DeWalt cordless glue gun - do DeWalt batteries fit Ingco tools?
Вставка
- Опубліковано 25 сер 2024
- So it turns out it's quite easy to convert an Ingco hot-melt glue gun to run off a DeWalt XR battery. Giving you a DeWalt cordless glue gun! Links below...
Links:
STL for connector - leigh.works/pr...
STL for clip - leigh.works/pr...
Blue spade/tab crimp connector - www.amazon.co....
Ingco glue gun on Amazon - www.amazon.co....
We launched our new website recently and forgot to carry the STL files over, a few of you messaged us looking for them. Those links work again now :)
thanks for advice, i purchased one off ebay for £21, i used the 2 STL files you put up & got two sets printed & delivered for under £20 , I've now ordered the ingco cordless sprayer & will use the others to convert that, massive thanks
Why hasn't DeWalt made their own cordless glue gun?
Это то что нужно! Спасибо!
Great video 👍
Thanks for designing that
Thanks a lot for sharing this. I was hoping DeWalt can work off of INGCO batteries since they're far cheaper.
Completed the conversion. All went well EXCEPT it might have been better had you mentioned that the DeWalt battery polarity is the opposite way around to the Ingco. Other than that, it's all good. The STL files printed perfectly on my Prusa Mk3.
does this mean to crimp the blue spade opposite
@@stanleyhoptroff No, because the glue gun looks like such a simple device that it only contains a heating coil and on/off switch, so it only has the two terminals and it does not matter which way around they are connected.
Thanks that’s really helpful/ clever.
great work!
what about the opposite, like can I use the ingco battery in the dewalt?? I'm guessing those batteries are cheaper than the dewalt yes ? and they have 4.0 amp models too I checked. please answer me my dude I know its 2 years later but curious.
dude, ingco original batteries only cost less than usd $18...why wld u not wanna work the other way and power ur dewalt tools for 1/5 the price instead?
Is the .stl still available ?
I’m looking for an adaptor to fit my X-ray batteries to the ingco spray gun. Can you help with parts?
I have a creaform 700 scanner I'll give it a scan for you when I get a glue gun
Awesome!
👍👍👍
how much time do you need to spend 1 battery
Great conversion project. Did you ever get that 3D scan mentioned way down the comments?
just perfect ;-)😉
Do you sell the parts to convert the glue gun, save me buying a 3D printer, brilliant idea, Steve.
In hindsight Ingco should of made their batteries 100% compatible with one of the top 3 DeWalt Makita or milllwake .Ingco batteries are cheaper they could of sold batteries to owners of the above cheaper .Also does a bit for environment making batteries comparable with other makes.They could even sell adaptors so you do not need to take the tool apart .You can get them for the top 3
Great video and it’s exactly what I’m trying to do with my glue gun but I don’t have access to a 3D printer, is there anywhere I can buy the printed clip and power terminal to suit a dewalt battery? Your help would be appreciated.
If its the exact same Ingco glue gun as in the video that you have then I can send you the 3D printed parts. Send me a message on Facebook fb.me/leighworks
@@LeighWorks Yes its the exact same gun and I'm trying to do the exact same thing with dewalt batteries. I've sent you a message on FB. Thank you.
You are a genius! I bought a Ing co gun thinking that my dewalt batteries would fit, but they don't. Now I want to try this modification as well. Do you have the 3D file to sell? I would like to print with my Prusa.
Another question is if my 5Ah batteries will fit and not damage the gun. Many Thanks!
There's a link to the STL files in the video description and your 5Ah battery will work fine, the bigger Ah rating just means it will last longer.
Thanks so much!
@@LeighWorks Hi, did you make a video of the actual process of removing and fitting of the old and new components? Was it easy to do? Thankyou
Hi mate, I’ve just watched the video and would like to try this myself but have no access to a 3d printer. Is there any way you could supply the printed piece? Or everything as a set ready to go? I’m from Astley so not far from you and can come to you whenever if you come up with a price..
Thanks,
Mike.
Can you help us make a video for our glue guns? We made cordless glue guns compatible with dewalt,Milwaukee and makita.
From what i can see the battery terminals are oriented opposite on each. Do think this would present a problem on slightly moe complicated tools? I. E. Tools with brushless motors?
Yes, the tools don't work, as MrGordons above, found.
Just glue gun or other ingco tools have low power battery?
hi bro are ingco tools good for a beginner Mechanic
Have dropped you a message on Facebook mate about getting some bits printed.
Could you show if ingco/total can be compatible with black and decker 20v?
Hello mate do you sell the parts to make this work with the dewalt battery? Iv just bought on off eBay as it said it was the same batteries as thousands of tools
Drop us a message on Facebook and I'll see what I can sort out. fb.me/leighworks
Hi a mate want me to print these off for him
But links not working for me so what 3d desgin website it on so am able to download
Thanks
I've just hosted the files on our website, I've checked the link and they appear to be working fine. If you are still having problems, find us on Facebook and drop me a message. fb.me/leighworks
Great work fella, I’ve just bought 2 of these glue guns thinking they fitted a dewalt battery, can you sell me 2 of these adaptors?
Drop us a message on Facebook and I'll see what I can sort out. fb.me/leighworks
I made a wood and aluminium conversion for this to take makita batteries. Excellent glue gun however I bought the jigsaw and that has a third terminal and it cuts off after a few seconds with the makita battery. Any advice would be appreciated
The plus and minus terminals are the wrong way around, so try reversing them. Note; on the glue gun it doesn't matter which is pos or neg.
I don’t have access to a 3D printer could you make me one please
Считаю пришло время всем унифицировать аккумуляторы 20 вольт и прочие, чтобы ставились на любую фирму...
Ха-ха. Каждая компания хочет продавать свои собственные инструменты