Setup Jumper T16 with Flight Simulator
Вставка
- Опубліковано 12 вер 2024
- I apologize for the soft audio. It happened when I uploaded to UA-cam. I have fixed that in my newer videos.
Setting up the Jumper T16 to use with a flight simulator is an awesome way to practice flying.
If you have not bought the Jumper T16 yet you can get on amazon here: amzn.to/2quPIie
Check out my other Jumper T16 videos by visiting my channel! / @builtfromhome9207
For anyone wondering this also worked perfectly fine with my Jumper T18.
Seriously, thank you for this. I was starting to think that my new Radiomaster TX16S wasn't going to work with DRL.
Only one who was able to help this problem for me thanks man!!
Thanks for the help. Can confirm it works with V2 radios.
I'm really grateful! I have the TX16S and I had to spent many days trying many methods! Tried installing SMT32 drivers and the famous VPC, also tried with ImpulseRC_Driver_Fixer and Zadig, but nothing worked! So, I was tired ans stressed so much, just as the first time that I tried to install an uncompatible modem driver in a Mandrake Linux distribution hahaha. But then I saw the video title and thought that maybe it could work, even though it was a Jumper T6, so I gave it a try as my last resort, I watched it and thought "it's toooo simple! that won't work on this model (I''ve tried to do something similar but instead of an input device I used a COM PORT and didn't work)", but surprise! It worked!!! THANK YOU!!!!!
OMG THANK YOU! I was struggling to get it working for a few hours. GREAT Video! THANKS AGAIN!
OH MY GOD... Thank you so so so much. I've been stuffing around with this for days.
Glad I can help out!!
My god, I've been messing with this thing for a while now. Had my old Qx7 working but my radiomaster wouldnt work. Thank you
Omg thank u so much for this video finally u came to teach us thank u very much. That's so cool I knew I can do the simulator but did not how now I know .
Thanks so much! This got my RadioMaster TX16S working with LiftOff and Steam.
Great I think u had another video where u thought us how to set it up and i did and it works thank u again
This video is a sanity saver. Thank you for making it!
I’m glad it helped out!!
Hah.. I didn't think to create a sim model with internal and external module turned off. Crossfire drain your battery really bad. I just turned it off manually. Good idea having a sim model 👍
Hey thanks! Glad you could take a tip from the video!
You are a freaking champ, thx a lot channelholder..
My T16S lives another day thx to you..
could not understand why it worked fine yeaterday first day with DRL and today it would not find my TX Radiomaster, but i seems my Book had made some updates, and that had reset that USB driver..
thx a lot.. your wife can give you a big kiss on the cheek and say its from me..you earn it.
At the end of the video, your stick movement is not being reflected correctly by the on screen sticks. When you for example drop throttle to zero, the throttle stick on screen never drops below centre stick. To get it to work correctly, you have to drop the weighting of each channel to 50% and add an offset of 50%. I had to do this to get full stick movement in some sims like liftoff and Next-sim. Happy simming:-)
Thanks for the tips! Im sure that comment will help others out!
Hi! I think I have this problem with my t16 and im not really sure how to fix it. Any help would be great
Zachary Florman Go to 2m 40s on this vid : ua-cam.com/video/UI1z2CoJpf8/v-deo.html
This was what I needed to see - thanks.
thanks for the explanation but it does not work with phoenix or RF simulators could you please help?
hasanen ahmed did you ever get it to work with jumper t16
THANK YOU. I was about to cry
Awesome, worked on my radiomaster t16,,,,,, woot
Thans a lot for your help
I am using the Freerider on my Android phone through OTG cable, but had no idea it is available on PC as well
How do you do it?
@@eitosj Download the sim from Play store and plug the transmitter through OTG cable/dongle and recognise it as a controller
Finally thank you for this video!!!! Also can you turn this transmitter into Mode 3?
If your transmitter is mode 1. Throttle on the right-hand side... yes you can. Otherwise it'll will require pulling your controller apart. RETA is the setting you want. On your controller or betaflight. I have velocidrone for my sim. You can go into controller setup and it will ask you for each individual axis. Basically it'll just ask you which one do you want to be throttle? And you just move the stick. Then it'll ask which one do you want to be yaw and you just move your stick etc . Hope this helps. 😉 I just noticed your comment was a month old you probably already have this sorted. 😂 have fun
Also yay mode 3😎 I think there must be like 6 of us now😂
I recently bought the taranis qx7s because I couldn't get a answer. Now that you tell me I will give my friend my taranis and by the jumper t16 since you replied. I'm still gonna say thank you because I could find this information you gave me anywhere. Thank you for your time and keep on flying!!!!😁
P.S. Mode 3 Gang
@@JediMcFly all good man... I'm not the guy who made the video. I'm just a guy who flys mode 3 with the jumper t16. Have fun man😎
How did you get to the computer screen prompt in first place? The screen is too small to see.
Many thanks.
Mine say " Deviation game Pad" not joistik ( i have a T8SG)...what does it means ..i am not able to calibrate on FMS simmulator. Any advice?
I haven't had luck with RF9. Most controls work except I can't map flight mode switch or reset.
My jumper t18pro just plugged in and worked on the pc as joystick
Would you share the FPV FreeRider simulator software?
Hello i have t12+ i made usb mode ask and i made a model that i turned of ext rf and int rf but when i plug my transmitter to pc it show up error that says your usb faulty thats why windows couldnt recognized usb .(i tried with another cable but the same thing happened again can uhelp me about it thanks)
I'm struggling to find the USB input driver. It doesn't show up in a list of drivers that I have. Suggestions? Also, my jumper shows up as two USB devices...
Thanks buddy you have a new sub!
Excellent. Thanks! :)
I watched the video and copied it, but the controls don't recognize and the two keys don't work.
Hi.. I am enjoying your videos but when you edit them just try to level up the audio, let the audio bars to hit the 0db mark. Thanks
Will do!! Thanks for the advice!
Hello!
Nice video!
I am having one problem when i connect to pc with usb joystick i can hear it being recognized but i don't see a icon in my computer file so i can do the rest of the setup.
Any solution's ?
man you are awesome!!!
When I plug in my usb cable, I just get device not recognised, nothing shows up. Any suggestion on a fix for this? It works fine flying my quad
Very good thank you 👍
Thank you!!
this is the ticket, thanks
Brilliant thank you
Thanks very much
How do i bind my T16 to my toy JJRC drones?
ever since i got the sd card reader problem and reformatted/rewrote the t16 file, i can't find better usb hs on my device manager
My computer dont recognise tx16s transmitter, any idea why? thank you
Same i set it to serial and now i can at least update firmware
When I connect my tx and go to controller my throttle axis stays in the middle. When I start a game the drone flies straight up then crashes. Non of my inputs work. What am I doing wrong. MacBook Pro
You are using a macbook
Why my t16 switch not working on simulator?
Ok have a question I did upgrade my radio with the USB-C and now I'm not getting my computer to recognize the radio when I choose to joy stick right after that nothing happens can anyone give me a hint thank u guys and Build from home.
2:19 if I wont remember it this time too.
When I connect it it says the device is not recognized. Do you know why this is?
Same here did you find some solution?
Hey how are u ok I did everything u did but there is something wrong with the sticks its like going on mode 1. Don't know why but I'll try everything again to see if I can fix it thank u.
This might be an issue with the way you setup your sim model. you might need to switch your channels around.
@@builtfromhome9207 yes thank u I'm going to change it well I'm going to watch one of ur videos where u did that I got to find it thank u so much men u really have a lots of knowledge on this matter so I'll follow u it's my first time dealing with this type of radios or any kind of transmitter I have the Radiolink T10 but trying to upgrade the firmware it did stop working lol I know t can be fix but that's going to be for another time now I want to deal with the jumper . Thank u.
Do I need special drivers or should they already be installed?
They should already be installed. Good luck!
Need a video of you playing the Sim
yea I should of added that. Just wanted to keep it quick and to the point.
it doesn't work. I don't have that option. My only option is to choose a mass storage device. an input device isn't an option.
There should be an option when setting up a model for USB, ASK Storage Joystick
Good video but speach volume is way too low. Can barely hear you talk with all volume settings to the max.
Yea I'm sorry about that. I did not know that youtube normalized my audio when uploaded. I have fixed that in my most recent video and I wont have that problem with any future video.
cant hear ya