1969 Ford Mustang Jon Kaase Racing 520 Boss Nine 805hp Restomod Project

1969 Ford Mustang Jon Kaase Racing 520 Boss Nine 805hp Restomod Project
Engine:
★ 520ci Boss 9 built by Jon Kaase Racing
★ CNC Aluminum block and heads
★ 4.390-inch bore
★ 4.300-inch stroke
★ Scat forged Steel crank
★ Scat H-beam forged steel
★ 9.8:1 compression ratio
★ Diamond forged aluminum pistons
★ Comp Cams hydraulic roller 246/254-degree duration at 0.050, 0.607/0.607-inch lift on a 110 LSA, Comp retro-fit roller lifters
★ Kaase single-plane Boss 9 intake manifold modified for fuel injection by Wilson Manifolds
★ Kaase Boss 9 aluminum cylinder heads, 2.300-inch intake, 1.900-inch exhaust valves, WW Engineering rocker arms
★ Electromotive Engine Management tuned by Tom Nelson of Nelson Racing Engines
★ Custom external oiling system by Aviaid
★ Fabricated remote oil filter mount
★ Modified air cleaner with functional cowl induction cold air system
★ 805 hp
Exhaust:
★ Custom stainless steel headers and exhaust system by Resurrection by Mike
★ Spin Tech 3-inch stainless mufflers
Transmission:
★ Modern Driveline-prepared Tremec TKO 600 five-speed manual
★ Quick Time billet steel bellhousing, Kevlar clutch, custom aluminum driveshaft by Coast Driveline and Gear
Chassis:
★ Transmission crossmember fabricated to resemble the V-shaped crossbrace of the Maier rear suspension
★ JME subframe connectors modified to blend in with the rear frame modifications then fully welded to floorpans
★ Fabricated and integrated tie-down strap hooks into front suspension cradle and rear axle housing
Rearend:
★ Speedway Engineering prepared Ford 9-inch Grand National rear axle housing with full floater hubs and axles
Suspension:
★ Front:
JME Enterprises all aluminum cradle with F1-style, pushrod activated, in-board cantilever, coilover configuration, JME Enterprises all aluminum upper and lower A-arms and spindles, Flaming River adjustable electric power rack and pinion steering, JRI coilover shocks, Hyperco coil springs custom powdercoated to match interior color
★ Rear: Maier F1-style, pushrod activated, in-board cantilever, coilover configuration, Maier torque arm with inverted Watt's link system modified by Pure Vision, JRI coilover shocks, Hyperco coil springs custom powdercoated to match interior color
Wheels:
★ Front: Evod Industries custom billet, 18x9.5
★ Rear: Evod Industries custom billet, 19x12
Tires:
★ Front: Michelin Pilot Sport II, P275/35ZR18
★ Rear: Michelin Pilot Sport II, P345/30ZR19
Brakes:
★ Front: Baer disc, custom powdercoated 6S six-piston calipers, 14-inch rotors
★ Rear: Baer disc, custom powdercoated 6S six-piston calipers, 14-inch rotors
Interior:
★ Interior-Eric Thorsen Custom Upholstery; Redline Gauge Works instruments; Wilwood pedals; Momo steering wheel; Crow seatbelts; Fox Mustang map light; Soft LED courtesy lights in sail panels, roof rail, and underdash; Corbeau GTII seats; switch panel and cell phone storage area with 12V power port; midyear Corvette pull-style door levers; custom door panels; fabricated aluminum door pull straps wrapped in leather; stock-appearing billet aluminum window cranks by White Rhino; integrated rollcage; widened interior side panels; Shelby-style rear seat delete
Exterior:
★ Delta Tech headlights, custom heat extractor carbon-fiber hood, carbon-fiber front fenders, widened rear quarters, functional rear quarter-panel scoops/brake ducts, custom carbon-fiber rear spoiler, '68 Mustang taillights, vented rear filler panel, custom Anvil Auto gas cap, functional front brake ducts, frenched turn signal lamps, custom push-button hoodpins, carbon-fiber rear bumper, quarter-panel extensions and front spoiler
Built By:
Anvil Auto Inc.
www.anvilauto.com

[@Mark-ow6tw]

Absolutely spot on resto! Kaase Boss 9? Enough said.

[@rooster7658]

Absolutely incredible

[@antoniosilvafilho9550]

Show

[@jeancharlesrabaux5658]

Elle dechire

[@amazin1827]

Great video!.. on MUTE