This will fail on all BMWs!. Coolant Flange Replacement N52

Поділитися
Вставка
  • Опубліковано 7 чер 2020
  • Replacing broken leaking coolant flange on my BMW 328i N52 with a metal replacement piece.
    This piece will leave you stranded as when it breaks off there's almost no way to fix it. What is a 15 dollar part ends up costing you 150 to have your car towed. Very easy to replace and should be done preventatively.
    N51/N52/N53/N54/N55/N20/N26/S55
    BMW 325i Coolant Flange Water Outlet
    BMW 330i Coolant Flange Water Outlet
    BMW 525i Coolant Flange Water Outlet
    BMW 528i Coolant Flange Water Outlet
    BMW 530i Coolant Flange Water Outlet
    BMW 328i Coolant Flange Water Outlet
    BMW 335i Coolant Flange Water Outlet
    11537649409, 11537605152, 11537603514, 11537598234, 11537592095, 11537591889, 11537585023, 11537584549, 11537581063, 11537580969, 11537578727, 11537566329, 11537560363, 11537552339, 11537550062, 11537545890, 11537541992
  • Авто та транспорт

КОМЕНТАРІ • 47

  • @rwsavory
    @rwsavory 2 роки тому +3

    Good video. Don’t wait until 100k miles. I replaced mine at 57k, and it broke into pieces while removing it.

  • @hamwoollard2651
    @hamwoollard2651 2 роки тому +1

    My 130i (n52) is loosing coolant fast. Hopefully it's something simple like this, and not my headgasket or something. Great video man

  • @donaldbarron7916
    @donaldbarron7916 3 роки тому

    Awesome show !! Just had this replacemed on my wife's 535i.

    • @autohut3720
      @autohut3720  3 роки тому +1

      Definitely a must do part. Very cheap and it can save one a tow truck ride or even a Headgasket!

    • @donaldbarron7916
      @donaldbarron7916 3 роки тому

      @@autohut3720 most definitely.
      These are some awesome cars but will dig into your pocket book. My wife loves it so I dug deep.
      Oil pan gasket resealed
      New motor mounts
      Lower control arms done
      High pressure fuel pump done
      Walnut blast intake done
      New vanos solenoids
      New coolant reservoir
      Differential seals replaced
      New transmission pan
      Oil filter housing gasket done
      Oil cooler gasket done
      New oil cooler
      New serpentine belt
      New belt tensioner
      New alternator
      Valve cover gasket done
      Injectors done
      2010 535i just hit 120,000 miles
      Running like a champion but you have to pay to keep it running like a champion !!
      Still have original starter and water pump and thermostat. I bought it just in case .

    • @autohut3720
      @autohut3720  3 роки тому +1

      @@donaldbarron7916 I had a 2007 335i. The N54 isn’t cheap to keep running as it should. Very rewarding to drive when it’s in good shape though. I think the water pump has a higher chance of just cracking as it’s plastic in those cars than it going out because of electrical failure. Always good to have a spare around

    • @donaldbarron7916
      @donaldbarron7916 3 роки тому

      @@autohut3720 what did you have to do maintenance wise on your 335i ?

    • @autohut3720
      @autohut3720  3 роки тому +1

      @@donaldbarron7916 my 335i sucked a belt into the engine 3 days into ownwership because of an oil filter housing gasket leaking on the belt and causing it to slip. That meant taking off oil pan and valve cover to clean the engine from belt material inside of it. This is why leaks aren’t left unchecked. I didn’t have to do much more because I didn’t have it for long but it would have needed injectors and transmission valve body solenoids and seals soon aswell

  • @perspolis1818
    @perspolis1818 2 роки тому

    You sound like Manny in Scarface. Good video

  • @robson.pampulha
    @robson.pampulha 2 роки тому

    Hello Friend, good to chat with you. Could you remember how much coolant was necessary to complete the cooling? Thank you.

  • @randyperez2783
    @randyperez2783 Рік тому

    Do You have a link to where I can buy that part from.?The Flange. TIA

  • @hugomeza2910
    @hugomeza2910 2 роки тому

    This just happened to me yesterday. But the piece you replaced didn’t break. The hose just came off. I’m going to buy a clamp from Autozone, You think it I’ll hold?

  • @jjejfd25
    @jjejfd25 2 роки тому

    Anyone have the piece or pieces go into the system? Will a flush get them through or is there any other trick to it? Will it flow through the thermostat or can I pull the hose and try to drain it from the flange end?

  • @SGFrenchies789
    @SGFrenchies789 2 роки тому

    i just changed this on my e90 guy was right youll need a tow truck
    just change it b4 it happens save yourself the headack

  • @AtomicPixel
    @AtomicPixel 3 роки тому +3

    hahaha great vid brother. "You'll blow the fuck out of your engine". So true.
    Cheers man!
    T.

    • @autohut3720
      @autohut3720  3 роки тому +2

      Lol it gets the point across better

  • @OmarGonzalis
    @OmarGonzalis Рік тому

    Where did you buy the red piece from ?

  • @deivyleon409
    @deivyleon409 Рік тому

    Did you have to empty the coolant to install it ?

  • @alexparedes6240
    @alexparedes6240 2 роки тому

    Just replaced mine but smoke comes from the engine bay. Radiator, thermostat, waterpump and valve cover gasket have all been replaced. Do you know what it could be?

    • @Ymrara5
      @Ymrara5 2 роки тому

      Do u have the pcv valve recall? Since u replaced the cooling system (unless u didn’t do all the hoses) That could be the cause, or coolant that’s spilled out into the bay

  • @wm3105
    @wm3105 2 роки тому

    My lower hose is leaking and no one has a video

  • @miguelmalando7066
    @miguelmalando7066 3 роки тому

    Hey bro where did you buy the o ring at ?

    • @autohut3720
      @autohut3720  3 роки тому

      I don’t currently have a source for just the o ring. It usually comes with the flange

  • @JuanMendoza-nl9fn
    @JuanMendoza-nl9fn 3 роки тому +1

    Someone know the bolt thread dimensions?

    • @JoseDelgado-ho1cf
      @JoseDelgado-ho1cf 3 роки тому

      No, however I ordered some through FCP Euro. You can find the part number on RealOEM (dot) com and search it on their website.

  • @gustavoreyes3180
    @gustavoreyes3180 3 роки тому

    Alguien en México sabe cómo se llama o se compra esa pieza ?

    • @autohut3720
      @autohut3720  3 роки тому

      Brother la pieza se llama Salina de agua. Aqui se puede comprar de metal en los Autozone no se si alla tendran esos tambien. Asegurate que sea de metal

  • @godzofking
    @godzofking 3 роки тому

    why do you have to bleed the coolant?

    • @autohut3720
      @autohut3720  3 роки тому +1

      Because there might be air in the system and that is not ideal for it to pressurize and cool properly aswell as you won’t have enough coolant in place. This piece is right at the cylinder head so you’re compromising the whole engine with air instead of coolant if you don’t

  • @melissa7692
    @melissa7692 3 роки тому

    Do you know were he bought that part at? The site

    • @autohut3720
      @autohut3720  3 роки тому +1

      Suckmyink_tho Misfire Race. It can be had for cheaper in other places though.

    • @vengeance2.0
      @vengeance2.0 2 роки тому

      @@autohut3720 what’s the specific piece call by chance? I came to auto zone and they were clueless how to even order one.

  • @raybutts9133
    @raybutts9133 3 роки тому

    what year is this car and how many miles does it have?

    • @autohut3720
      @autohut3720  3 роки тому

      2008 328xi. Probably 110-115k or so at the time of this video

    • @raybutts9133
      @raybutts9133 3 роки тому

      @@autohut3720 Thanks for your reply.

  • @LikquidDutch
    @LikquidDutch 3 роки тому

    Yeah mine was brittle as fuck broken into small parts on my N54 335i had to fish out all the shit. When I replaced my drive belts and pulleys while there also installed crank seal plate . BMW makes great engines but they make shitty quality parts that fall apart or break around the motor .

    • @autohut3720
      @autohut3720  3 роки тому

      This is likely a result of the people managing finances wanting to make stuff for cheaper. If the aftermarket can sell these metal ones for 10 bucks they’re probably making them for cents. Yet BMW decided not to spend that on these cars and their long term reliability

    • @samvocella
      @samvocella 3 роки тому

      If bmw makes great engines, you wouldn't need to replace this plastic part.

  • @AndrewNichols
    @AndrewNichols 3 роки тому +1

    mine blew out in the driveway.......REPLACE YOURS NOW!!!! $20

    • @autohut3720
      @autohut3720  3 роки тому

      Lucky place for it to fail, mine did out of work

    • @AndrewNichols
      @AndrewNichols 3 роки тому +1

      @@autohut3720 It was at 12am but yes......and like everyone, I had no idea this was thing until it happened......so common

  • @iiplaya
    @iiplaya 3 роки тому

    Deciding to just replace the belt ofhg and coolant flange at once because i don’t want money siphoned out my ass