Thanks for video I have it working on my radiomaster tx16s same screen as you, but without a map there's no way of knowing were the drone is only direction of travel, can this be overcome? Thanks again
Problem, models screen has no model names, there are as many selections as I have but names are blanked out, if I remove inav dirs I'm back to normal, when this this is running I can't see the model name I'm selecting, tried 1.7.2 and 1.6.0, bummer as far as the script goes it's perfect, but model selection screen unbearable.
@@KremerFPV This happens ONLY while the luascript is running, if I poweroff the T16 and poweron I can see models to under selection menu, if I rerun or select window with the iNav luascript, models go blank again.
@@fpvkabo Have the same issue, as soon as iNAV lua is running the other screens I have set up with Channel listings (Table lines), timers, trims, and Model lists all appear off white on white background, hence difficult to read , when original colour of these items was black. If I Cycle the power of TX, they return to normal colour. Did you ever find solution ?
Can you pelase tell me how to change the scale from metric to imperial. I have changed it in my transmitter but the lua script shows kph instead of MPH. Thank you
Hi thanks for the video, I got it working this far. The distance however stays on 0 meters no matter how far the plane is away. Because of that the arrow on the little map in the top right hand corner of the screen always stays in the middle. I would appreciate if anybody could help me. Thanks
I would like to use this Jumper T16 Pro model as a backup to my Spektrum DX18. Does it have 2 TIMERS? Will I have to learn a new set of commands or does the DSMX set of commands look anything like Spektrums?
So my setup is radiomaster tx16s, inav and crossfire, my inav lua looks great same as yours but while flying the craft heading- bearing is way off according to a compass. How do I fix this? Thanks
I selected the telemetry widget and I see it fine. If I want to add a new main view (long press tele, then page to add a new view) I can't select second screen view without telemetry I created. Could you help me? How I can select a second main view for example with other widget ?
How i can connect telemetry data to T16, if i bring telemetry information from plane to the ground by different radio system, not by tx-rx which controll plane? if i have second chanel uart only for telemetry? thanks
H Gal, can i check - will this work with a stanrd D16 Frysky receiver on a small drone? The drone is a DC3 with SucceX-D Mini F4 Stack + frysky D16 protocol cheers
I love the looks and pricing of this radio! Would be ideal upgrade from my flysky i6x. Hopefully it will be available again on banggood in some time, I wish I had the opportunity to be able to buy it.
Not sure it if will be available again on BG due to some business issues. You can but it from other vendors - links are in the description of the video.
@@KremerFPV Yeah sadly it won't be available anymore from banggood :/ I sent them email. And I can't buy it from gearbest either - same story. And about other vendors - I'm from europe so pretty much it's done deal for me . Guess I will go for taranis .
@@KremerFPV I'm pretty sure they don't have eu priority line like banggood has to not pay any taxes :( If I ordered it and customs would get hold of it I would certainly pay much more and at that point, it's just better to order taranis.
if I access the SD card with the t26 jumper, I can start the Inav luac file in the Script folder. but i can i get nothing when choosing widget as shown in this video at the beginning? maybe there is something wrong in the widget folder?
Hi, Thanks for the excellent video. Will this work for the iFlight Cinebee 4K with the Frsky Mini XM+ reciever? If so do I have to flash the the software to the controller? Thanks.
Thanks Sam. You need to make sure that the flight controller supports iNav and then flash it the way you update a firmware on BF (using the iNav software).
Gal Kremer I’ve been told that the Frsky Mini XM+ doesn’t support Telemetry, therefore I would imagine if that even if the Iflight FC supported iNav, I would not get the Telemetry anyways! Am I correct in making this assumption?
Gal Kremer No problem. I’m very new and “green” to the FPV Racing world and wanted to make sure that I understood how things worked. Thanks for getting back to me so quickly!
@@KremerFPV Hope this extra info will help. On v1.6.0 will works on Widget when start up. and V1.6.1 will not works on Widget but will be able exec from Script's folder.
The latest development branch of INAV Lua Telemetry should work with the T16. Instructions for installing the development build can be found here: github.com/iNavFlight/LuaTelemetry/wiki/Upgrade-to-Development-Build
With the F405 Wing F/C running INAV firmware you can hook a Frsky 8XR with out needing a Telemetry Adapter like for a Pixhawk F/C.
how do I change the speed from km/h to miles/hour?
Hallo Kremer i want to ask for what kind of R xsr firmware in this video.
un ivertert port connect to TX or RX ?
Hi, it's connected to the TX port of the FC. Not sure about the exact firmware but it was the stock one at the moment of shooting this video.
@@KremerFPV thank you so much for your kindness
how do you save the settings in the Lua script ? I tried holding down the scroll button but doesnt give me a option to save setings
Thanks for video I have it working on my radiomaster tx16s same screen as you, but without a map there's no way of knowing were the drone is only direction of travel, can this be overcome? Thanks again
hello how switch the screen of INAV between classic and pilot or other screen thank u
You can use the page button, if I understand you correctly.
Thanks again Gal. 😎
You're a tremendous value to us amd this hobby.
All the best to you. ✌🏼
Thank you very much, I appreciate it!
Problem, models screen has no model names, there are as many selections as I have but names are blanked out, if I remove inav dirs I'm back to
normal, when this this is running I can't see the model name I'm selecting, tried 1.7.2 and 1.6.0, bummer as far as the script goes it's perfect,
but model selection screen unbearable.
Weird. Did you report this issue to Jumper?
@@KremerFPV This happens ONLY while the luascript is running, if I poweroff the T16 and poweron I can see models to under selection menu, if I rerun or select window with the iNav luascript, models go blank again.
@@fpvkabo Have the same issue, as soon as iNAV lua is running the other screens I have set up with Channel listings (Table lines), timers, trims, and Model lists all appear off white on white background, hence difficult to read , when original colour of these items was black. If I Cycle the power of TX, they return to normal colour. Did you ever find solution ?
Can you pelase tell me how to change the scale from metric to imperial. I have changed it in my transmitter but the lua script shows kph instead of MPH. Thank you
The other units are ok? (Distance and etc.)
A map would be really cool
Hi thanks for the video,
I got it working this far. The distance however stays on 0 meters no matter how far the plane is away. Because of that the arrow on the little map in the top right hand corner of the screen always stays in the middle.
I would appreciate if anybody could help me.
Thanks
My pleasure. It sounds like the GPS telemetry is not working properly. Does the GPS data appear correctly on your OSD?
I would like to use this Jumper T16 Pro model as a backup to my Spektrum DX18. Does it have 2 TIMERS? Will I have to learn a new set of commands or does the DSMX set of commands look anything like Spektrums?
I think that the UI is pretty easy to use and it won't take you much time to get used to it. Yes - you can set two timers.
@@KremerFPV Thanks.
So my setup is radiomaster tx16s, inav and crossfire, my inav lua looks great same as yours but while flying the craft heading- bearing is way off according to a compass. How do I fix this? Thanks
Hi, did you figure it out?
I selected the telemetry widget and I see it fine. If I want to add a new main view (long press tele, then page to add a new view) I can't select second screen view without telemetry I created. Could you help me? How I can select a second main view for example with other widget ?
In the widget selection menu you can add / edit different screens.
@@KremerFPV thanks for the answer. Yes I can add a new screen but How I can switch to the new screen ?
This causes all my model names to disappear. Any idea?
Sorry but I didn't encounter this issue.
How i can connect telemetry data to T16, if i bring telemetry information from plane to the ground by different radio system, not by tx-rx which controll plane?
if i have second chanel uart only for telemetry?
thanks
You can connect another receiver which will only broadcast the telemetry back to the T16 if I understand you correctly.
when I chosse tbs screen all when black I try to return and Im no longer have the man looking the radio, can you help.
The TBS theme is not working for me too, but when you set it back to the classic theme it should work well.
H Gal, can i check - will this work with a stanrd D16 Frysky receiver on a small drone? The drone is a DC3 with SucceX-D Mini F4 Stack + frysky D16 protocol cheers
Hi Adam, sure - as long as the receiver supports telemetry it will work.
Is there anything similar for betaflight?
how dose this work with jumper R8 reciver it has RXTX pads insted of sport
As far as I know, the R8 is not compatible with iNav - only with APM.
Does this work with crossfire or only frsky?
As far as I know - no.
IT Works with both
Marco Zupancic nice 👍🏾
@@marcozupancic5348 thought only smartport is supported. Did you test it?
@@KremerFPV actually i didnt...but i bought one and IT says TBS Crossfire Support....
hello.I have maybe stupid question. I wish to know,if this is only for drones,or can be used for planes too.
That's not a stupid question :-)
Yes - you can use if for planes, boats and etc.
I love the looks and pricing of this radio! Would be ideal upgrade from my flysky i6x. Hopefully it will be available again on banggood in some time, I wish I had the opportunity to be able to buy it.
Not sure it if will be available again on BG due to some business issues. You can but it from other vendors - links are in the description of the video.
@@KremerFPV Yeah sadly it won't be available anymore from banggood :/ I sent them email. And I can't buy it from gearbest either - same story. And about other vendors - I'm from europe so pretty much it's done deal for me . Guess I will go for taranis .
@@fen1x_fpv Chevk Hobbycool
@@KremerFPV I'm pretty sure they don't have eu priority line like banggood has to not pay any taxes :( If I ordered it and customs would get hold of it I would certainly pay much more and at that point, it's just better to order taranis.
if I access the SD card with the t26 jumper, I can start the Inav luac file in the Script folder. but i can i get nothing when choosing widget as shown in this video at the beginning? maybe there is something wrong in the widget folder?
Hi,
Thanks for the excellent video.
Will this work for the iFlight Cinebee 4K with the Frsky Mini XM+ reciever?
If so do I have to flash the the software to the controller?
Thanks.
Thanks Sam. You need to make sure that the flight controller supports iNav and then flash it the way you update a firmware on BF (using the iNav software).
Gal Kremer
I’ve been told that the Frsky Mini XM+ doesn’t support Telemetry, therefore I would imagine if that even if the Iflight FC supported iNav, I would not get the Telemetry anyways! Am I correct in making this assumption?
@@samavella8831 Sorry - I didn't answer your question properly. You are correct - XM+ does not support telemetry.
Gal Kremer
No problem. I’m very new and “green” to the FPV Racing world and wanted to make sure that I understood how things worked.
Thanks for getting back to me so quickly!
This radio has been out for a week and the firmware is more advanced than my Nirvana which has been out for 6 months :`-(
What Flight Controller and Telemetry board were you using?
Frsky R-XSR Receiver and a HAKRC Flight controller.
Does this lua works with X9D plus?
Yes it does - check out the project page.
How many models can it hold?
A lot ;-)
That's really nice, Gal! 😃
It's a really great radio, hum? 😃
Super cool radio 😃 and great reviewer.
@@NunoFlyer Agreed! 😊
Thank you buddies :-)
Can this work on Ibus telemetry
It should work fine.
Hi will this lua scripte work with crossfire?
As far as I know - no.
@@KremerFPV is there any telemtry Lua script will works with xfire? Thank
I just tested the T16 with TBS on version 1.6.1 . all sensors detect amd works without any mod.
@@kenc4373 Thanks for letting me know
@@KremerFPV Hope this extra info will help. On v1.6.0 will works on Widget when start up. and V1.6.1 will not works on Widget but will be able exec from Script's folder.
Awesome radio.
Thanks for sharing my friend.
Have a nice weekend.
You too Nuno :-)
The latest development branch of INAV Lua Telemetry should work with the T16. Instructions for installing the development build can be found here:
github.com/iNavFlight/LuaTelemetry/wiki/Upgrade-to-Development-Build
Thank you Tim.
Why do we need iNav Telemetry?
Some need it, some don't.
videooooss, thumps uuuup, funny accent... thanks for your video. very helpful! :-)
Thanks, I guess ;-)
Gal Kremer subscribed! 😊