Nice work, the housing is very stiff made and good quality. I have the 250s4 in a 50 liters closed housing, will do fb 34 hertz. it is placed in the middle of the longer wall to reduce modes. For low bass i have Transmissionline with 4 meters. look for visaton TL sub MK 2. Makes a lot of fun. Can also be made from two w250s4 in a reduced square.
Too much bracing, all the 90° angles in the box will drop some dB's. The frequency wave traveles easier on smooth surfaces! A good tip if you want to make your enclosure more resistent would be thicker or double MDF
Wow, that's quite something. I do repair audio gear but never thought of building. Could I ask what kind of marking pen / pencil do you use on the MDF, please? Are you happy with it?
What if you dont have parameters of the woofer? In my case klipsch k27k with bic power amp plate and i want to make a build. What design should I follow?
It is best to measure the woofer parameters. Here is a guide using a pc with REW and a 100ohm resistor: www.roomeqwizard.com/help/help_en-GB/html/impedancemeasurement.html
Hello. I am planning to build a subwoofer too so i have a few questions if you don't mind. What brand of amplifier did you use ? Can you recommend a good sub amp ? How come you chose a 4 ohm version of the driver ? Thank you in advance.
I have been building speakers for about 4 years now. I got the plate amplifier and subwofer for cheap and decided to try making a youtube video building the box for it.
Ten szpros poziomy tnie troche charakterystyke transmisij basu trzeba bylo tylko pionowe poziomy tnie w tym miejscu jest kumulacja akustyczna i ja rozcina na dwie fale i mniej efektowne brzmienie
Dee Brown I am from Slovenia (middle Europe). The shipping costs would probably be extremely high. I suggest you to ask on Parts Express forums, people there have a lot of knowledge about speaker building. Some of them are from California.
Dee Brown My advice is if you even THINK of making one yourself......buy the tools. Having the tools will allow you to make more projects in the future as your skills improve.
What brand of saw is that and where can I get one?!?!?! I'm referring to the first saw you're using that looks like a combination miter and table saw....
Using glue makes for a leakproof seal on the box. I use glue on the joints of cabinets with screws holding it together along with clamps till the glue dries. Set the screw heads slightly below the surface and fill in the screw heads as your filling the seams during finishing.
devroRR I bought them used from someome, but you can get them from audio stores like Parts Express in usa. In europe you have intertechnik and some other stores.
It was all fun and games, but then he should the inside.. insanely nice done
Nice work,
the housing is very stiff made and good quality.
I have the 250s4 in a 50 liters closed housing,
will do fb 34 hertz. it is placed in the middle of the longer wall to reduce modes.
For low bass i have Transmissionline with 4 meters.
look for visaton TL sub MK 2. Makes a lot of fun.
Can also be made from two w250s4 in a reduced square.
Vogel Hund m
What is the size of box
Super robota profesjonalna skrzynia pod bass uzebrowanie ok nie przenoszace drgan na obudowe super Pozdrawiam Adam Siwek z Polski Łódź
I can't believe it you did all this nicely and uou didn't paint or cover that box with something nice!
Late reply, but I finished the box about 3 months ago. Painted it matte white and it looks quite good.
a great work with well finishing
Too much bracing, all the 90° angles in the box will drop some dB's. The frequency wave traveles easier on smooth surfaces! A good tip if you want to make your enclosure more resistent would be thicker or double MDF
Nice build dude!
omg My Stoner Mind
Thank you very much :) I watched some of your videos and I wish i had the ability to speak in and edit my videos like that :P
My Stoner Mind hey buddy!
Wakffed. T
How’s your cats
That saw is fucking awesone
That saw is probably 15-20 years old and still working perfectly. It wasn't cheap but its quality made and a workhorse
excellent work dude! looks great. good to see some real craftsmanship on UA-cam
Wow, that's quite something. I do repair audio gear but never thought of building. Could I ask what kind of marking pen / pencil do you use on the MDF, please? Are you happy with it?
I used a normal graphite pencil HB hardness, nothing special.
Thanks for the reply, Luka! However, it seems to me at 00:00:52 you're using something fancier, like a technical pencil or something?
Lol a bit of topic but that's a cool saw, what brand is it
i like it
from where you got the amp.
Sir ,tell me the length and width of this box
Plzzzzz sir
Nice Work!!!:)
hi sir , thanks for video , please to tell me where purshase a similar , sub amplifier , thanks
can you explain the size of each part?
Lubie starania przy wykonywaniu tego typu prac powinienes jeszcze skosy transmisyjne wydechu basu wykonac ale jest super
Very good
What about the bass?. What score will you give when it is compared to other branded boxes?
Thomas Prince क
What if you dont have parameters of the woofer? In my case klipsch k27k with bic power amp plate and i want to make a build. What design should I follow?
It is best to measure the woofer parameters. Here is a guide using a pc with REW and a 100ohm resistor: www.roomeqwizard.com/help/help_en-GB/html/impedancemeasurement.html
@@lukaslapnik5839 thank you so much. Will try
We wonna see dase bump bro
Sound test ?
Hello.
I am planning to build a subwoofer too so i have a few questions if you don't mind.
What brand of amplifier did you use ?
Can you recommend a good sub amp ?
How come you chose a 4 ohm version of the driver ?
Thank you in advance.
The amplifier is no-name, rated at 150W 4ohm. If you go for a low powered subwoofer (
Can you give the measuremants of the box plz
Muy genial video amigo
Nice build! Where did you get the inspiration to the design?
I have been building speakers for about 4 years now. I got the plate amplifier and subwofer for cheap and decided to try making a youtube video building the box for it.
Do you have the layout for this ?
bro , i need dimension for making this box , help me
What about the sound test?
Exllnnt ...What type of amplifier is used here
Ten szpros poziomy tnie troche charakterystyke transmisij basu trzeba bylo tylko pionowe poziomy tnie w tym miejscu jest kumulacja akustyczna i ja rozcina na dwie fale i mniej efektowne brzmienie
Excellent build, what is the AMP capacity and demo.
what type of amp did you use, and where to buy it?
Hey please give detail and buying link which amp board you used
I don't have the tools to make one like this. Do you takes orders and if so how would you charge for a 10" subwoofer?
Dee Brown I have made some enclosures for my friends, usually only charged for the materials.
Ok. I'm in California. I'd be more than willing to pay you plus shipping
Dee Brown I am from Slovenia (middle Europe). The shipping costs would probably be extremely high. I suggest you to ask on Parts Express forums, people there have a lot of knowledge about speaker building. Some of them are from California.
Oh wow. Will do. Thx anyway
Dee Brown My advice is if you even THINK of making one yourself......buy the tools. Having the tools will allow you to make more projects in the future as your skills improve.
Good job bro
What is the title of the background music?
what was the reason behind that frame structure thing? it makes sound better or what
Good reinforcement while taking up minimal box volume.
May I ask the size of the box section I also want to try making .
Vloog 08071708 Box is 60 liters tuned to 35Hz
Giving mesurment bro
What brand of saw is that and where can I get one?!?!?! I'm referring to the first saw you're using that looks like a combination miter and table saw....
Well, there's Virutex TM33W, and then there's Ryubi RTMS1800-G.
can u plz provide measures of this box
What's the port area and length?
What is the Reason for using glue instead of nails.
to get a good airtight seal. you don't want air leaking everywhere.
Using glue makes for a leakproof seal on the box. I use glue on the joints of cabinets with screws holding it together along with clamps till the glue dries. Set the screw heads slightly below the surface and fill in the screw heads as your filling the seams during finishing.
hi where did you bought the parts i mean sub woofer and amplifier ?
devroRR I bought them used from someome, but you can get them from audio stores like Parts Express in usa. In europe you have intertechnik and some other stores.
Thanks a lot Luka
Any ideas on what kind of box to use for a velodyne spl series ii 8 inch sub
Can you tell dimension and measurements
what type of amp did you use, and where to buy it?
can you post an ebay link?
I bought the subwoofer and plate amp used. I don't really know where to get them. If you are from US try parts express.
nyc
where did you buy the plate amplifier?
Was there paint recession?
What is model name amplifier?
It has no labels so I think an unbranded chinese product. You cna get similar amplifiers from hypex or dayton audio but they are not cheap.
please, dear, make a film for its working, thanks nice vid....!! for better, you would smooth the internal corners ...
There is a test video I posted shortly after making it. Check my channel :)
Nice
Do you need a power supply for this build?
Its called an amp... and yes. Its in the box. Other than that you need a wall socket. So as long as you don't live under a rock you will have one.
hi I am med ine Indiasubwoofer very smart
yiu should have at least given the dimension. Or is it a secret,
Please provide us the dimensions. Thank you
Dimension please
tem como enviar o projeto da caixa amado em pdf livre
Nex 12inch
Pl amplifier board?
Music video ???
Measurements...
Dimensions plz
design please???
Do you need the dimensions? Unless you have the same subwoofer, this box probably won't be optimal for your driver.
not showing elect ckt
gooods
Muchos refuerzo para tan poco sub
Can you send me your project?
Que madera es esa
MDf
Y como se escucha ?
Me puedes decir como se llama el tema de fondo??????
Oh come on finish the product ,its a bare bone skeleton
this is car subwoofer?
Hi
The box is too long
Drawing plz
Pakyo..no layout for speakers..just the box
Mi amigo es mejor el Plywood de Pino Fenólico es mejor que ese otro en todo sentido
เสียงไทยไม่มีเหรอ
hello sir i have to start own bussnous so help me to stand up
great box , crap sub.
I don't think the sub is crap. The whole thing cost about 100 euro total and for the price I dont think you can get a comparable subwoofer.
Sggja
L h d kya
12345678
Shitty woofer, nice build.
OMG KOK OGLEDOV EJGA
Se kr nabere :P
Thanks for the waste of time. If you included planes you would got a thumbs up.
It is not a tutorial. The parts also arent available anymore. You can find other build guides on the internet using components that you can buy.
Shit!!!
When it test the sound like shit. That is way no demo on it.
Thanks for not explaining shit
It's called a build not a tutorial. Some info is in the description.
Nice
wich wood you use
Henk de steen use mdf wood cheap too
Hi