Just bought my first sniper (t10 stnd) and never opened or worked on an airsoft RIF before and this video is amazing. Thank you. So straight forward and informative.
Thank you for posting this vid, I have just upgraded my T10 with the very same hop. I'm not 100% happy with the results. But I'm pretty sure that is down to my inexperience.
The T10 is a very under rated vsr10 . Can be made really quiet and pretty wallet friendly as piston ,spring guide ,spring and flamingo can give wicked results - tridos have just brought a mod out to stop that pesky double feed . Nice job and good to see the T10 getting some love ❤👍👍
The T10 solid base for upgrades. I have SCW piston, Maple Leaf autobot with Omega nub, AA chamber, AA 6.01 430mm and with AA M170 it was shooting 4j. Had to cut it down to be within 3j limit. Time will tell how long the stock trigger will last.
I've used a T11 (same internals) for 2-3 years now and after changing the piston and the spring to get it up to 2.3J it worked fine for a year or so but it did start slam firing as the metal used for the trigger sear is really soft (aluminium i think) and it wore down quickly. I then traced and cut a new trigger sear out of some steal and filed it down so that it would seat properly and sanded down contact surfaces down smooth and it has been working perfectly ever since.
Near the end of your video where you covered the end of the barrel and fired it and had pressure until you removed your thumb, should this be the case on all vsr10 and clones? I have an ASG M40a3. I’m new to airsoft. Bought the gun second hand and apparently had a precision 6.02 barrel fitted with a pid rubber. I’ve put my thumb over the barrel and it did t hold pressure. I’m guessing this will reduce the guns power?
Hey, awesome video! Just wondering which barrel spacers you used from Action Army. I’ve found two options - B01-008 and B01-012. Can’t figure out which one to go with for my T10.
Is there a reason you didn't put the hop adjustment lever thing back on? I bought one of these second hand, and it had pretty much identical upgrades, it also doesn't have the hop adjust lever after they upgraded to the same hop chamber... I wondered if there is a reason, or if it's a mistake. Mine shoots terribly, and I figured I need to adjust the hop, but I wasn't able to 😅😅
I like the upgrade videos...People need that
Thanks buddy, when things settle down I plan to do more :)
Love my T10. Great feeling bit of kit.
I like the T10, I think you get a lot of bang for your back and they feel great :)
Just bought my first sniper (t10 stnd) and never opened or worked on an airsoft RIF before and this video is amazing. Thank you. So straight forward and informative.
Thanks very much buddy! Glad it was helpful :)
@@SniperMechanics I've also used your updated mk23 vid and recommendations to do my ASG Mk23 so figures crossed I've done it correctly!!
Got one of these and love it. Keep up the quality work!
Thanks, will do!
Thank you for posting this vid, I have just upgraded my T10 with the very same hop. I'm not 100% happy with the results. But I'm pretty sure that is down to my inexperience.
Glad I could help!
very nice might have to pick one of these up
The T10 is a very under rated vsr10 .
Can be made really quiet and pretty wallet friendly as piston ,spring guide ,spring and flamingo can give wicked results - tridos have just brought a mod out to stop that pesky double feed .
Nice job and good to see the T10 getting some love ❤👍👍
Yer the T10 really is a good platform and can absolutely be turned into a beast
Would love a video walk through of all ur rifles
Awesome video and thanks very much for the info , well put together
Thanks very much buddy!
Great vid, thank you 👍🏼
Glad you liked it!
Thank you!
The T10 solid base for upgrades. I have SCW piston, Maple Leaf autobot with Omega nub, AA chamber, AA 6.01 430mm and with AA M170 it was shooting 4j. Had to cut it down to be within 3j limit. Time will tell how long the stock trigger will last.
I think trigger will last a fair while, when/if it goes grab a NaMech trigger or SCW
I've used a T11 (same internals) for 2-3 years now and after changing the piston and the spring to get it up to 2.3J it worked fine for a year or so but it did start slam firing as the metal used for the trigger sear is really soft (aluminium i think) and it wore down quickly. I then traced and cut a new trigger sear out of some steal and filed it down so that it would seat properly and sanded down contact surfaces down smooth and it has been working perfectly ever since.
Great video ! Does the Tridos 2.0 work with the standard grey hop up chamber ?
Yer Tridos does an adjuster for normal chambers and also the AA
Near the end of your video where you covered the end of the barrel and fired it and had pressure until you removed your thumb, should this be the case on all vsr10 and clones?
I have an ASG M40a3. I’m new to airsoft. Bought the gun second hand and apparently had a precision 6.02 barrel fitted with a pid rubber. I’ve put my thumb over the barrel and it did t hold pressure. I’m guessing this will reduce the guns power?
It will make it not conaistent, yes you should have the seal deffenitely!
Very Nice vídeo. Learned a lot. Just a question the origin hopup dont come with a nub... Do you recommend to add One?
The original hop arm has the nub built in :)
@@SniperMechanics understood. Tks for the quick reply
Hello mate, just got your wasp piston for my VSR. What sleeve and air break do you recommend for a 2.32J build?
Hey buddy, it entirely depends on the build and all the other parts used etc. However a good starting point is mid brake and mid sleeve :)
@@SniperMechanics I've got 330 on 0.45 with correct hop! lovely. cheers mate.
Hey, awesome video! Just wondering which barrel spacers you used from Action Army. I’ve found two options - B01-008 and B01-012. Can’t figure out which one to go with for my T10.
B01-012
Thank you🙌🏻
Sniper Mechanic can I send my Maple Leaf VSR-10 to you and you build it?
Does this need a tridos tdc? Or is it good wothout, bearing mind ill be buyinf the preupgraded versuon from empire
Good without it :)
Where can I find all these parts? I've just got myself a t10
Empire Airsoft
Is there a reason you didn't put the hop adjustment lever thing back on?
I bought one of these second hand, and it had pretty much identical upgrades, it also doesn't have the hop adjust lever after they upgraded to the same hop chamber... I wondered if there is a reason, or if it's a mistake.
Mine shoots terribly, and I figured I need to adjust the hop, but I wasn't able to 😅😅
The AA chamber adjusts via the mag well, there's a small screw you adjust
@@SniperMechanics Thank you, I will take a look 🫰
Can you use the same parts for the t10 on the t11
Yes buddy :)
@@SniperMechanics thanks for the response thats my next build then I think
Where do i get all the bits to do this
Why are all ssg10 wasp pistons out of stock everywhere
Empire airsoft have them and I think a few EU stores have got some on the way, as they were just restocked
Why not use your own barrel?