The wires on the other side check the colors on the wire inside the switch box so you should have three wires for the turn signal one will be hot and the other two will be left and right. For the headlight and low beam and high beam you will haveone hot wire that'll be always connected to your low beam wire and then you need a switch so you can connect the high beam wire.there is two wires that are connected together for the high-beam because one goes to the high beam light indicator and the other goes to the high beam light bulb
@@maestroscustomsgregorygara7624 Very good of you to reply, thanks. I use my bike every day for work, but am seriously thinking of doing some proper modification to it - especially the ugly fenders!! Cheers from Barcelona :)
I've got the same digital speedometer as your previous video. Can I connect the positive wirre from there and connect it to the positive on this startup switch?
So I couldn't comment on the you did on my other video. But I use the high heat and then the gloss black epoxy with the 2K clear. That'll give you that deep black
@@maestroscustomsgregorygara7624 my bad bro , I deleted the comment becuase I didn't want to hit you with too many questions. So I should connect the speedo positive wire to the blue/white and red and black wire? Gloss on top of gloss epoxy hell yea! Your technique comes out SUPER clean. Im going to try that with some vht epoxy
Hi man! Need some help here. If I do the same thing what you did here I’ll need to do some wiering on the other side to? Or by just doing what you did in the video will work. Thanks . I hope I explained well lol
Maestros Customs Gregory Garay yeah man I installed some 7/8 clipon bars and a single cable throttle and I need to relocate the start switch to loose the bigass control unit that I wasn’t able to fit to the bars even with some spacers. It kept moving when accelerating. Thanks for the help bro!
@@vladfaur3442 just another idea that I did was when I bought the clip-on bars they came 7/8 inch. So what I did was I bought bicycle seat postsand it is 7/8 in in the tip and the rest of the bar is 1 in. Now everything will fit perfect!
Just started following you. Excellent videos brother.
Thank you for educated video Maestro.I will do it this week and text back.
Brah I gotta pay a visit for this tutorial haha. I love how you transform the 650 vstar
Good video man..i have follow all the intruction that u given..regard from borneo island
Do more how to videos!! Or parts breakdowns on where you get stuff!!
Such great content! Thanks for everything!
You've really been an inspiration during my build. Thank you sir 🙏
Just what i needed to know. Thank you. Mahalo from Hawaii. I had 1 wrong wire on my botton. U solved my problem. Be Blessed
Well done more movies, greetings from Poland
Great Video,well explained 💯 Thanks
This is great! Looking to do this. Did you have to switch your fuse, to a bigger fuse?
I got er wired up and she turns over but doesnt seem to want to start now?
I need help with doing my own stater solenoid please
What about running lights / tag light? I got brakes on the foot but just no running lights now
This great, thanks for the video. But what do you usually do for the switchgear on the other side?
The wires on the other side check the colors on the wire inside the switch box so you should have three wires for the turn signal one will be hot and the other two will be left and right. For the headlight and low beam and high beam you will haveone hot wire that'll be always connected to your low beam wire and then you need a switch so you can connect the high beam wire.there is two wires that are connected together for the high-beam because one goes to the high beam light indicator and the other goes to the high beam light bulb
@@maestroscustomsgregorygara7624 Very good of you to reply, thanks. I use my bike every day for work, but am seriously thinking of doing some proper modification to it - especially the ugly fenders!!
Cheers from Barcelona :)
What did you do for the kill switch
I've got the same digital speedometer as your previous video. Can I connect the positive wirre from there and connect it to the positive on this startup switch?
Connect the positive to the yellow and red wire?
No bro. Ones for the switch and the other is for the speedo. The yellow is the starter wire
So I couldn't comment on the you did on my other video. But I use the high heat and then the gloss black epoxy with the 2K clear. That'll give you that deep black
@@maestroscustomsgregorygara7624 my bad bro , I deleted the comment becuase I didn't want to hit you with too many questions. So I should connect the speedo positive wire to the blue/white and red and black wire? Gloss on top of gloss epoxy hell yea! Your technique comes out SUPER clean. Im going to try that with some vht epoxy
@@maestroscustomsgregorygara7624
Here's the aero that I'm working on that you 100% inspired ua-cam.com/video/1J8Jp1WLCOI/v-deo.html
Hi man! Need some help here. If I do the same thing what you did here I’ll need to do some wiering on the other side to? Or by just doing what you did in the video will work. Thanks . I hope I explained well lol
So if you just want the starter switchthen yes this is all you have to do and you don't have to do nothing on the other side.
Maestros Customs Gregory Garay yeah man I installed some 7/8 clipon bars and a single cable throttle and I need to relocate the start switch to loose the bigass control unit that I wasn’t able to fit to the bars even with some spacers. It kept moving when accelerating.
Thanks for the help bro!
@@vladfaur3442 just another idea that I did was when I bought the clip-on bars they came 7/8 inch. So what I did was I bought bicycle seat postsand it is 7/8 in in the tip and the rest of the bar is 1 in. Now everything will fit perfect!
Maestros Customs Gregory Garay Damn! If I’d knew that before would of saved me from a lotof trouble lol I changed everything to 7/8
@@vladfaur3442 that sucks but now you know. I give you props on figuring out how to change everything out though.