If you do a tutorial. Make sure you state what button or link you are clicking on to get where you are going. It's hard to see where your mouse clicked. Where is that DPI panel?
I’m getting my laser machine today so I get Lightburn so how do I choose what software I need to get? I have no idea they got one for controllers and fiber so which one do I need to purchase in the Lightburn?
What settings in lightburn will make me burn upside down and reverse? I am running a Xtool D1pro and if I have the letter B it will burn with the B reversed and upside down, almost like I'm stabding in front of the back of the laser. Hope I'm explaining it correctly. Thanks
hi bro. thanks for the video. do you have a tutorial how to set laser head position for the effective cutting. Because my laser head is quite high from the material. thanks again.
While exploring that page one thing that would have been worth mentioning was the line interval in mm. I have a Longer Ray 5 10 watt and the diameter of the laser beam is .060 compared as to most being.080. This will result in a finer DPI. Hey there is a lot learn in Lightburn and you have to start somewhere and this a good video to do that with. 😁🛫
I don't know if you got your answer as yet since you posted 2 months ago lol, but I saw it today and you have to go to your windows option and select the ones you wish to see. Happy engraving!
hey great channel, would you tell me whats the overscanner and if any benefit out of it. like mine laser do is go around all the lines in the end of engaraving once again and I dont know why
Overscanning means that it gives a bit of extra path on each side so the laser can slow down and speed back up and can reach the same power setting by the time it makes it back for clean marks instead of it starting the other way trying to power up immediately into the mark without full power at first. To better understand it, select it and preview your cut selecting Show traverse moves and it will show you on each side. Hope I helped!
You asked if you missed anything and I laughed…naw, you covered it all. I gave a thumbs up because what you covered, you covered well. Your presentation style is also excellent.
If you do a tutorial. Make sure you state what button or link you are clicking on to get where you are going. It's hard to see where your mouse clicked. Where is that DPI panel?
First time with light burn.
You tell us how to do it but I don’t see where you are getting these menus.
Would be nice if I could find the DPI. Where does it reside?
when you have an image on your screen double click the SPD/PWR next to the photo photo layer in the Cuts/Layers tab
thanks for just opening stuff without showing how or where you did this
HOW TO SET UP THE MAINE PAGE ON NEW PROJECT TO LARGER PAGE FOR BIGGER OBJECT ? THANKS
Fyi to see the menu he is looking at you have to have a image with layers up then click the layer on right in top under cut /laser box
How to set power max and powre min, only power max comes in my apps
I’m getting my laser machine today so I get Lightburn so how do I choose what software I need to get? I have no idea they got one for controllers and fiber so which one do I need to purchase in the Lightburn?
I don't have image mode only line fill and offset fill.
What settings in lightburn will make me burn upside down and reverse? I am running a Xtool D1pro and if I have the letter B it will burn with the B reversed and upside down, almost like I'm stabding in front of the back of the laser. Hope I'm explaining it correctly. Thanks
Constan power mode what it is?
The angle tip was helpful.. been using 45 like an idiot
hi bro. thanks for the video. do you have a tutorial how to set laser head position for the effective cutting. Because my laser head is quite high from the material. thanks again.
How can I change my homing speed?
While exploring that page one thing that would have been worth mentioning was the line interval in mm. I have a Longer Ray 5 10 watt and the diameter of the laser beam is .060 compared as to most being.080. This will result in a finer DPI. Hey there is a lot learn in Lightburn and you have to start somewhere and this a good video to do that with. 😁🛫
What is the overscanning button for
Over scanning allows the laser to run past the actual stop point of the burn, to ensure it doesn't spend too much time on the edges while reversing.
@@Technivorous thank you
Another ussles video, is not showing what title suggest
How you open the laser settings I close it and I cannot find it anymore please and thank you
I don't know if you got your answer as yet since you posted 2 months ago lol, but I saw it today and you have to go to your windows option and select the ones you wish to see. Happy engraving!
Please stop moving the cursor around. It’s like trying to watch a fly flying around a room!
hey great channel, would you tell me whats the overscanner and if any benefit out of it. like mine laser do is go around all the lines in the end of engaraving once again and I dont know why
Overscanning means that it gives a bit of extra path on each side so the laser can slow down and speed back up and can reach the same power setting by the time it makes it back for clean marks instead of it starting the other way trying to power up immediately into the mark without full power at first. To better understand it, select it and preview your cut selecting Show traverse moves and it will show you on each side. Hope I helped!
Need ur help
Is your image mode set to dither for photos
Grayscale usually but I have done either. Just remember to increase the dpi!
Thanks for sharing 😊
Sorry
That's not what scan angle is used for. Watch more videos instead of making them.
You asked if you missed anything and I laughed…naw, you covered it all. I gave a thumbs up because what you covered, you covered well. Your presentation style is also excellent.
Learned nothing
Bulshido