Dyson dc40 dc50 no suction full deep cleaning, filters, bin and more how to clean a Dyson
Вставка
- Опубліковано 5 вер 2024
- In this episode we do a full deep cleaning on a Dyson ball dc40 and dc50 animal
I show you how to take apart and fix a Dyson dc40 dc50 with no suction or a blockage or other problems.
Dyson filter location and cleaning.
get new filters here along with spare parts.paid link
amzn.to/2LTqC7H
#dysonvacuum
#dysondc50
I've had 2 dysons, both stop working after a few years and Dyson doesn't want to know. Thanks for videos like this saves people buying another expensive vacuum.
You get a five year warranty on Dyson uprights so it's odd that they didn't want to know.
Thank you! I took mine apart and cleaned all the filters etc (ran the motor/ball one under the tap and that worked just fine). Having waited a couple of days for the parts to dry, I’ve just reassembled. I plugged it in and it started with a roar! I thought I’d broken it, but it settled and now the suction is so strong it was sticking to the wooden flooring. A new lease of life! Brilliant.
I was getting so stressed I couldn't get my front plate on the head back on. Found your video and you saved me. Thank you!
The hard part for me was opening the inside filter casing.... I went back to this video three times and did notice he had difficulty too, so I kept at it and FINALLY got it open. The filming got better later on but I had a hard time seeing what he was holding at first cause he was below the camera view. But other then that it was very helpful. Why do they have to make this wonderful vacuum SO hard to deep clean? sheesh
It was especially funny to me when I first heard someone from the UK call it a Hoover. I live in North Canton, Ohio, the home of the Hoover Company. (The high school teams are call the Hoover Vikings!). I bought Hoover sweepers for most of my life. They didn’t last long. Then, I bought a Dyson over ten years ago. It’s worked wonderfully all this time until a few days ago. I’m looking for clogs, as the motor is still going strong.
Easily as clean as a 'Brand New one' .
A large bottle brush is good for cleaning the long Flxi Pipe too.
Well done mate.
Also pop a fibre air freshener pad by the Hepa filter for added Fresh Fragrance .
😎👍
Thanks for the video, we found it very useful. I have the animal dc40 like this one plus 1 in yellow and they both had stopped picking up properly. Driving me crazy not being able to clean properly and didn't want to be buying any new ones during lockdown. Thumbs up!
I found this same one in the trash last week cleaned it out man its really good the one i found was much cleaner inside very dirty outside but had a cat smell cleaned it up nice glad i did its a really good vacuum and i have all kinds never one of these
My reasoning for taking apart was more about smell than suction. The previous owner must have at some point sucked up water or submerged the cyclone for cleaning. If this is you, here is why. The inside gasket is made of neoprene. Go sweat in your sandals and smell them...or wear a wetsuit for a day. That's exactly what hit my nose when using the Dyson DC40.
Vinegar
Thanks for posting this... the small ball was playing up... works like a dream now!
Glad it helped
Great video. I needed the deep clean of the cyclone
glad I could help you out.
The lower filter can also be rinsed with water to clean, let dry and then replace.
Thanks a lot I fixed my vac
Well done stripping the Cyclone Chamber.. a lot if people wont go that far.
That is where a lot of the 'nasty hoover smell' comes from . 👍👍👍
Very informative, but also a great advertisement for buying a BAGGED model. I have a Dyson, as well as a pair of LG bagless units (large house), and they’re such a pain to clean with all the miscellaneous filters. I’d rather insert a bag, fill it, toss it.
Thanks for your tutorial, helado me a lot, saludos desde Tijuana, México
Thank you really helpful
Awe really needed to watch this as mine needs doing but half the footage we needed to see is off camera 😔
I just found a dyson on the side of the street too 😂
Really helpful. Thanks!
Disassembling the dust bin deeply was the hardest part and also the part the video didn't show. He just said "there are some screws here, here, and here..."
there deep in there and hard to see
You're marvelous, thank you for this.
No. I ended up buying the ball 2. Also seems like it’s running hot to me.
This helped me so much!
Great vid - but would have liked to seen you disassemble the cyclone part.
I did, I took it all to bits.
Mine is still broken 😢
Cleaned filters, taken apart and cleaned, new changeover valve fitted, new brush bar.
Zero suction still,
You should have spoken softly and put ASMR in the title. Would have gotten thousands of views
😆
Thank you so much.
I watched a few videos about removing the screen, but I could never see where they stick the screwdriver. Wish there was a closeup
Hi there, could you do a video how you took all the parts off to clean the dyson? It would be great! X
It worked! Thank you!!!
Good video. Nice one.
Best video, but what size star key for the cyclone screw, please would be very much appreciated 😊
t6 from what I remember
@@FINDITFIXITRESTOREITBUILDIT Thank you so much! 😁👍
It was a T8 and a T10 will be required
What I want to know is if open up the ball with special screwdriver which i don't have whether I can get all the debris out easier that way rather than poking it out...
Taking it apart was straight forward but the reassemble wasn't shown on the video.
Im struggling to put the cyclone back together. The spring and red lever has me miffed.
Any help gratefully accepted.
how do i get the hair out of the bit between the two rollers on the brush bar please?
There’s a normal screw in one side, unscrew that then you can just pull the brush bar out and clean it.
did you find that in the trash I found adyson
I find all my dysons in the trash and use them to film videos on.
It was you the stole my hover.
😂
I have the days on ball vacuumed,I took it apart and cleaned it,but the hose has no suction,I took it all off no clogs,not sure I can send you pics
make sure the valve at the back bottom of the ball/hose is closing when you take the hose. there is a pipe/valve that moves when you pull the hose off to divert suction to the hose.
if you get some suction from the hose but seems blocked there is a section to remove to unblock it on the back next to the valve. hope this helps
Didn’t show us how to get to the screws on the cyclone or you’re showing us is it stripped down what good is that
So much for the Dyson claim of "No Loss Of Suction"
Any vacuum that needs to have pre and post filters will eventually suffer from clogged filters.
That's because most people don't treat them properly. i.e. don't wash the filters regularly and often overfill past the maxfill line.
@@walruspolish You only have to use th8e cleaner once, for the filter to cause the cleaner to lose a degree of performance. It may not be immediately noticeable to a user without some way of scientifically measuring the performance, but as the filter filters out dust, it will clog Iover time, so "no liss of suction is a spurious claim.
@@hermanmunster3358 hence washing the filters / emptying the bin within the manufacturer spec to maintain performance. Using it once would reduce the performance by an indeterminate amount. Any vacuum needs maintenance.
after cleaning my Dyson it still has an asful animal smell. It son givin to us by people that had 2 dogs. Any suggestions on how to get that smell out?
get new filters for it and a special order remover air freshener like fabrezz and give it a good soaking and let it dry should do the trick.
Did the hoover work in the end? 🙂
yes perfect thanks sold it for £50 😋
Small point but this is a ‘Dyson’ not a ‘Hoover’
Why call a Dyson a Hoover ?
‘hoover’ is commonly a generic term for a vacuum cleaner, regardless of the brand and even though there is a hoover brand - or you can say you’re going to do the hoovering or hoover the lounge etc.
I might just be stupid but I can't figure out how to recline this thing. 😂
Can I wet the filter so I can clean it out
yes it is washable.
That’s actually a small ball known as a DC50 lol
Did he just call the Dyson a Hoover???
That's what they call vacuum cleaners over there. Hoovers
I have no suction to the head
Did you fix it?
Off screen 😢
all i saw was your head
you stole that
You don’t even show how you took everything apart!
If you can't figure it out from this video then you shouldn't pick up a screwdriver imo
@@MrHukd I wouldn’t be watching a video if I could lol
I'm all for a good bargain babe but you don't know who had that vacuum. what if they threw that out cause their cat had fleas and vacuumed the house and said "it ain't worth it I'll buy a new one" now you just brought that problem into your home. 🤢
I just deep cleaned MY OWN dyson DC41 and I can tell you right now I ain't cleaning a random person's vacuum out like that!
🤣🤣🤣 lucky it was ok but I get what you mean.
well, some of us really like exploring problems and that is definitely one you can run into. I once scored a nice carpet for an apartment rental and the tenants called to say it was flea infested, so yes, you do need to be cautious, but be glad there are some of us who really find dirty jobs to be a challenge!
@@eslteacherspix I've got a good video coming out this week clearing a horders house not cleaned for 30 years.
It's a DC50 not a DC40
it’s a 40
@@jashuanyedu7033 50
my DC40 doesn't look like this one.
idk if mines dc40 or 50 or what but i have a small ball allergy and cant seem to think how am i gonna clean the head see through part properly? urs has buttons to take cover off mine doesnt. i have taken the roller out and still thats not enough. i know the 2 filters and that but just this front of the head part is bugging me as i know not to use water because its motorized. any help please i tried searching and couldnt find a video. but this is my second video i see u do. edit: when i mean roller i meant the sleeve. also since day one i like to mention i never use the pipe. the suction on that well its hardly there for some reason and its new and ive tried to find whats wrong and nothing is. its just crap. but the head normal sucking is great.