The dip oil dip stick is on the left side of the engine, down low. That is where it is on my 550 tlb. She is knocking quite loud. Could be low on oil or rod knock. One of the wires on key switch goes to the manifold heater. My 550 has to be in neutral on the 4 speed box to start
Looks like a 256 ci engine. Should be the same as a 6/68-75 5000 or a 5100 or 5600. Dipstick is under the starter, these fords always have the dipstick mounted to the flange where the oil pan bolts up. It’s a short little thing. Man, that is one helluva nice machine! Some new glass and an AC kit if your buddy wants and she’s ready to go to work!
Some msnufacturers use straight minus wire from battery to starter ground to ensure strong enough current. Positive wire goes to a solenoid, so that wiring is almost normal.
It’s a 1086 not a 1066. It’s one of the last models of a true International tractor before it was sold to CASE. The tractor if bought at the right price would be a money maker.
@@martymartin2894 There's a reason why they are red with the IH still on the side, along with a reason why they are using the IH Magnum transmission rather than the Case Powershift.
Seeing you eventually tinker on the big wheel loader would be cool. It would be a shame to see it get scrapped especially if it ended up being good enough to be useable. :)
I have a Ford 655 D with 1400 hours the motors are the greatest when they're good and tight good reliably starting with just a little with the ether and the very cold
We had a 750 or 7500? It’s been a bit but it had hydraulic steering was great as long as you could keep oil in the system thanks for bringing back some memories for me 😂😂 fun machine to work .
i went to a scrap yard and found a nice long 1 inch forklift cable to turn into jumper leads. i put 800A alligator clips on to jump most things. by the looks of it you might consider the same. or an auto electrician friend used a chain for ground and a giant positive.
Take a look at three or four very successful UA-camrs, Jesse Muller, Andrew Camarata, Diesel Creek and Marty T. Each of them have been successful showing equipment videos with little if any face time. This is a positive observation and will help you to succeed just like them.
When digging, the hoe should be up off the ground, a friend of mine was digging with a backhoe once and he didn’t lift the backhoe high enough and bent the axle rods in the rear axle because the back tires were still touching the ground while he was digging being really ruff with the equipment. But that’s because he wasn’t trained for that peace of equipment.
watching this many months after the fact but im left with a bunch of questions...why didnt your buddy buy it? what was the price, was it just too high? and what wound up happening to it?
I've been following this series and have no idea what scrap value might be. Can you give us any idea of how you determine a value? Do you basically just pay whatever scrap value might be? You estimated the backhoe at about 20k pounds. If scrap is at $100 a ton that would be about ten tons. So would you pay $1000 for the machine? Just very curious.
Ohh my td 9 my peoples had 1 as I was in my early 20s . A stuck steering clutch project turned into all the bearings in the final drive and seals then idlers and rollers lead to track frames and drive chain. Never got to finish things happened within my family n wound up scrapped. Shameful
yep, that disrespect to the owners of the machine ticked me off too. If someone lets you tinker on their stuff, then that means they trust you and you do not cause unnecessary damage to someone else's property.
It's sad that people don't want anything to do with equipment and they don't no what they have so they just junk it even though it's in weeds doesn't mean it's junk... The best thing is when the man gets old where he can't do anything with what he has it's better if he sells it to someone who can use it.. otherwise it could all end up in a scrap yard
HYDRAULICS require higher engine revs to provide proper fluid flow. IH tractors have loyal followers making them highly needed by farmers and large land owners. JimInCincy.....
That is what is known in the excavation world as a good enough to get the job done model my ex father in law would say Everytime he saw a ford no ford never made a working backhoe that could keep up with a case or a cat!
Engine needs some work that pinging or knocking sound I hear in the video isn't normal but good news is it hasn't came apart yet so it can be rebuilt but deff needs some engine work
@@ShainAndrews or whatever term you think is better man whatever makes you happy just giving my thoughts on it as someone whos around alot diesel construction equipment everyday
Those ford motors of that time like the smaller 201, in the 550 and 555 all have the a loud ticking noise, they never are quiet is kind of a just a quirk they have, the motor in this backhoe would be a ford 256ci 4.2l or the reman name the BSD442 very similiar to the ford 268CI 4.4l or BSD444 they share the same loud ticking/clanking noise that the ford 201CI 3.3l Or bsd333 have, it’s just how fords are
This machine doesn't look anything like a scrap machine. Tires are like new. Looks like it wasn't out long in weather either. No mold or anything on it.
because he was too lazy to spend more time to find the dipstick, so he just decided that because it was not his machine anyway so who cares if something gets damaged.
diggers don't have a pto, hand throttle is on the right side of the dash right in front of you. the tractor was a 1086 omg you know sweet fa about any thing
Sigh... I have never seen a video of so much losses to the "shredder" before.... at this point I would have offered to buy the property housing "said' machines, just to have the chance to save them.
I could have told ya myself that buying a random key from Amazon wasn;t going to work. keys are amde for specific locks, buying a random key wont work.
In the older construction and farm machinery side of things many machines have common brand specific type ignition/ door key with only 2 different versions available. The problem comes when guys swap switches to another generic auto parts store switch or you just buy the wrong key maybe for a newer type ford machine like Tyler possibly did. One youtuber I watch changes all his equipment to CAT style ignition switches so 1 key type type fits all his equipment. I also have a massive bunch of keys here that I used to take to auctions with me to start all types of different equipment brands. The newer stuff has more security features to stop it getting stolen so it's not that easy with some of it now.
Everyone seems to think new and make payments. People who own them get old and really could care less about this equipment so just scrap it and no one else can use it... Even worse, Many people won't walk across the street to help a neighbor if his/their farm was on fire. No one trusts the other person because of something said or done at some time. You might just start making notes in your phone since that is the new pencil and paper. I know your busy, yet wonder why you have troubles remembering a week of things done or accomplished... is that your M.O. at home? I'm seventy four now and yes, I too do have troubles remembering where something is at but as young as you are causes me to worry about how much stress your under. I guess people just don't care anymore about much of anything but themself.
Love the channel but this one is a bit too obvious. It has brand new tires and not a bit of green mold or anything from sitting out in the weather. Looks like it was driven out of a dry shed and parked their.
I agree it wasn’t sitting for that long but I am being honest that no one around could tell me if it ran and worked, how well and the last time it ran. I figured I would find out for myself and take you guys along with me 🤷🏻♂️
16:17 Nice first start after figuring out the hacked up electrical system! Cant believe it turned over & started right up no problem. You gotta get an easy one every once in a while! Its sad that people will just scrap something like that so easily. I guess we're built differently than most people huh? 👍🏻👌🏻🛠️🔧🔩🚜⚠️🚧🏗️⚡💥💨💨
The dip oil dip stick is on the left side of the engine, down low. That is where it is on my 550 tlb. She is knocking quite loud. Could be low on oil or rod knock. One of the wires on key switch goes to the manifold heater. My 550 has to be in neutral on the 4 speed box to start
They probably parked the backhoe because of the steering problem. Well done on your troubleshooting. I enjoy this type of stuff.
👍
Looks like a 256 ci engine. Should be the same as a 6/68-75 5000 or a 5100 or 5600.
Dipstick is under the starter, these fords always have the dipstick mounted to the flange where the oil pan bolts up. It’s a short little thing.
Man, that is one helluva nice machine! Some new glass and an AC kit if your buddy wants and she’s ready to go to work!
Some msnufacturers use straight minus wire from battery to starter ground to ensure strong enough current. Positive wire goes to a solenoid, so that wiring is almost normal.
That thing is in great shape for its age
Nice work. Yeah it’s sad to see how much people scrap good stuff
Cool equipment it brings back memories glad some is being saved.
Thanks for your efforts to keep it all alive.
It’s a 1086 not a 1066. It’s one of the last models of a true International tractor before it was sold to CASE. The tractor if bought at the right price would be a money maker.
Do you think the old international tractor's were better than the case.
@@martymartin2894 Nope.
@@martymartin2894. Yes 100%
The 88 series was the last models before Tenneco bought the ag line.
@@martymartin2894 There's a reason why they are red with the IH still on the side, along with a reason why they are using the IH Magnum transmission rather than the Case Powershift.
With some simple lock picking skills you could have easily picked that ignition switch
Something to think about
why bend the cover ? there was only couple more screws .
that totally annoyed me too. It is not his machine, so let's do some damage to it????? What a jerk move that was!
Seeing you eventually tinker on the big wheel loader would be cool. It would be a shame to see it get scrapped especially if it ended up being good enough to be useable. :)
I have a Ford 655 D with 1400 hours the motors are the greatest when they're good and tight good reliably starting with just a little with the ether and the very cold
Sweet start up Tyler.
Save it!👍🏼
That machine looks pretty good.
Too good to be true lol
@@dieseJL fired up good with no starting fluid.
Those machines will do you proud even if they are 40 years old.
We had a 750 or 7500? It’s been a bit but it had hydraulic steering was great as long as you could keep oil in the system thanks for bringing back some memories for me 😂😂 fun machine to work .
Sometimes you have a safety on the clutch
Amazing starting and working good work
i went to a scrap yard and found a nice long 1 inch forklift cable to turn into jumper leads. i put 800A alligator clips on to jump most things. by the looks of it you might consider the same. or an auto electrician friend used a chain for ground and a giant positive.
Love your videos keep up your good work:)
Take a look at three or four very successful UA-camrs, Jesse Muller, Andrew Camarata, Diesel Creek and Marty T. Each of them have been successful showing equipment videos with little if any face time. This is a positive observation and will help you to succeed just like them.
WOW ...What a find hope you get it could make some good coin off of it for sure. I would love to have that in my driveway.
Great video👍🏼🇨🇦
Looked like the first key was the correct key. My family ran all Ford hoes in Canada. The ignition you pulled is not factory.
Did you look under the visor?
Good.job Nice tractors good show 😃👏👏👏👍👍👍👍😍
Very interesting,let’s see it at work. Almost too much face time. It will be interesting to see the rest of the equipment.
Hey buddy don't know if you said already. But what is your day job?
Keep up the good work 🖒
👍👍
1086 tractor. Probably 10,000 to12,000 bucks. Running and working
Ford, the best
Great video!
When digging, the hoe should be up off the ground, a friend of mine was digging with a backhoe once and he didn’t lift the backhoe high enough and bent the axle rods in the rear axle because the back tires were still touching the ground while he was digging being really ruff with the equipment. But that’s because he wasn’t trained for that peace of equipment.
my 550 is a 3 cyl 3.3 liter diesel but its older.
watching this many months after the fact but im left with a bunch of questions...why didnt your buddy buy it? what was the price, was it just too high? and what wound up happening to it?
My mistake . Dip stick not in the same place as my 550. 3sparewashers is correct.
I've been following this series and have no idea what scrap value might be. Can you give us any idea of how you determine a value? Do you basically just pay whatever scrap value might be? You estimated the backhoe at about 20k pounds. If scrap is at $100 a ton that would be about ten tons. So would you pay $1000 for the machine? Just very curious.
Ohh my td 9 my peoples had 1 as I was in my early 20s . A stuck steering clutch project turned into all the bearings in the final drive and seals then idlers and rollers lead to track frames and drive chain. Never got to finish things happened within my family n wound up scrapped. Shameful
I was waiting for ya the hammer your jeep, you left it so close to an unknown backhoe !!!
Dude you bent the cover in the cab.
That. Sucks. Otherwise cool vid.
yep, that disrespect to the owners of the machine ticked me off too. If someone lets you tinker on their stuff, then that means they trust you and you do not cause unnecessary damage to someone else's property.
Nice
Was there anything inside the snowmobile trailer?
Could change the $ 10 key switch key comes with a new one
Cool tracter well dine on getting it going and half waybthrough your video there was no sound
It's sad that people don't want anything to do with equipment and they don't no what they have so they just junk it even though it's in weeds doesn't mean it's junk... The best thing is when the man gets old where he can't do anything with what he has it's better if he sells it to someone who can use it.. otherwise it could all end up in a scrap yard
Good night from the mango farm
HYDRAULICS require higher engine revs to provide proper fluid flow. IH tractors have loyal followers making them highly needed by farmers and large land owners. JimInCincy.....
That machine was made September 21, 1985. Give or take at 9:00 AM.
That is what is known in the excavation world as a good enough to get the job done model my ex father in law would say Everytime he saw a ford no ford never made a working backhoe that could keep up with a case or a cat!
Great video but there's something wrong with the audio, especially for those listening with headphones.
Geart works
Engine needs some work that pinging or knocking sound I hear in the video isn't normal but good news is it hasn't came apart yet so it can be rebuilt but deff needs some engine work
Pinging? Knocking? LOL.
@@ShainAndrews or whatever term you think is better man whatever makes you happy just giving my thoughts on it as someone whos around alot diesel construction equipment everyday
Those ford motors of that time like the smaller 201, in the 550 and 555 all have the a loud ticking noise, they never are quiet is kind of a just a quirk they have, the motor in this backhoe would be a ford 256ci 4.2l or the reman name the BSD442 very similiar to the ford 268CI 4.4l or BSD444 they share the same loud ticking/clanking noise that the ford 201CI 3.3l Or bsd333 have, it’s just how fords are
Truth that sounds like it should they are pretty loud. My 655d sounds the same pretty much. Mine has side covers so a little quieter
This machine doesn't look anything like a scrap machine. Tires are like new. Looks like it wasn't out long in weather either. No mold or anything on it.
I’d buy it even if your buddy wanted it or not.
Did you find out what ever happened to the John Deere with the sickle bar mower??
pos goes to the solenoid and neg goes to earth on the starter body quite simple!
I’d fix that back hoe I’ve fixed my 555b in worse shape I wish I could have found one like that. That’s a great machine
Why didn’t you check the engine oil before you tried to start it?
because he was too lazy to spend more time to find the dipstick, so he just decided that because it was not his machine anyway so who cares if something gets damaged.
What is that unintentional metallic contact?
Thanks for sharing your adventures. Well done video good edit. Very entertaining.
So basically there was nothing wrong with it not even a flat tyre. That heavy knock in the motor might be a problem. How long has it been sitting.
diggers don't have a pto, hand throttle is on the right side of the dash right in front of you. the tractor was a 1086 omg you know sweet fa about any thing
Dip stick all ways started my tractor
Sigh... I have never seen a video of so much losses to the "shredder" before.... at this point I would have offered to buy the property housing "said' machines, just to have the chance to save them.
😁👍👍
It hurts my brain too 😭 lol
I could have told ya myself that buying a random key from Amazon wasn;t going to work. keys are amde for specific locks, buying a random key wont work.
In the older construction and farm machinery side of things many machines have common brand specific type ignition/ door key with only 2 different versions available. The problem comes when guys swap switches to another generic auto parts store switch or you just buy the wrong key maybe for a newer type ford machine like Tyler possibly did. One youtuber I watch changes all his equipment to CAT style ignition switches so 1 key type type fits all his equipment. I also have a massive bunch of keys here that I used to take to auctions with me to start all types of different equipment brands. The newer stuff has more security features to stop it getting stolen so it's not that easy with some of it now.
Идеально
😃😃😃
Not smart to start an engine that's been sitting for a long time without checking the oil or even replacing it 😕
It is a 6600 tractor
No it isn’t. It’s a backhoe. It would be more like a 5610 or 6610.
20,000lbs??? Come on
no power fluid. running engine; pump is junk, one pint of ps fluid ten bucks du
Scrappers are the worst
Everyone seems to think new and make payments. People who own them get old and really could care less about this equipment so just scrap it and no one else can use it... Even worse, Many people won't walk across the street to help a neighbor if his/their farm was on fire. No one trusts the other person because of something said or done at some time. You might just start making notes in your phone since that is the new pencil and paper. I know your busy, yet wonder why you have troubles remembering a week of things done or accomplished... is that your M.O. at home? I'm seventy four now and yes, I too do have troubles remembering where something is at but as young as you are causes me to worry about how much stress your under. I guess people just don't care anymore about much of anything but themself.
Love the channel but this one is a bit too obvious. It has brand new tires and not a bit of green mold or anything from sitting out in the weather. Looks like it was driven out of a dry shed and parked their.
I agree it wasn’t sitting for that long but I am being honest that no one around could tell me if it ran and worked, how well and the last time it ran. I figured I would find out for myself and take you guys along with me 🤷🏻♂️
@@dieseJLno bother I like the channel and wish u every success.
very poor skills and troubleshooting. Alot of assumptions and "let's try this" . Need some basic electrical knowledge.
Your so cool I want to be you 0:49
Don't buy it get a John Deere 4430 or a 4440
16:17 Nice first start after figuring out the hacked up electrical system! Cant believe it turned over & started right up no problem. You gotta get an easy one every once in a while! Its sad that people will just scrap something like that so easily. I guess we're built differently than most people huh? 👍🏻👌🏻🛠️🔧🔩🚜⚠️🚧🏗️⚡💥💨💨