WILL IT START!? 42 yr Old Truck LEFT ABANDONED for over 10 years..
Вставка
- Опубліковано 20 жов 2024
- In this video we see if we can start up this old International truck that was purchased from an auction then drove to the spot you see in the video and sat for over 10 years.
If interested email us at wiley.dec@gmail.com.
SERIOUS offers only.
Finally just a channel with Willie no offense hank
When that truck started the way it did I said wow!
Hi there Wily nice to see you I am in England I am 75 broke and busted but I love watching you do things bless
I like when this old man emotions are coming out his knowledge is impressive
“I can plow a field all day long
I can catch catfish from dusk 'til dawn (Yeah)
We make our own whiskey and our own smoke too
Ain't too many things these old boys can't do.. “Wiley I heard this one today and I thought of you!! Your the man Wiley god bless !! Keep up the good work!!!
Thank you.
Thanks for watching
Yessar old bocephus!!🤠😎👍💗
Glad you started your own channel.
Wily I watch yours and hanks videos more then I do tv enjoy watching the old trucks and stuff start after years 👍
Thank you
Now THAT was a cold start. Way to go Wiley, good job getting her going. Be safe on your way home, especially with your pully wibble wobbling. Can't wait for your next video and for the next video with Hank =)
She just needed to clear her throat before she could sing 😁
I've seen these videos pop up on my news feed alot lately... I've watched a few... Today this video popped up and after seeing the quality of these start ups I'm gonna subscribe... This is quality content at it's finest.. 💯👍
Thank you
Thanks for watching
We have S2600 S line International here in Australia. Great trucks. Thanks for the entertainment Wily.
Thanks for watching and the information
The engine runs like new. Incredible! Love them old trucks.
Thanks for watching
Since you have a lot of room out there,here's what worked for me once- Roll down a hill, or have your boy push you.Then you can slip it into gear by gunning the throttle,and letting off... Then drive it around out there with the clutch in and maybe it'll pop free. And then the clutch disc will sand the flywheel clean.I hate when that happens,but that,s what I had to do.I guess I could have sanded the flywheel by hand.NOT! I'm looking forward to your next video. Thanks.
Good dependable truck. Only one better motor for it- 3406c CAT! Great will it start. again! Keep up the great content. An addicted subscriber!
Thank you
Thanks for watching
The ole girl fought ya..but you got it fired off and that was amazing. Truly enjoy your content and best of all no jokes😂. Appreciate you sharing your day with us and thanks for doing what you do.😊🛠️🇺🇸🛻🚜🔧
Thank you for watching
Great old truck great start up great video thanks Wylie and Jacob
I think that was our first one
Thank you for watching
I love your videos Wiley 🙂 I wish there were abandoned trucks here in england like this one. Please keep up the great work sir. James from england 🙂
Great video Wily,,your face of surprise when the truck started👍👍and remember...don't be Wily...😂😂
I was surprised. I was thinking to myself this thing is not going to start. About that time it did
Thanks for watching
GOOD JOB WLLEY AND JACOB I AM FROM BRAZIL MAY GOD BLESS YOU ALL
Thanks and thanks for watching
Me llega este viejito la emoción en su cara cuando hace encender estas hermosas OLDSCHOOL máquinas. Ese motor suena como nuevo 😅
Sounded real well wily.great job getting her started.cummins engines go forever.nice weather you got there its 5 degrees cold windy and wet here in ireland....
Hope it gets warmer
Thanks for watching
Awesome, will it start? Wiley, I appreciate you, buddy 👍
Thank you
I didn’t think that one would crank , good job Wiley.
Me either. I thought Jacob and I had struck out again but then it changed its mind
Thank you for watching
nice job wily
If you look close at the stick where it goes in the transmission right before the boot on top of the trans you snapped the stick 3/4 of the way in half you can see the crack.
I will check that out
Thanks for watching
I saw the same thing. Also, pull it forward to release the pressure. Backwards will only bind it more
Enjoyed the video fellas 🙂👍 It's a shame it wouldn't move under it's own power *but* I'm happy to see it run good 🔧🔩
Thank you
And thanks for watching
Zane, I was just about to tell you about this channel and there you are in the comments 😂😂😂😂
@@kevinlamarr1424 thanks Kevin! 😁 I'm enjoying this channel 🔧🔩 I enjoy their style and the projects they find
@@HODGEPODGEDODGEGARAGE
Yeah it’s like when you are just hanging out with a buddy working on old stuff. The whole thing is to enjoy the day not showing how much you know or how many tools you have in your $25,000 toolbox 🧰
Jacob Go Get The Dang Battery Jump Box…!!!
Mr. Wily is correct those Cummins are all day long STRONG.
Getting to be one of my favorites to watch
Thank you
Thanks for watching
Thanks for another great video.
It was interesting and enjoyable.
Well you got that old unit to start and run. Did not sound too bad. Good job Wiley and Jacob.
Was a little stubborn.
Hope you can get some of the parts sold Wiley
Thanks for everything.
The Iowa Farm Boy.
Thank you for watching
Just another great video as always enjoy watching keep up the great work stay safe
Thank you
All it wtd was some encouragement check out that water spout 👍 the diesel whisperer strikes again & off she goes look forward to the next one 👍👍👍
Cool video Wiley & Jacob, the engine sounds in good running condition 👍 👍
Beautiful old truck....sound great too!
Wow! The old S Line Inters were hugely popular in New Zealand and Australia. Most were 290 or 350 Cummins with a 15 speed RR. Apart from the Hendrickson rear suspension they were nice to drive.
Thanks for watching
Some had silver 6V92TAs and the Louisvilles too which an engineer in NZ made a prototype and the company adored it.
Dontbewily Hope you Can get That Truck Up and Going Keep Up the good work Billy Lizza Uniontown pa
Thank you for watching
I worked at my local Covington Heavy duty in college. Learned a lot about these big rigs working there. Hell of a place to get parts they got everything
They do
Thanks for watching
You were in southern Alibama, We are in southern Ontario (Canada). You have a good day sir. I recognized that "square box" cab as an International S series, there were a few in the company's fleet. Thanks for the memories..
Thanks for watching
Sounds danm good I’m really surprised it started that fast
Me too
Thanks for watching
Definitely sounds like a great running engine! Too bad about the transmission....how about that for luck? 😣 I remember they also used the S-series for school buses too, so I bet it was a single axle. Good work, Wily!!
Thank you
And thanks for watching
Im in florida would really love to see you move them around when they run
Thank you for watching
I worked for IH from 1969 to 1983 at the truck plant in Springfield, Ohio.
I worked as a repairman on the end of the assembly line. No doubt I worked on it..
Thank you for sharing that
And watching
I like your videos wily , better than when you’re with hank ….
good video i have the same problem i never remember my glasses that old darling ran pretty good for sitting for years God bless
Lol
Thank you for watching
Flatbed ford was good lookin
Right next Door in Georgia Wiley
Thanks for watching
I thought that wouldn't ever start. Big surprise.
I was right there with you
Then all the sudden
Thanks for watching
Well I hope y’all get her cranked today brother, oh I thought this was the Mack at first Wiley!
Lol. I have given up on the Mack
Thanks for watching
You and Hank always have good luck with Cummins on Hamiltonville Farm videos too.
Thanks for watching
Enjoyed the video Wiley! That baby ran good. God bless you all
I thank you and thanks for watching
You got her going
Thanks for watching
Wily, you've raised a fine young man there in Jacob. Jacob, treasure your time with your Dad.
Thank you
that engine changed its mind all of a sudden...
Lol
Yes it did
Thanks for Watching
Louisiana here brother, nice cool weather here, cool front came through but it won’t last long brother! Heavy humidity will be back!
Yes it will
Thanks for watching
Another great video sir
Thank you
Great work!!! 😊
Thanks for watching
Very good job and God bless yall
Thank you
Good Video we're following up
Enjoy your videos from Monroeville
Thank you for watching
Great video
darn good video thank you
Thank you
These videos are so much better without hank being a cornball through the whole thing 😂😂😂
Nice track 🌹
Cummins is a plus to me brother, you usually have good luck with those my friend! I love a Cummins, to me they are awesome engines! 👌🏻👌🏻🤙🏻🤙🏻
Thanks for Watching
Look at that, the cameraman is more helpful than Hank.😂😂😂😂
Lol
Thanks for watching
That's why they call em hummin cummins. They run so good. I knew you would get her fired up.
Thank you for watching
I like your videos. You get right to it without the jibber jabber.
Small cam Cummins will have a compression release a big cam Cummins will not. But I see your having clutch trouble. But whenever possible releasing the clutch will remove the drag of the transmission when starting the engine. We always release the clutch up here where I live. But I am still waiting for the Wiley`s don`t blame us if you become famous caps and shirts. Thank you for another nice video.
Thank you and thanks for watching
I did not know that about the small cams. Thanks for sharing that
@@DontbeWily Your welcome. And tell Hank jokes at the end of his video`s please.
1995 is when the area code in southern alabama changed from 205 to 334
Such a shame. You got so excited when she fired up for the first time and then it really disappointed you by getting stuck in gear. I felt so sorry for you.
Wow,that was cool when that International conventional fired up.Boy! ,your face lit up! It's really cool someone feels like I do around old,forlorn trucks. Looking forward to your next video. Um,--- Rattlesnakes!?
I was shocked. Spinning so slow
Thanks for watching
That looks like my 89 s1900 Wiley does he want to part that truck out? I could use a couple parts for my s1900 does the fuel gauge work and speedometer?
thats why they say "Cummins Fun"
Allied moving company had a whole fleet
I jack a cab over 20 years ago something was in the sleeper and fell through the windshield
You can take the shifter out buy 4 bolts you may cam use prise bar get shift leavers back to neutral
Thanks for the info and watching
Great job Wily ❤ it, Who is Jacob ?? All the way from Ireland 🇮🇪
Jacob is my son
Thank you for watching
Those usually came with a walking beam suspension that’s a rear cutoff from a Mack does it have elephant ears
Hello wily. You cant kill those old cummins.
That’s true
Thanks for watching
S2600 predecessor to the L10.
I want that truck ❤
Hook the jumper cables to the starter 😂
At 33:50 you can see a crack in the weld at the top of the gear linkage. Have you cracked the weld when pushing the lever in the cab?
I will check it out
Thanks for watching
i injoy watching your videos wily im from new zealand
Thanks and thank you for watching
Show o vídeo ❤
Ya I like wiley too he's a pretty good Ole boy we say grace and we say mam if ya ain't into that we don't give a damn
The old girl sounds pretty good.
It did. I was surprised honestly.
Thank you for watching
If you know someone with a scrap yard and has a crane with a magnet ask them the next time they change the cable going to the mag from the rudamatec if you can get it they make great heavy duty jumper cables just put heavy duty ends on ot
I actually have some welding leads I am about to make a set with.
Thanks for watching
I should drive the same one same series for allied moving
I was born in 1981, so far still kicking😂😂😂
Thanks for watching
Ya,buddy Tim Gentry wants it
Good truck forever
You sure know what you are doing messing around with the old vehicles
Thank you and thanks for watching
Keep swinging
It looks like the shifter handle cracked when you thought you broke the shift fork i bet that old hollow metal just gave way watch at 33min 48seconds.. it looks cracked under that bracket
I think so too
It felt like metal giving
Thanks for watching
Hola amigos Marcelo consulta el internacional lo venden cuánto tiempo abandonado estuvo que presio en dólares un camión lindo me gusta desde ya les mando un abrazo alos dos gracias me gustó ese camion
Sold them
Thanks for watching
Great video Wily. Are you in Florida?
Alabama. Florida line is 20 miles or so
Wow All you'd have to do is disconnect the drive shaft.
Thanks for watching
Definitely not enough battery brother, need two trucks hooked up to it!
Thanks for watching
I am in north pole, Canada
Wow
Tell Santa hello
Thanks for watching
I got married in 1981 and still married to her
Congratulations
Thanks for Watching
I was born 1982
Too bad about that clutch. looks to be a half way decent truck.