are the only 3 experts I learn from you are super detailed and I really believe if you can’t get on the tools as much you should be teaching your experience is amazing.
Awesome! Thanks so much
I would suggest using Durabond any time you are are finishing over an odd surface, like concrete, block, wood, painted walls, ect. But only for the bed coat. I would also prefer it for all prefilling but like he said the other hot mud will work okay for that. Durabond has a lot more glue in it that makes it much better for such things. Bed coat only though. You don't want to have to sand that stuff. You'd be amazed at what you can do with some Durabond and fiberglass mesh. It really help when the top paper has been pulled off of some drywall, like when removing wallpaper.
Yep durabond is way better for prefill and bed coat. I use it when I’m doing plaster work.
@@SuperUncleRyan Thanks for that info. I'm getting ready to tie some new drywall into old plaster, and I was wondering which product was better for that purpose.
DIY Drywaller here. Hot mud is great once you learn how and when to use it. All the stuff you mentioned I too have experienced. You produce great content from your years of experience.
You are very right about the dirty water will change the set-up time I have told several people this and they don't seem to understand
I love durabond for plaster wall repairs or when i tie drywall to old plaster. But, i only use it deep and never as finish mud. Bob P taught me that trick.
Old kilti is my favourite plus he has a corvette sign on his wall so it shows that he's got great taste, keep up the good work old kilters.
I love mesh tape's low profile but it's vey helpful to hear that hot mud is essential for application.
Guy must have mentioned that before but I missed it.
Great video Guy. Your explanations are right on the money. I agree with everything you said! Rock on...
Much appreciated!
Except for pouring it into the sink 🤣. What i do when I use the sh*t is i treat it like sh*t and pour it into toilet bowl but while it's still soft just past the point of being workable and don't flush more than an average amount of sh*t.😆😂 then when you're done emptying your "butt" I mean bucket flush few more times...🤫👌🤣🇨🇦.
Or option 2 is to clean quick setting compound to the bottom of your bucket and WALK AWAY. Then the next day or maayyyyybbe 2 to 3 times the number on the bag, bring outside and give a few light taps on the bottom of the pale while up side down and plop goes the weezel.😂🤣👌👍😎👍🇨🇦🇨🇦. I seen a tile guy do this so I thought I'd give it a try just to see and by god it worked pretty good actually didn't even need to really clean the pale. Hey, there you go you should try those two methods on a video one day🤔😏👌👍🇨🇦 just noooo pooping plz lmao....🤣🤣👍
I always wash my tools outside never using customers thinks because potential blame for clogging toilet or sink is not my wishes
That's smart. I do the same in a customers home.
Sorry friend…it must be hell having a lisp so bad that it even carries over to your NON-verbal communications! Poor fella! Chin up tho buddy get out there and kick today’s ath!
😂😂
Jkjk my smartass just couldnt pass that one up (if ya still dont get it..its the “think” instead of sink typo) lol
Happy Saturday friend! 🫡🤘
I used Easy Sand 45 for the first time a few weeks ago, and I was a bit scared I was gonna screw it up. I had to prefill some wall to ceiling corner joints because the original installers didn't take the drywall to the edge on the ceiling, and left a 1/2 inch gap. Not sure if that's common practice, or not, but I prefilled so my tape had something to adhere to just in case. I'm glad you mentioned the P-trap drainage issue too because I had to poor the dirty water in the sink because it was either that, or dig a hole, and bury it in the backyard, lol.
The first time I bought hot mud I was clueless. I still have most of a sack of 5 minute mud and have no idea where I will use it now.
Pro approved! This guy knows what hes talking about.
Thanks for tips. I appreciate you!
Happy to help!
Great content as always!
I’m far from a pro and have experienced many of the problems you just described over the past couple months of renovating🤦🏻♂️…..and now I know why lol
Great review of the must dos. Thank you. This was ideal timing for me. I’m a tradesman, but not a drywaller. This refresher should lead to better results on this week’s repair projects.
Great videos! Thank you. Gives me a boost to start drywalling a closet.
. Thank you! You last tip about flushing lots of water thru the water trap, inspired me to use a paint strainer mesh bag in some sinks' drain hole to be a filter, as well.
I’m replacing a rusted corner bead and your tips have really helped. Liked and Subscribed!
Lots of quality information and user tips.
Thanks for the tips! I always use hot water. It seems to help it mix better and faster at the same time not reduce working time.
The pros make it look so easy 😭look how smooth and easy it goes on. No uneven spots no lines.
I avoid using hot mud when I can as a DIYer. The 90/45/20 etc yeah, it sets up, but it's still best to let an all day cure (especially for prefilling, it's great for that). There's not much I need done that fast as I'm not a contractor.
I've used all purpose over mesh just fine, but I can see why hot mud is best for mesh. It's rock hard when applied properly. Basically, patches and pre filling is it's best use for a home DIYer.
Also Easy Sand 😂 , it's a bear to sand.
Guy... Check out the additives made by Muddskip. The Level 5 and Basecoat Powders, when added to regular drywall mud will cause it to firm up in about 15 minutes to an hour. So you can apply another coat without waiting for it to completely dry. Also you. have a 24hr window where the material can be misted with water and reworked to smooth out and remove bubbles. The ability to rework the material would be most helpful when working over painted surfaces.
solid points. I used water from a bucket i cleaned tools in to mix a batch and that stuff went off!.
In Louisiana, 20 minute mud is more like 10-15 minute mud. Hot temperatures speed up setting/working times
I learned this first from tiling thinset that also sets up under water. First I scrape what I can into garbage and then use a bucket of water and brush to wash up. You can pour off the water once solids have settled. There's always a sizable solid mass at the bottom that would've been down somebody's drain.
The Bob Ross of drywall A++++++
strictly top notch advice !
What video do you offer that discusses pin holes after the mud dries on the wall, the before and after effect.
Thanks
I still need to do that video
I love the vevor skimming blades
☑ NEW, get my 56 page Free eBook "Understanding Drywall Tools and Materials" at www.DrywallToolsBook.info
☑ OR, for the full version with even more information & to support our channel, go to geni.us/DrywallToolsBook
ENTER TO WIN a 24" SKIM COATING BLADES and many other great prizes at: raffall.com/345505/enter-raffle-to-win-a-free-skim-coating-blade-hosted-by-that-kilted-guy-video-productions
ua-cam.com/users/sgaming/emoji/7ff574f2/emoji_u2611.png☑ua-cam.com/users/sgaming/emoji/7ff574f2/emoji_u2611.png
I do swear by Durabond90 for prefill as a bed for taping mud to avoid tape shrinkage in the center. It’s also good for larger variations - occasionally I have had to do use a thinner drywall patch as it was the only thing available it help build a strong surface layer to apply a cover and skim coat. I think you should do another whole series on drywall stains and moisture meter and primers and paint to fix annoying temporary water leaks…
I think it's incredible too on the city you're working and the chemicals they're using in their water with all the chloridean seems to make a difference I noticed that when I was doing a tile job and my mix for my grout Was weird Never had that before Was doing a job out of town and their water had high chlorine content
Hot mud or quick set is a bitch to sand if it’s too thick. I only use it for patch work. I’ve always been a firm believer of the best quality is using Synko taping, all purpose and their finishing compounds . Synko’s finishing mud is like a glass like smooth finish. There’s a reason Synko makes it.
If it hardens via chemical reaction, what does a painted wall have to do with anything?
You rock, sir. (Pun intended 😅) Thank you for sharing your wisdom. Respect🫡
DId 20 minute mud mixed up with warm water.. it kick in few minutes.. mad it to consistence of peanut butter.. started applying to wall it became unuse able. i had to scrape off. and used regular mud. in 5 gallon bucket.. I then used heat gun to dry reg mud.
. i tried experiementused auto body filler. Since a autobody guy. had better luck. in 20 minutes of autobody filler dried. i used joint compound over it.. worked great.. use body filler over mesh tape . holds great... how feel about fibermesh tape with joint compound.?
great tips thank you!
Good video
Durabond also ware’s your knives faster it seems to pit the edge also
thank you!
I think I and a lot of other people had the misconception that hot mud reaches its 100% dry point faster, but it does not. It only stiffens up faster and the entire point behind that is so you can put another coat of mud on top of the hot mud sooner than you can the other kinds of mud. I originally thought that since it was setting up sooner then it would also be dry sooner and that you could sand it a lot sooner than you can other muds but thats not true. It's made so you can add another coat of mud on top of it sooner but when it comes to sanding it has to be 100% dry and it does not 100% dry faster than other muds. Its right at the same amount of time to completely dry as other mud types.
You are correct except there is one other major reason for it setting up besides being able to recoat it quickly. And that is because by setting up it stops the shrinkage. Drywall mud shrinks because of the evaporation of the water but since this sets up before it dries it stops the shrinkage. It probably shrinks less than 5% compared to about 35% for regular joint compound.
@@ThatKiltedGuyDIY Wow I didnt realize it was that low of shrinkage (5%). Learn something new every day. As for the regular all purpose, that explains why so many times I come in the next day and the joints that I swore were complete are all showing the bulge of the tape again. I thought I was going blind or crazy but now that explains it. I'm really glad I've tried out different muds now b/c now i know the situations to use them in and that saves sooo much time and headache when you use the right mud for the occasion. And honestly I learned most of it right here on this channel! Merica!
Mud whisper ~ you ROCK
One more tip especially for us duffers: wear old clothes! I've been lazy and done some mudding - little spots, not whole walls - with street clothes on. Hey, if I get it on my clothes or shoes it will wash right out! Hot mud won't wash right out unless it is caught early.
For the same reason, a cap of some sort is a great idea. Getting a blob of hot mud dried in our hair is less than ideal. Just sayin'.
Good job all excellent
Smart tips 👍
are the "give aways on your channel also ,to payed member {iwill soon} only i live in Europe the Netherlands?
about the shipments and ready to take a membership,it will not work?is that the reason?only USA?please confirm😊
anyone should be able to enter
I'm trying to fix 8'x11' painted wall, last owners seemed to have practiced texture on it and then paint peeled in places. I was going to scrape/sand, prime with zinsser 123, easy sand 45, then prime again and paint. Missing or wrong steps? I'm so lost even after watching so many videos.
I’ll be teaching detailed classes like this in my new www.DrywallAcademy.com so be sure to go sign up for free.
I’ve a problem where the hot mud sets up way too quickly and reduce my working time tremendously. The bag states 20 minutes or so, but after just about 5 minutes, my hotmud is no longer in a working consistency. What am I doing weong? Am already using clean water, etc and mix it by hand using the instructions’ ratio.
Mix only until slightly smooth. If you try to mix till all the lumps are gone, you'll overmix and it sets up faster. Otherwise, not sure. Make sure you follow all guidelines in this video.
Great advice, but don’t wash mud down the sink period. It’s bad for plumbing and the sewer or septic. Find a discreet area of the yard where you can wash your tools outside
Not a fan but l know you need it. Thanks for telling me not to dump down the drain without lots of water.
Hot water doesn’t make much difference but hot air does
I think easy sand 5 is slower than it used to be.
I never hear anything about if you have to sand 45 min mud before you put regular joint compound over it
Because you don’t
I thought you were going to mix up some hot mud with all purpose and show me a trick 😂
Dirty water helps when your in a hurry
Why does this stuff burn my eyes?
I Remember we use to like to smell the texture
Does that to me also
❤
wipe off your tools before washing it off
Any tips for drying joint compound in very humid temperatures? I skim coated a already painted ceiling over 2 weeks ago and thought it was fully cured. To my surprise, after applying my first coat of primer, I noticed the primer was peeling off as I was painting it. The joint compound underneath felt moist to the touch. Had been running a high powered fan but still feels moist and the primer won't adhere. 🫤
The only tips are to lower the humidity, raise the temperature, and increase the airflow. In some cases you may have to rent a dehumidifier
What grit of sandpaper are you using?
80