Hi there... while waiting for the delivery of the TDC 2.0, I watched some videos on its installation and all videos from your site. One guy on YT was saying that if you want to decrease the hop up, sometimes the nub doesn't retract fully (=until touching the bottom of the adjustment screw). And the issue seems to be that the nub fits too tightly into the insert piece. He was saying that even after decreasing the hop up, the same hop up force (or almost) was applied to the BBs. His fix was to trim the nub with a file, so that it's still a good fit (but it's not loose by any means), so that it needs "a little bit" of force to move it inside the insert. The bucking has the role to actually push back the nub (if I'm getting the things right), but if the nub is too tight, then the bucking doesn't have enough force to press the nub fully, right? In one of your videos, you're addressing exactly this issue, and saying that it's by design to snugly fit. And that if the wheel is adjusted to decrease the hop up while it happens that the nub doesn't come back by itself, the next BB will push back the nub (and one shot after decreasing the hop up is lost, but this is not the main issue). I'm tough wondering if the BB will push it where it really needs to be, or it pushes it only like 80% in the right position, or pushing it at an angle, and still some unwanted hop up is applied - like if I take apart the chamber, I may further press it with the finger, which is not ok. This makes things a bit chaotic, while the exact purpose is to have precision. Could you please develop on this situation? Should the nub be a snug fit into its place in the insert, or should be slightly loose? Thank you and sorry for the long comment.
Any word on when one will be availible for the SSG96? Im assuming it'll be a fairly straightforward case of replacing the grub screw in the standard TDC with a thumb screw one?
Action Army chamber requires all new parts that are specifically made for it. Arm, nubs, different length screw and hole is located in slightly different place. The one part you can reuse is the Pro clicker upgrade but you will most likely need to relocate it.
Greetings from South Africa! Do you ship these to South Africa? I will get this 100% because i saw a review and it says the normal ssg 10 hop up is easy to accidentally change it. And another question is instead of the dust cover for the safety can you make something to put it somewhere else because again i saw a review and it says when you pull the bolt it goes to safe. Thank You
Yes, we ship to South Africa ;) And regarding the safety, it's probably gonna be hard to put it else where. You could try to just shorten the safety switch so it's lower profile instead of removing it entirely.
Hey, do you think the ssg10 is worth the hype it gets, and also worthy of the hate it gets too? Also is your company really centered around upgrade parts for Novritsch guns? Thanks, and great video!
@@anomalyp8584 just novritsch hate in general. if you have ever visited a subreddit where novritsch guns are mentioned, people say they are trash, that Christoph is a con, that all his products are not pre-upgraded and are just rebranded guns from other companies
Yes, no and yes. I think any smallest issue gets blown out and gets a ton of hate but when Silverback got some issues with scratchy cylinder on the SRS A2, people were going "ah, yes no biggie, just sand it a bit". I think the SSG10 is best bought on black friday for 229€ - then it's just an out of this world performamce for the price. We make some upgrade parts and mostly for Novritsch guns - TDC 2.0 is an absolute must have in my opinion for any SSG10/24.
Looks really cool but I see you used an ssg10 in this video. Does that mean that this fits in the stock ssg10 chamber or do I need the other one for that?
This is made for the Action Army chamber which fits most VSR10's (and since SSG10 is based on VSR10, that chamber fits fine) but I would not suggest to upgrade - SSG10 TDC 2.0 is gonna perform the same.
@@Mrcrieds TDC does improve range slighly just because you can adjust the hopup to the perfect trajectory but there will not be a difference in performance between stock SSG10 with TDC 2.0 installed, or SSG10 with AA chamber and TDC 2.0.
@@Mrcrieds Yes, usually it solves any issues with stock hopup chamber in terms of hopup. It's really the best / only mod you NEED for SSG10 to get amazing performance.
has anyone tried to fit this into a Barrett Fieldcraft (which mor eor less ought to be compatible ti VSR10 hopup wise...) together with the AA chamber? Have one with a hpa conversion an the hopup manipulation/adj. is def. the weak spot here
Hi I want to get this TDC 2.0 pro. Stupid question do i need to buy that red chamber too or the stock one works fine? I have an SSG10 A2 Again sorry for the stupid question, i am really new to this hobby
@@TRIDOS.DESIGN Hi thanks for you fast answer. My chamber broke(the stock one ) and i wanted to upgrade it.... so either i buy the same + your TDC 2.0 or what else do you recommend + your TDC 2.0 ;P also you are out of stock completely. When can you restock again please?
The hole is off by 0.3mm so some slight adjustments might be needed or just to reposition your PRO unit. However - I would strongly advise to not make the switch unless you have some other issues with the gun. The performance will be exactly the same.
Hello, wondering if anyone could help me understand what it does? Alot of people recommend it however I am a little stupid and don't really understand what it is or what it does to the gun. Thanks
@@TRIDOS.DESIGN Hi, thank you for reply, I have figured out the problem, it fits for ssg10 very well, here comes another problem, the hole on the hopup lever is slightly smaller than the screw on the rotary knob, so I drilled and widened it, Now it fits well but I dont know if it’s gonna leads to any injuries to the whole system. BTW, I didn’t expect your reply this soon at the beginning XD thank you again
@people5177 the hole on the plastic arm is smaller by design. On instructions page this is explained. This is what gives main resistance for the screw, so it would not turn by itself. It should not affect the system otherwise.
With TDC installed, performance is pretty much identical regardless of the hopup chamber. This has been confirmed also by some member in the community who had a side by side comparison with different hopup chambers all with our TDC 2.0
@@TRIDOS.DESIGN I need this Since I change springs and bb weight when playing. Outdoors and cqb... So clics are useful to do quick adjustments between configs... You just learn the amount of clicks for each one... Well if you need someone to test it out count with me!
Haha... I think you want to check out the reviews on the website. Each and every one of those is from actual customers 😅. And no, you can get anything close to this for 10$ ;)
3 nubs, the adjuster and clicker with all the tools to easily install with out screw ups vs a cheap 3D printed version... Yeah I think I'll go with the TDC 2.0
So he should just give out his product for free? LOL. His company isn't microsoft or google so of course that he can sell it by which any price. If you think you can do it better do it, the market price will adjust
I cannot believe how thorough this video was. He is very proud of his product as he should be. This was well thought out.
Thank you for the kind words!
I like that you include a jog for drilling the hole in the outer barrel. Talk about thinking ahead! Good job!!!
iv just ordered an ssg10, cant wait for this thing to come back into stock, already got a few mods planned lol
Hi there... while waiting for the delivery of the TDC 2.0, I watched some videos on its installation and all videos from your site. One guy on YT was saying that if you want to decrease the hop up, sometimes the nub doesn't retract fully (=until touching the bottom of the adjustment screw). And the issue seems to be that the nub fits too tightly into the insert piece. He was saying that even after decreasing the hop up, the same hop up force (or almost) was applied to the BBs. His fix was to trim the nub with a file, so that it's still a good fit (but it's not loose by any means), so that it needs "a little bit" of force to move it inside the insert. The bucking has the role to actually push back the nub (if I'm getting the things right), but if the nub is too tight, then the bucking doesn't have enough force to press the nub fully, right?
In one of your videos, you're addressing exactly this issue, and saying that it's by design to snugly fit. And that if the wheel is adjusted to decrease the hop up while it happens that the nub doesn't come back by itself, the next BB will push back the nub (and one shot after decreasing the hop up is lost, but this is not the main issue). I'm tough wondering if the BB will push it where it really needs to be, or it pushes it only like 80% in the right position, or pushing it at an angle, and still some unwanted hop up is applied - like if I take apart the chamber, I may further press it with the finger, which is not ok. This makes things a bit chaotic, while the exact purpose is to have precision.
Could you please develop on this situation? Should the nub be a snug fit into its place in the insert, or should be slightly loose?
Thank you and sorry for the long comment.
The answer, yes! Absolutely the best I’ve seen. Will be on any future builds
Got one ordered for my Action Army T11. I bought the Action Army hop up unit too. Can't wait to get them installed.
🙏🏻🙏🏻thank you ! Ordered👊been waiting for this one ☝️
Just fitted one. Awesome design. Thank you. Super speedy
Delivery too
Quick question sorry if it sounds silly but you have to remove the original adjustment screw to make this unit work
I have this installed in my SSG 10 it works flawless it's high quality and precision made
How tough the installation process? I gave one coming and I hope i can get it done myself.
You can check the instructions on our shop. It's dead simple and you can't screw it up if you follow it step by step. A 10 year old could do it.
I just bought one for my jg bar-10! Super excited to give it a try!
Now that's awsome having a step by step page on how to install a tdc. 👍👍
Great video, I love the detail. I just ordered one and I have high hopes!
Great vid. Obviously very popular as out of stock everywhere I’ve looked. Will be getting one when back in stock. 👍
Thanks for these dude this is awesome! I searched for something like this the other day and just my luck these were released.
About to order one for my Bolt-M AAC T10. gun is perfect expect for making hopup adjustments. cant wait to try this out
Thank you for this! Amazing news for airsoft!
I wanted to know if I needed to remove the adjustment screw in my action army hopup in order for your unit to work
Hey
It’s perfect !!!!
But I have a SSG 96 …. Coming son? I hope so🤙🏻
Any word on when one will be availible for the SSG96? Im assuming it'll be a fairly straightforward case of replacing the grub screw in the standard TDC with a thumb screw one?
I neeeeeeed this perfect tool for my ssg 96 pls 🙏
Add this video to the install guide side.
Great hardware.
Regards
Just order i was extremely impressed with how it look on the video
Thanks man! Really trying to push all aspects of it including our video production! 😎
@@TRIDOS.DESIGN yea I'm a airsoft sniper store owner in the u.s.a so I may end up wanting to stock this item 😉
I already have a 2.0 in my SSG10, will that work with an AA hop? Or is the arm different? The nubs in the ssg10 2.0 kit look different
cheers
Action Army chamber requires all new parts that are specifically made for it. Arm, nubs, different length screw and hole is located in slightly different place. The one part you can reuse is the Pro clicker upgrade but you will most likely need to relocate it.
I wanted to know do I remove the adjustment screw from my action army hopup unit to allow the tdc to function properly
I believe you can leave it in without any issues, but I would suggest removing it so it doesn't rattle inside the chamber.
Hi, quiq question, I've another type of insert, where can I find the one for the action army?
Greetings from South Africa! Do you ship these to South Africa? I will get this 100% because i saw a review and it says the normal ssg 10 hop up is easy to accidentally change it. And another question is instead of the dust cover for the safety can you make something to put it somewhere else because again i saw a review and it says when you pull the bolt it goes to safe. Thank You
Yes, we ship to South Africa ;) And regarding the safety, it's probably gonna be hard to put it else where. You could try to just shorten the safety switch so it's lower profile instead of removing it entirely.
@@TRIDOS.DESIGN Ok Thank you!
When will this be back in stock?
When will they be in stock
looks cool
Quick question, how did you get the aa arm out? Thank you!
Check the instructional video on the TDC 2.0. You hammer it out by resting on the included drill jig.
Nice video. Does this work on Cyma CM701 (M24) ? Thanks
No, the M24 platform is not compatible.
I bought the Tdc Pro kit and a AA Hop up chamber, but know everything is here and it doesn’t fit. (The Hop up Arm into the chamber)
Get in touch with us over at Facebook please if you still have the issue.
Hey, do you think the ssg10 is worth the hype it gets, and also worthy of the hate it gets too? Also is your company really centered around upgrade parts for Novritsch guns? Thanks, and great video!
what hate does it get?
@@anomalyp8584 just novritsch hate in general. if you have ever visited a subreddit where novritsch guns are mentioned, people say they are trash, that Christoph is a con, that all his products are not pre-upgraded and are just rebranded guns from other companies
Yes, no and yes. I think any smallest issue gets blown out and gets a ton of hate but when Silverback got some issues with scratchy cylinder on the SRS A2, people were going "ah, yes no biggie, just sand it a bit". I think the SSG10 is best bought on black friday for 229€ - then it's just an out of this world performamce for the price. We make some upgrade parts and mostly for Novritsch guns - TDC 2.0 is an absolute must have in my opinion for any SSG10/24.
good solution!!!
Genius!
Have you considered doing this for the ssg96? :)
Yes, we are making one for SSG96 ;)
Looks really cool but I see you used an ssg10 in this video. Does that mean that this fits in the stock ssg10 chamber or do I need the other one for that?
This is made for the Action Army chamber which fits most VSR10's (and since SSG10 is based on VSR10, that chamber fits fine) but I would not suggest to upgrade - SSG10 TDC 2.0 is gonna perform the same.
@@TRIDOS.DESIGN so this will not increase range on standart ssg10
@@Mrcrieds TDC does improve range slighly just because you can adjust the hopup to the perfect trajectory but there will not be a difference in performance between stock SSG10 with TDC 2.0 installed, or SSG10 with AA chamber and TDC 2.0.
@@TRIDOS.DESIGN what if my stock Hopup dosent work well/dosent lift bbs will the TDC help ?
@@Mrcrieds Yes, usually it solves any issues with stock hopup chamber in terms of hopup. It's really the best / only mod you NEED for SSG10 to get amazing performance.
has anyone tried to fit this into a Barrett Fieldcraft (which mor eor less ought to be compatible ti VSR10 hopup wise...) together with the AA chamber?
Have one with a hpa conversion an the hopup manipulation/adj. is def. the weak spot here
What chamber/unit you recommend for the ssg10, have the standard bucking and chamber etc.. Have the TDC mod done last week
I use stock SSG10 chamber with TDC 2.0. I've changed my bucking to X-range one. Rest is stock.
@@TRIDOS.DESIGN can you send link of the bucking? I'm from Belgium. Kind regards
Just search for x-range on Google ;) it will be on the first page. We have it on TRIDOS DESIGN as well.
@@TRIDOS.DESIGN will buy the x range hop up, what degrees u recommend? 55?
It depends from your rifle power. Please check the table in product description on our shop.
Hi I want to get this TDC 2.0 pro. Stupid question do i need to buy that red chamber too or the stock one works fine? I have an SSG10 A2
Again sorry for the stupid question, i am really new to this hobby
There is also a version made for stock SSG10 chamber - just make sure to select the correct one on our website.
@@TRIDOS.DESIGN Hi thanks for you fast answer. My chamber broke(the stock one ) and i wanted to upgrade it.... so either i buy the same + your TDC 2.0 or what else do you recommend + your TDC 2.0 ;P
also you are out of stock completely. When can you restock again please?
All our TDC 2.0's are currently in stock. The performance will be the same between using stock chamber + TDC 2.0 or Action Army + TDC 2.0.
Do I need the action army hop chamber ? Or can I use the stock ssg10-A3 chamber ?
We have version for both Action Army and SSG10 stock - make sure to choose the correct one on shop because they are not intercompatible.
@@TRIDOS.DESIGN thank you and now I will order one . After watching this video 📹 thank you
Very nice built
Can this be used without the AA hop unit as I have stock SSG10 hop unit
We have different versions of this system for different chambers. We have one for stock SSG10 aswell - just make sure you pick the right one.
If I have a Pro version installed for the stock SSG10, would I need to drill a new hole if I wanted to buy and use this version?
The hole is off by 0.3mm so some slight adjustments might be needed or just to reposition your PRO unit. However - I would strongly advise to not make the switch unless you have some other issues with the gun. The performance will be exactly the same.
"Mike was here."..... love it lmao... those who know are true snipers xD
Hehe... 😎
Hello, wondering if anyone could help me understand what it does? Alot of people recommend it however I am a little stupid and don't really understand what it is or what it does to the gun.
Thanks
Check out the product page - it's pretty well explained there.
I got the TOKYO MARUI VSR10 Gspec. I wonder if this TDC 2.0 works or fit to my gun?
If you have / get the red Action Army chamber, yes, it should be perfectly compatible ;)
@@TRIDOS.DESIGN THANK YOU. YOUR THE BEST!
Does the TM one work with the cyma VSR?
Yes, it should fit with little to no modifications on stock clone chambers.
Is tic 2.0 kits fit for original ssg10 hop unit?mine doesn’t fits well
We have an SSG10 specific version for the TDC 2.0. This one was made specifically for the Action Army chamber.
@@TRIDOS.DESIGN Hi, thank you for reply, I have figured out the problem, it fits for ssg10 very well, here comes another problem, the hole on the hopup lever is slightly smaller than the screw on the rotary knob, so I drilled and widened it, Now it fits well but I dont know if it’s gonna leads to any injuries to the whole system. BTW, I didn’t expect your reply this soon at the beginning XD thank you again
@people5177 the hole on the plastic arm is smaller by design. On instructions page this is explained. This is what gives main resistance for the screw, so it would not turn by itself. It should not affect the system otherwise.
hi, i have a queston, is tridos tdc pro compatible with a classic army m24?
No, its not compatible unfortunately.
@@TRIDOS.DESIGN but my m24 have action army hop up chamber
We don't have a version that is compatible with M24 action army chamber
Does it work with the stock hop up mechanism of the SSG? (or it needs the Action Army one)? Thanks.
We have a dedicated version for SSG10 and SSG24 chambers too.
@@TRIDOS.DESIGN -- thanks for the quick reply. So the same TDC 2.0 unit would not work on the stock SSG10 chamber *and* the Action Army one?
Correct. Otherwise we wouldn't have made it 😅. It different in every way - nut, insert, nubs...
@@TRIDOS.DESIGN -- got you .. ok, thanks for the quick answers.
Can be usted in a t10 ¿? Is a vsr plataform. Im really interested in this tdc
Yup, should work just fine. I'm pretty sure we had some T10 testers during BETA testing and we had no problems.
@@TRIDOS.DESIGN nice!! I just ordered my pro version!! 🤟🏻🤟🏻
Which Hopup is the best with the Tdc?
With TDC installed, performance is pretty much identical regardless of the hopup chamber. This has been confirmed also by some member in the community who had a side by side comparison with different hopup chambers all with our TDC 2.0
Will this work on a JG Bar 10? Also do you ship to U.S.??
If you use the Action Army chamber, it will work, yes. And yes, we ship world wide ;)
@@TRIDOS.DESIGN awesome hopefully it comes back in stock soon.
I want to buy the screw alone. I went and lost it .... :(
All parts are available for purchase as spare parts. They can be found under Products -> Spare Parts.
@@TRIDOS.DESIGN thanks! I found it.
This is nice and all but your forgetting something...
WHERE IS THE SSG96 VERSION!?
Haha.. it's in the works. It needs to be redesigned for it completely again - this VSR10 version took around 5-6 months of tweaking and perfecting.
@@TRIDOS.DESIGN I need this Since I change springs and bb weight when playing. Outdoors and cqb... So clics are useful to do quick adjustments between configs... You just learn the amount of clicks for each one...
Well if you need someone to test it out count with me!
Make sure you join our FB group - we are recruiting any beta testers from there.
Pro Version is ordered
I never liked tdc mods, cos they always look like a bottlecap glued to your outer barrel, this on the other hand,, looks class
Heck yeah. This was one of the main things that bothered us as well!
@@TRIDOS.DESIGN youve done a great job, im definitely gonna get one
U should do podcasts like novritsch
Это лучший TDC для любой винтовки
send to Brazil?
Yup.
@@TRIDOS.DESIGN just place an order through the website?
Yup.
thas what i need hehehe
Sorry forgot already asked but it's been bothering me
Just lol. Who in their mind would spend 50€ for this garbage. Any airspft 3D printing company will print it for you for like 10 bucks
Haha... I think you want to check out the reviews on the website. Each and every one of those is from actual customers 😅. And no, you can get anything close to this for 10$ ;)
3 nubs, the adjuster and clicker with all the tools to easily install with out screw ups vs a cheap 3D printed version... Yeah I think I'll go with the TDC 2.0
So he should just give out his product for free? LOL. His company isn't microsoft or google so of course that he can sell it by which any price. If you think you can do it better do it, the market price will adjust