Це відео не доступне.
Перепрошуємо.
Creality CR-10 DIY Stand Alone KIT modification
Вставка
- Опубліковано 31 жов 2018
- I was tired of having my desk occupied by the control box of my 3d Creality cr10 printer. I found a guide with the material to print on the Thingiverse website. Thanks to the extraordinary work of the user "RICS 3D". I still have to finish some small details such as the slot for the micro-sd. Subscribe to the channel to support me!
-🛠Original Project Links: www.thingivers...
-Link Crealiy CR10 (In Promo): www.banggood.c...
-Link Creality CR10S (Promo): www.banggood.c...
-INSTAGRAM: www.instagram....
-Supports the channel!: www.paypal.com...
-My tin soldering iron: www.banggood.c...
-Third hand 6 arms: www.banggood.c...
-My Electric Heat Shrink Gun Power Tool Hot Air: www.banggood.c...
-To support me INSCRIVE to my channel! goo.gl/5XTh88
Great job rectifying a hideous design! Very helpful indeed!
I know this video is three years old but thank you! I am about to start printing these parts. -- Question.. What cable and why did you have to solder it?
Thank you. Gotta get rid of that dreaded box of pain.
Appreciate the video. Nice tunes too.
Just got a CR-10 last week. First 3D printer. Upgrading to 10S mainboard, then 2nd z-axis, filament detector and leveling sensor. Printing out an AIO kit.
Since I'm stripping the controller box, I need to print out four little cinder blocks, box atop, snap a pic.
How did it go? Post a video?
it worked great for a long time. now there is no more.
@@cosmochannelvideo Did you upgrade? If so to what?
Interesting upgrade.. Interesting watch… (Listening on the other hand….Sigh)
Mute was my friend…
Can you share the link to the screws you use, please? I want the screw heads flush with the printed surfaces for the aesthetics. Thank you!
Edit: I just found links in another comment, disregard my request, lol.
would it be possible with the length of the stock wiring to move the mainboard to the front for easy access? using octoprint, so probably don't need the sd card at all now and this is awesome!
Ciao. Penso di si ma non ci metto la mano sul fuco ;-)
Cosmo Channel grazie, sembra facile da fare e ben fatto. molto più facile seguire questo video con i sottotitoli in inglese.
Does it affect the maximum printable height, mounting the spool holder in the fashion that you have?
By mounting it like this, you lose about 6 inches in height... I never mould objects taller than 10/15cm...
Can those mods, be good even for the CR10 V2? Should be almost the same of CR10
Thanks for the video, it helps a lot. Just wonder if you have a list which parts used from the original RISCS 3D project, as there are quite a few options. I have an original CR-10, and would like to print out just the correct parts. Thanks.
Hi, there. I'll put you the link to download everything you need for an original printer cr 10. These pieces are the ones I printed myself. The media for the feeder ne year printed 2 . Once printed the feet put a rubber strip to prevent it from moving while printing. If you haven't done so yet, sign up for the channel! THANK YOU! drive.google.com/open?id=1ARNoFFGuVCYsJqYZEUJgcDEzEz8hBQQN
@@cosmochannelvideo Hi, thanks for your quick reply. One more question, do you need to buy extra cables other than the originals? I subscribed to your channel already. Thanks.
@@user-up9bg1ym7b Hi, there. I used the original cables without adding extensions. You just need screws and bolts. I bought these. www.banggood.com/custlink/GmmmDqJJr4 and www.banggood.com/custlink/G3GmmUCJWf of various sizes. Thank you for signing up!
@@cosmochannelvideo Thanks for your great help.
@@user-up9bg1ym7b Please! If you have any more questions, please do so!
very good stand alone ;)
i know this may be a long shot do think could adapted for the Hictop D3 hero plus becasue its basically the same.
Could you detail how you put your filament spool holder on your z axis? I like that placement and want to do that for mine. Looks like you used the stock holder and just moved it off the control box, but how did you secure it?
Hi, there. I simply removed the support that was installed on the box and through 2 nut m4 inserted in the structure I screwed it in that position. I'm sending you more photos to make you better understand. I forgot! Subscribe to the channel if you haven't done so yet! Thank you! drive.google.com/open?id=1REBfKCQL1vLrkxoI1_2HPgywp320bZcc
Fantatic! You have vibration problem?
no problem of vibrations!
A ok grazie mille
That music, good god it's awful! Another video I need to mute in order to watch...cool mods though.
You're right. If I was talking about the old videos I was making, I would turn the music volume too high! If you look at my last videos, the music is much lower and in the last one it's really absent!
People complain about everything these days, just deal with the music and shut up!
What material did you use? Would PLA+ be durable enough for these upgrades? Or even PLA?
Subscribed!! Thank you, Does this mod require the cable extension kit?
Also is that a fan on your y axis motor?
Hello and thank you for subscribing! I didn't use cable extensions but I used the original ones. On the stepper I inserted a fan because in my case it was very hot after hours of printing. The other steppers, on the other hand, do not heat up very much .. Keep following me!
wonder if it works for the CR10 V2
is this compatible with the cr-10 mini?
where do you get the metal bracket for the fan?
Not sure how good all these crazy vibrations could be for the box, feels like components are going to desolder themselves
Hello. I assure you that no component has unsoldered or detached .. I have been molding for a year and a half with hours and hours of printing and it has never stopped ...
thank you
i whold use old computercase and stick it underneath printer utlise fans
sounds good!
What bolts did you use?
I wish you showed how to do the wiring ind eliminate the use of the gx16 4 pin connector to make.
I am wanting to do this but you seem to be the only one to do the standalone build.
You don't show how you connected all the wiring. I'm not risking this without understanding the wiring put together unless you have it documented.
Thanks for your video!
Not to sure how I feel about the exposed power supply posts there someone touches those and its curtains
the terminal block is hidden in the lower part and however it takes little to cover it like a piece of plastic glued...
Looks good. What do you mounted on top?
Hello! This is a smoke sensor. When I print at night I can sleep relaxed 😁
you have link for the SD extension?
Interesting mod for sure... Only concern is the heat. Have you had any issues after this mod?
I will have printed for 2000 hours after this mod and never a problem. The longest print I did was 19 hours and everything went well.
@@cosmochannelvideo Thank you for the feedback. Im tempted to give this a try. Only minor change will be to include the raspberry pi.
Perfect. As soon as you let me know how it works.
Do you know if any of these mods void warranty? Thanks for the video too!
+Cesar Chap Hello! this type of mod certainly undermines the warranty . My printer was no longer under warranty. Remember to subscribe to my channel! Thanks a lot!
What warranty lol?
@@2awesome292 🤣 It is better to never need the guarantee
What warranty?
were did you get the ribben cable for the screen I need one the same length
I bought the cable at amazon. Here is the link: amzn.to/2SFz0pN
@@cosmochannelvideo hello, which one is this on the US Amazon site?
Will this work on a CR-10S
I think it can be done ..
good god that cable management looks like a nightmare
can I use that mod in cr10 mini ?
Sicuramente devi modificare i supporti.. ma credo sia fattibile
Ciao cosmo, ottimo video! Anche io sono in procinto di trasformare la mia cr-10s come la tua.. ho bisogno solo di un aiuto.. hai uno schema per i collegamenti? Non vorrei sbagliare a collegare qualcosa... grazie!!
Ciao Mattia. Non ho uno schema elettrico. Io prima di staccare tutto ho fatto molte foto (oltre al video) ai connettori e ho scritto tutto.
Cosmo Channel si è quello che farò anche io! In più mi studierò il tuo video... ma hai dovuto allungare qualche cablaggio o hai utilizzato quelli originali?
Non ho allungato i cavi ma ho usato quelli che c'erano prima. Se hai qualche domanda chiedi pure!
Muy say ne no no we do do si de me we bu doo
Is this still viable for the V3?
It also appears you added some other mods than just the Rics control box deletion. What other mods did you make?
why the music?
mistakes of youth.
Why not mirror it and put power supply on right side and the cables should all reach?
In my opinion it is feasible. As you said, just mirror the pieces before printing them. Thanks for the comment. If you have not done so yet, subscribe to the channel!
What parts exactly would you mirror? All of them without a single exception?
the question is not clear to me
@@cosmochannelvideo I think lapidations was wanting to know is, Do you mirror just the power supply bracket? OR mirror all objects being printed for underneath the printer bed?
@@tritt1771 If you want to put the electronics on the left you have to mirror only the holder for the motherboard. The power supply can be placed further ahead, making room for the motherboard.
Nice :) (y)
Too much exposed electrical for me.
Still nice job though.
Looking at doing this to my CR10s but needing a little help with translating. The inventables files that I got are in what look to be German and there are several different files for the mainboard and a couple other components. can you offer any help for the files that I need to print for a Stock CR10s?
I also noticed that you didn't use the stock power plug and switch. could you include a link to where you got that as well
Hi. I used these files: drive.google.com/drive/folders/15-b3ZHyYcKeRyVrAypc0QXvKJbGFsMVN?usp=sharing
220V/110V 5A Power Outlet Socket:
www.banggood.com/custlink/GK3306I04F
I don't want my air cooled technical parts near the heat bed.
Out of curiosity, I checked my printer. No fan blows air on the heated plate. I've been using it for months now and I haven't noticed any problem heating the plate.
LOL well dont do the mod then nobodies forcing you!!! :D :D
Still looks quite messy though with all the cables.
I don't find it very messy.
putting music instead of voice explanation was just awful. please next time use your voice. the whole video is almost useless because of that.
A ma sei italiano?
Si!
@@cosmochannelvideo wow🔝, ma è difficile questa cosa da fare?
Per me è stato facilissimo.. dipende da quanta manualità hai..
@@cosmochannelvideo tanta hahaha
Allora buttati in questa avventura! Proprio oggi ho finito una stampa di 18 ore e mezza con quella stampante.. mai avuto problemi!