The last charger you will ever need | ToolkitRC Q6AC
Вставка
- Опубліковано 12 лип 2024
- Support my work / pawelspychalski
The ToolkitRC Q6AC might be the last LiPo charger you will even need. And I mean it. The Q6AC is a real behemoth of a charger.
- 4 Channels, with full power of
- DC 1200W/AC 400W, Max 15A*4CH
- XT60/XT30 output compatible
- PD 65W fast charging
- Wireless charging
- USB-A fast charging 30W
If to find any downsides of this charger, it’s for sure, not a mobile one. But after all, either it has everything and then some more, or is small and light. This one is not small and not light for sure!
Q6AC was provided by www.toolkitrc.com/shop
0:00 The ToolkitRC Q6AC LiPo charger
0:26 Overview
1:05 Button and roller
2:14 4 batteries at once
3:31 Functions
4:09 The good and the bad
6:36 How loud ToolkitRC Q6AC is?
7:59 What is the ultimate charger then?
#fpvuniversity #toolkitrc @ToolkitrcChargers - Наука та технологія
![☀ Большой комбайн - больше мощности, больше удобства! [ToolkitRC Q6AC]](http://i.ytimg.com/vi/wxImZEnWJek/mqdefault.jpg)
![☀ Большой комбайн - больше мощности, больше удобства! [ToolkitRC Q6AC]](/img/tr.png)
"The last charger you will ever need"... Yeah... that's what I heard with the last chargers....
Their products are cheap quality... good features but have poor QA
Hi Pawel @FPVUniversity and thanks for another insightful review. You did not mention about the balance current being 800mA. That's half the one of a HOTA D6 Pro. On the paper, charging the same battery at the same current would make the Q6AC much slower. Did I miss something here? Thanks and keep up the great job!
Yes, it looks just like the Cybertruck. 😮
cybercharger
Fantastic review, Pawel! Thanks! 😃
That thing is gigantic!
Stay safe there with your family! 🖖😊
Anything ToolkitRC is the last thing I’ll ever want since the last one tried to blow up my Lipos.
Sorry man, but no amount of positive reviews will ever convince me to ever trust ToolkitRC again
I have a mix of ISDT, ToolkitRC, and hota chargers. I use the ToolkitRC M6D the most out of all of them. That was until the other day at least... I've never had any issues with their products but the other day I was charging a 6S 1,200 pack and when I realized it had been charging for longer than I expected, I took a look and noticed 5 out of the 6 cells were at 4.3 almost 4.4 volts. I've continued to use that charger under direct supervision and haven't had that issue again, but I'm scared to use it. I'll pass on Toolkit.
@@michaelkryszak5262 I’ve had the opposite happen, meaning my M4Q tried to charge 4S to 6S voltage, just out of the blue.
Luckily I caught it in time before it burned my house down, but it continued to do this on subsequent attempts, therefore I’ve thrown it out.
This clearly tells me there’s a clear lack of quality control and/or failure mode evaluation.
That lack has been well known on their hardware, but apparently same goes for software/firmware, making any endeavor with their products way more risky than it should be.
Needless to say ToolkitRC will never enter my house again.
More than 6S charging is one feature I'd really appreciate with chargers like this. I use 8S a lot (not for FPV multicopters, but larger fixed wing). It can be, for example, to add two 6S channels together to get one 12S channel (you'd need adapter cables or boards, but that's not a problem to put up with if you need such features). I would necessitate clever electronics design, but it can be done.
I fly everything with 1800mAh 4S packs (or multiples of those packs). With this charger I could parallel charge 4 packs per channel, so a total of 16 packs at once, charging at 2C current. That’s pretty impressive. But… man those parallel boards and packs would take up a ton of space on the bench, haha.
That thing is sweet!
yup, as long as you don't need 8S this thing got you covered
The Isdt K4 is smaller with the same output ratings AND supports 8s & 1.5A Balance current compared to 6s & 0.8 of the q6ac.. Does this make a huge difference in reality??
But it doesn't offer wireless charging and 65w pd, only 10w pd
Do you miss the cycle functionality? To charge and discharge a battery multiple times?
I have had serious problems with the Toolkit products I decided to buy (first the M6, a few years later the M7 and lastly M9)... their customer support is not good.. so you get what you pay for.
You probably DON'T get what you pay for as this thing is a staggering $200!
@@markitzero7408$200 🤯 100% agreed with you
Mine just arrived today ! 🎉 can charge 12 batts now along with turnigy quattro and M4Q charger. I think the Q6AC takes the pole position. Its just fantastic and also has QI charging, what more could somebody want? WiFi? No! Never leave ur batts unnatended. App connectivity would only encourage bad habits.
I'm just charging 8 lipos with Q6AC! As far as I'm concerned, pretty sweet charger. Happy flying!
How accurate and consistent is it?
I use ISTD Q6 NANO.
Cheap, can update firmware through USB, 6S and up to 200W charging, which is honestly a lot for such a tiny charger.
It was so good I just bought a second one instead of a bigger one.
At 12V it is only 100W but that is still more than enough charging speed.
same. That charger is impressive but for sure pretty expensive
@@dothgaerwenoakblossom15 34€ on Amazon? Anything less and I honestly wouldn't trust it on the safety side, you definitely don't want to skimp on safety for your charger.
Compare skyrc q200 neo do you have any idea
Once I learned about Balance Current, I stopped buying ToolKit chargers. Hota D6, 1600ma balance current vs 800ma.
*THIS*
sure, you can charge big packs at high amp rates, but if your charger only balances at ~500ma that charge is going to take a real long time to complete.
my charging suite consists of 4 ISDT P20 chargers (1.5A balancing current) with 4-way parallel boards on each port. each pair of chargers is fed by a single 1200W 24V PSU. I'll charge anywhere from 8 to 24 packs simultaneously to completion at 1C in about an hour.)
At 2:00 you say that the front channels are only for 6S. So you cannot charge a 4S lipo from the front channels?
No, you can charge anything below and including 6S. Just not 8S batteries or bigger
Since I have good quality 24VDC power supply (and I can get another if needed) I prefer DC input chargers. But 200 USD is ok for what it offers. But only if durability is not a problem.
does it have a power supply function?
No. It has USB out but not PSU, no
Ultra Power UP9
Only 200W but enough for me and 4 channels too. Less then half price of the ToolkitRC
the ultra power up9 has only 100W on ac. If that is enough for you thats good, but you are limited to 25W per output (if you use all four) which is only 1.12A on 4 6S batteries (MAX). I’m charging 3000mAh 4S LiIon packs at 1C 45W and that charger could only handle two of those. The above charger has 4 times the output on ac and 5 times the output on dc (one kilowatt!)
So if that is enough for you, fine. But power-wise it does not compare to this one.
Sorry for ranting.
@@dothgaerwenoakblossom15 You Are absolutely right. In my case i fly 3.5' drones and all my batteries are 550mah 6s tattu so I have enough power.
I forgot about 100W limit when on ac because I was never limited.
On fielld I use 3s 8000maah zee battery as power bank and can even fast charge my little 6s.
Up9 is budget friendly and fits my needs, that is why I happy with this charger but you are right. It's not for everybody.
Happy flying.
i personally modify my own chargers so that they are whisper silent (changing the fan to a noctua one)
my dream charger would be a Q4 charger with only 150-200W AC and a noctua fan! all those AC chargers are just too big and heavy! the ToolkitRC Q6AC beeing 1,2kg ..
i personally love the small ToolkitRC M6D with a 65w type c baseus charger and a type-c to xt-60 cable - really small and light package
charging 6S 1300mAh batteries i need about 30w per channel, so a quad charger with about 150w would be awesome!
edit: or something like the skyrc G630 Charging Hub would be incredible! with this the charger would charge one battery after the other on a "parellel board"!? too bad this system only works with a really bulky old charger ..
That would be nice!
you can't just change the fan to low rpm like noctua and expect the charger to have the same reliability
the noctua is quiet because it's low rpm but also low cfm compared to the stock fan so it will not have the same cooling performance
the charger would have to be designed for a low rpm/low cfm fan...or designed to use a bigger fan by having bigger heatsinks, more powerful power stages that do not get so hot etc
it's lame to have two 40mm fans in 2024, we have 2000w PC PSUs with 140mm fan that would be a lot quieter and even 1000w PSUs completely passive
Owned 2 toolkit chargers, NEVER AGAIN! They both went bad after 8 months! Straight up JUNK!
Looks good, but disappointing that the front two ports are XT60 only. They assured me for ages before release it would charge both types, but this is a poor design decision.
I also would prefer dual purpose ports. But well, That would probably make charger much bigger
Juz tydzień temu zamówiłem 😅
dobry wybór :)
Fit nice in a pocket lol
looks nice but dual 40mm fans, come on it's 2024....we have 2000w PSUs with just one 140mm fan or 1000w PSU completely passive....surely they could make a quiet one for 2 dollar more manufacturing costs
The dude review a battery charger without plugging more than 1 battery on the thing. Hope you got paid well for this commercial ;-)
Ah yes, you have to be the one who believes Nolan detonated a real nuclear bomb during filming of Oppenheimer.
My next charger will have a bluetooth or wifi connection to report charging status.
hmmm.... and a web server just in case ;)
Can't agree. No 8S support. No touchscreen.
OK, 8S is useful when you need 8S. On the touchscreen I can't agree. Buttons are nicer to use
than touchscreen
HaHaHa $200! WTF? An ISDT Q6 nano charges batteries just the same and can be had for $20 on sale. These 4 port chargers are WAY over priced.