🐝 Let's Build the (Almost) Perfect 3.5" DJI O3 CineWhoop
Вставка
- Опубліковано 7 вер 2024
- ► SpeedyBee Bee 35 Pro Frame: bit.ly/SB-BEE35 || s.click.aliexp...
► Motors: bit.ly/2006-SB || s.click.aliexp...
► Stack: www.speedybee.... || s.click.aliexp...
► Radio Receiver: s.click.aliexp...
► DJI O3 Air Unit: amzn.to/3szZwYR || bit.ly/iFlightO3
► Propellers: s.click.aliexp...
► Battery: s.click.aliexp...
Unfortunately the GPS unit didn't work well with this setup. I tried different ones and but none of them worked well.
In addition, I tried isolating the GPS wires however it did not help.
I am not sure what caused this problem and using the setup that is listed above installing a GPS is likely a waste of time and money.
Besides this issue this 3.5" CineWhoop is one of the best one that I've flown. It packs plenty of power, provides decent amount of flight time and most important - it flies incredibly well.
Happy flying!
🐝 Betaflight Diff File: drive.google.c...
🎵 Music: bit.ly/Audiio-
╔════╡My Gear╞═════════════════════╡
║ ► Goggles - FatShark HDO2 - bit.ly/HDO-2
║ ► RX Module - bit.ly/rapidFIRE
║ ► Radio Controller - Radiomaster TX16S: bit.ly/TX16S-MAX
║ ► Battery Charger - HOTA D6 Duo Pro: bit.ly/HOTA-D6...
║ ► Lipo Batteries: bit.ly/G-N-B
╚════════════════════════════════╡
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → bit.ly/subscrib...
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ I Really Appreciate Your Support!
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Find Me On Facebook:
► / kremerfpv
Instagram:
► / kremerfpv
Please consider supporting my channel by using my affiliated links:
* Banggood: bit.ly/BG-KREM...
* Caddx: bit.ly/CADDXFPV
* Flywoo: bit.ly/FLY-WOO
* iFlight: bit.ly/iFLight
* RadioMaster: bit.ly/Radio-M...
* RDQ: bit.ly/R-D-Q
* Rotor Riot: bit.ly/ROTOR-RIOT
It doesn't add any extra cost to you and will help me to grow my channel and bring you high quality updated content.
Thanks in advance!
#speedybee #DjiO3 #cinewhoop
Small correction - UART 1 - DJI O3, UART 4 - Bluetooth.
In addition, unfortunately the GPS unit didn't work well with this setup. I tried different ones and but none of them worked well.
In addition, I tried isolating the GPS wires however it did not help.
I am not sure what caused this problem and using the setup that is listed above installing a GPS is likely a waste of time and money.
Besides this issue this 3.5" CineWhoop is one of the best one that I've flown. It packs plenty of power, provides decent amount of flight time and most important - it flies incredibly well.
Happy flying!
On my Cinebot30, I placed the GEPRC M8 on the front where one would put the GoPro. It'll get more than 15 sats even on the ground floor of my house. Not using a GoPro since it is O3 so why not.
I had the CineLog35 but prefer the smaller Cinebot30. Maybe compare the Cinebot30 and the larger Flywoo 3.5"?
I used an older iflight m8q-5883 on my build and get a lock within a couple of minutes on the first flight of the day. No shielded wires or anything. I'm using a vista instead of an 03 though. Love this frame.
@@kurtzFPV which flight controller are you using?
@@velocistafpv Flywoo 3.5"? Unfortunately I don't have the Cinebot.
@@KremerFPV the speedybee f7 V2.
Great build video! I just built a bee35 myself a couple of weeks ago. I love it! didn't bother with GPS, although I really liked the GPS mount. It's disappointing to know that you weren't able to get GPS to work on it.
The frame is designed well and an absolute pleasure to build IMHO, especially if using an AIO FC.
Thanks for sharing your experience with us!!!
Thank you! Yes I hope to be able to figure out what's wrong with the GPS unit. I might use a full size one and see if it's working well. I am glad that I you loving this drone - it's definitely a keeper. Take care and happy holidays!
Hello Gal. Nice build, smooooth flyer. I've been thinking of building a Cinewhoop, this may be the one. I don't need a tiny one, I prefer the stability and flight time of a larger build. Awesome, can use a standard stack, I've got extras. Happy whooping everyone. 😎
A 30 x 30 stack is pretty tight. I ended up mounting the fc on the bottom and flipping the esc upside down on mine. It flies great though with a GoPro mini 11 and 5 bladed props. And it is as narrow as most 3" cinewhoops.
Thanks John! a 20mm stack fits with no issues - that's what I've used on my build. A full stack should be ok too, but it'll be a tight fit (depending on the VTX that you are going to use). Happy whooping!
Great review and build! It flies really well, almost no vibrations. Very impressive
Thank you!
Beautiful build, Gal! Amazing flying!!! 😃
Stay safe there with your family! 🖖😊
And happy holidays!
Thanks Mario, same to you!
Speedybee also asked me to review this one. It will arrive in a few days. Now that I saw your flights I’m looking forward to this build and also the flying. Will probably install an vista unit in it since I have so many of them and don’t wanna spend the cash on another o3 ;) greets, Mario
Yes it's a very nice drone. I normally just move my O3 units around between my drones - can't fly all of them, right?
Happy holidays Mario!
Very nice Quad!🐝
Thanks 👍
Hi! I understand that even though the motors are inverted - no additional tuning is required for the drone to fly properly, also no need to flip the stack?
nimble bee🚀🚀🚀
🚀🚀🚀
Great work, I would like to know if you had to Solder the O3 to the UART. If yes, did you connect all pins from O3 to UART?
Thanks. I usually don't use the radio receiver TX pin of the O3 unit as I am using other radio receivers instead.
Did you have Jello in your camera.. the TPU inserts that came with the bee35 frame kind of suck... If so how did you get rid of it?
Have you had any problems with the O3 showing vibrations in gyroflow? I have the same quad pretty much and mine is having a lot of vibrations in the recorded gyros, during flight in the googles there are none. I thought maybe the softmount may be the problem. What PWM frequency are you running in your ESC? Do you have any logs with gyro data to share to compare to mine? Thanks!
Hi, Im buying a similar setup. How powerful and agile does it feel in tight turns? also how are thos LIHV batteries performing? I hear they last a little shorter than Lipos?
Does the frame take a 30 X 30 stack? SpeedyBee F405 V4 BLS 55A 30x30 FC&ESC Stack
@@dronefilmsgermany yes but it will be a tight fit but has 30x30 25x25 and 20x20
Was your vtx plug and play or any soldering required
What pids you running are they a preset?
Could you give me the Dji O3 profile configuration for Giroflow?
It’s auto detected.
Hello
finally 😂😂😂
:-)
hi buddy, isnt uart 4 for bluetooth?
That's right - my mistake. UART 1 - O3, UART4 - Bluetooth.
I wouldn’t have said anything but it’s the whole idea with the Speedybee lol
@@andyd5321 no worries, thanks for letting me know I mislabeled the UARTs.
@@KremerFPV lol I’d say you owe me one? Just kidding, I do have an iflight Ih3 with a Speedybee f4 mini and vista build running crsf that Desyncs on me if you know what it might be? 4s dshot300, iv upped idle rpm to 7% but not tried it since, 2 test flights 2 identical roll outs backwards, in fairness the rear right prop was toast
Also black box shows spikes where rear right motor had considerably more input
I don't like the 03 myself.. can't see shit when darkens up out side.. FPV has lag.. that's a nice small build.. but you flew like a 5inch? Small birds for small gaps..
Thanks, will try to hit smaller gaps next time :-) BTW it's not that smaller than a 5" considering the propeller guards.
@@KremerFPV lol true.. small, bigg. All brake when missing a gap.. and breaks means Time.. personally I like the 4inch.. but 5 has that extra weight to through around.. so to speak.. all take better frames than those 3inch class come with I break those guards first 3 bats 😂😂 and putting out quality vids like you do takes time.. so I understand.. Merry Christmas my flying brother 👍👍👊👊