The EASIEST wiring to start an old carbureted engine! Push button start/ ignition bypass
Вставка
- Опубліковано 30 бер 2020
- This is the most minimal wiring you will need to start an old motor with an HEI distributor. This should help if you have no harness, are making an engine stand, have a bad ignition, need to start an old car with no key or want to add push button start to your classic vehicle. Here is the basic idea..
To set up the battery to your engine you will need: Positive terminal - big stud on starter
Negative Terminal - grounded to motor
To turn the ignition on/off you will need: power line - switch - BAT spade on the distributor
To crank the engine you will need: power line - button - small stud on the starter
For whatever reason I couldn’t find a video to explain how to bypass the ignition, or to convert it to a switch, to start the engine. It took me a bit to figure it out, hopefully someone finds this useful
3 years later and you're helping a fellar start up a 65 riv, Thank you for the help!!
Thank you so much for this video I now know exactly what I need to know to run all this for my mud truck
So easy when explaining slowly for us older ones.cheers, thanks.
Thank you! Finally a brief yet detailed video on how to do this. Great job!
Even after 2 years your still helping us out thank you so much!!!
Dude. Thank you so much for this video. Can’t wait to try this when I get home. Dude explained where every wire goes !! Thanks again! You should start making more videos !
I appreciate it! I think about it sometimes with all of the toys and projects I have but I never seem to pick up the camera lol. Might just start filming more in the future
@@eazyduzit5309 come on man. Pick that camera up. You’re an inspiration !
Is there an easy way to wire lights in and signals as well? I don’t need dash or anything else just my headlights and taillights
@@DoesUrBeanHang yes how to wire your street rod from start to finish its orange book woth a 30s car drawn on the cover its a little book its how I learned it has comics and pics that make it easy and simplified pretty much need a fused light switch to the lights lights grounded and switch grounded to the body the book is on ebay
Omg thank you! I'm building a square body with a 4 speed. It had nothing for wiring in it. You saved me a ton of bs!
THANK YOU SO MUCH!! I plan to start an engine on a cradle...Been looking for a video to explain this for a LONG TIME great video! To tha point👍🏾
I am getting ready to do exactly what you did, looked it up and found your vid. Well done brother.
Helped me out a lot just pulled a 80’s 305 into the yard motor looked good hopefully I better started before the day is over really appreciate the video
Im doing now started push button on my yj jeep n your video helps a lot thank you so much for details very nicely
Thank you for the video. I am trouble shooting and needed a reminder on how to hook up the basics. This was perfect! Well done!
Just bought an old car and this helped me! Thanks a lot
thank you so much im having to rewire a entire 64 dynamic 88 and it has been a pain.with this info now i can finish rewiring!
This is so damn perfect. Couldn’t find a video anywhere. The wiring on my camaro is a mess. I will be doing this to remedy the ignition problems.
This was good to find, thanks for this video, I am doing a frame off resto, on a 66 Chevelle, and the motor is installed on the frame, but I have no harness at all, and I want to do a start up, it has been a lot of years since I have done anything like this, this is a good quick tutorial , and to refresh my memory. and I want to get this 283 running and ironed out before the body marries back onto the frame, and it is a new re-built 283,
You have definitely shown guaranteed facts that you are the only one with the simple startup there is no one else on here and I'll search for weeks 👍
I appreciate it!
@@eazyduzit5309 no I appreciate you 💯
Dude I love your video this was the best one I seen so far... For my 74 nova
exactly what i needed- thanks man!
Thank you!!!! Finally goona have the old hunting truck starting on its own again!
Thank you for making this video I've tested several junkyard motors
This is the most helpful video yet l, thank you for this.
Thank you, now I know what to do with my miller 200le aead welder that I've been struggling with for days and hopefully I can get back to work
OK ok. Thanks that’s basic. Well put video my friend ,very informative.
Awesome vid bro much needed just bought a 64 c10 and wanted to see if motor is good and this was the perfect way to test without ignition switch
Great job, i was looking for this so i can build a engine stand. This is perfect thanks
Exactly what I was looking for.
Thanks man - my tilt column and all my ignition took a poop - this helped me
Good info exactly what I needed. Gonna build me a custom switch pod for my Camaro
I've been looking forever for a simple test stand wiring video. Thank-you. I have a msd dist. With a 6al box. Just need to figure out how that ties into the mix lol
Currently in the same boat with a msd 6a box. Did you figute it out ?
Dude this really helped me I’m definitely doing this tomorrow
Thanks for sharing this.. Good luck w/ your project
Thanks for your help very clear.
This will help me. Thank you
Bro..Thank you so much for this video!
Preparing to Wire up a triumph stag with a 4.2l v6 wish me luck many thanks for the vid👍👍
Bro you saved me 😅 .. thanks for the good info 👍🏾
Thank you been looking for this for awhile
Dude hell yea I’m running a Ford motor in a derby car and this helped out🤟🏻🤟🏻Chevrolet is easier but I’m rebuilding my 350 atm so I’m running a 302!
Yea man thanks, you definitely helped me out. can't wait to try this
Appreciate the wiring detail,
Matey been looking for video like this so much
Yeah man so glad you shared this!
exactly what I needed!
Awesome! Thanks for this 👍
Bro this was super helpful thanks
Very detailed information. Thank you 🙏
I successfully fired up my engine today following your instruction. 🙏
a great helpful video🌊actual useful video to be on youtube
Used this to use my 350 on a stand
You dropped this btw 👉👑
That’s what I learned this from! Old timer down the road from me built a engine stand and used this setup, that’s where I got it from!
Thanks for this video bro. It can help me start now my Samurai engine g13a to test if its running all good cause due to fire at engine bay electrical wires were been destroyed.
Awesome thanks bro.
Thank you for that great tip your awesome dude very helpful
This is perfect. Lost power to half the fuse block on my 86 k10. So if I can't figure that out this weekend, maybe I'll be able to get it started enough to drive it home... 🤞
Hey thanks for the help u saved a old 76 elcamino from the graveyard
Right on helped alot
Very good vid to point great explanation
Great job
I thank u so much buddy you made my day thanks bud will be subscribing thanks.
thanks! helped a lot!
Good job!!
Thanks, you're right. No videos anywhere. I knew how to do it on a mopar but not a gm.
Wow really helpful
thank you
Thankyou 🙏
Thank you! finally a video without modules etc. My button shall be sneaky so nobody can peaky ;)
Thank you!!!
Bought a 85 z28 camaro and it had everything ripped out and couldn't find a video of people running these without computers so thanks for the help
I just bought an 84 camaro and I have to do the same thing, did it end up working for you?
Thanks a lot life saver I did it today I’m so happy right know also Subbed Thanks again
Awesome thanks you
Yeeeeeaaaa buddy thank you!
Good deal, thank you
Hey thanks my classic was running last year and car would not start . Now it does thax
Big help. I'm wiring up a push button start on a 383 stroker in a 1932 Ford Coupe. There's no harness haha
383 in a ford? That’s sacrilegious! Lol good luck to you sir hope this helped
Thank you bro you saved me a lot of time wish I could buy you a beer 🍺
I did something similar. However, I can, at least, turn the key to the on position. It just has problems turning over. So, I wired a push-button to short between the solenoid and the positive battery terminal.
You need to make more videos great content
Saved my ass dude thanks.
Awesome
4:32 with the use of a continuity tester you could find the accessory wires going to the key switch, use a relay. Could easily find the starter wire too there. Might need a helper to operate the key
Guy knows what’s up
Got a 1990 YJ can’t wait to try this on it
Nice! I’m a big Jeep guy, I’ve had more than I’d like to admit it lol. Always loved my YJ’s. Have fun wheeling 👍
Did you use solid or or stranded wire?
@@rylantedrick9470 stranded wire, not sure if it makes a difference or not though
It doesn’t I was just curious, I am having trouble locating the distributor on this thing tho
@@eazyduzit5309let me rephrase, I don’t think it has an hei distributor so I’m having trouble figuring out where to connect the wire that you ran to the battery spade
Could you make a short video about how to wire up alternator , good content bro
nice
thanks
Can you make a little diagram?
Very good job
the switches amp ratings and more importantly what type it is exactly might be useful for some here. I assume the secondary for the distributor connection is just an on-off type. I get the push button starter is for certain a normally open aka not connected internally momentary switch making a connection only when pushed.
For me something in my steering column broke that changed the position of the ignition hopefully this will work
Thank you that is exactly what I needed to see. Working on a 65j300 gladiator jeep pickup.with a late model chevy tilt calmom . the key still working but it won't turn over or start truck.I know there's power there because everything else is working I E radio, lights and on. Your insight please.
I had the same exact problem in this truck! Someone put a 90’s model Chevy tilt column in the truck and I had the same deal. In your case, I would turn the key to the “on” position then check to see if your getting power to the ignition coil (I’m going to assume you are if everything else is working but make sure to check). So if you are getting power the the ignition, but the engine won’t crank when you turn the key, then you can either do a push button start like in this video ( positive terminal on starter -> push button -> negative terminal on starter) but instead of running an ignition switch you would just need to put the key in the on position. Or, if your trying to just turn the key and crank the engine, then you would have to trace your wiring (assuming you have a wiring harness) from the starter to the ignition and see if there is any issues with the connection. Sorry for the late response, hope that helped a bit lol
A even easier method is to attach the wires as described with only 1 starter switch between the battery and starter side of the starter solenoid. Directly connect the HEI and battery with a wire.
I have an old GMC Hy-rail step side, I want to bypass the starter key and just use a pushbutton in the cab
Considering this for my Datsun 210 it is from 1979
Good job
The pest explanation
I was just curious how would you do a point system?
How do I get spark on my 95 mustang??? This video helped but I don’t have spark
What if I did all this and there's no spark coming out of the sparkplug wire ??
Does my ecm have to be grounded in order for the injections to fire?
What about if I need a choke?
Great video!! IF no HEI....using an old conventional distributor....then how to run the connections?
Thank you! The goal is to send power to the ignition coil. If you could run a wire from the positive end of the battery to a switch, then another wire from the switch to the positive side of the ignition coil, then it’ll get spark to the plugs
@@eazyduzit5309 thanks for the follow-up. Will do
Could work great for a jet boat too
So simplified much appreciated and yes 30 amp fuse in between for sure, mice ate up the harness in the Nova I bought.
What did you end up doing for hooking up your alternator so it will charge and do it’s thing?
I actually just installed a new American auto wire harness on my buddy’s k10 and it was super neat and simple to do if you plan on redoing your harness. 10/10 recommend, anybody can do it. All the wires are labeled like every six inches and factory color code. Pay the money for it, you won’t regret it.
But if you don’t want to go about doing it that way and you just want to get it running for the moment, I don’t exactly know how to rig the alternator 🤦♂️ but I do know that there is a wire from the positive terminal on the battery that plugs into the alternator. On that same plug there is another wire linked to it (a brown one I think?) that runs to your fuse box. I believe it’s all linked to the ignition at the end of the day. So if I had to take a guess, I’d link a wire from the “BAT” spade on the distributor to the alternator
On your alternator there is a plug-in. One side of your plug-in has a thicker red wire coming from the positive terminal on your battery. The other side is where you want to run your second wire. And that one, if I’m thinking right, will be from the alternator to the BAT on the distributor. Then to test it to see if it even works, I would just start the car up, let it run for a while and then unplug the positive terminal of the battery. If it stays running (and obviously assuming the alternator is good) then it’s all working fine. If it dies then… we’ll, I’m wrong lol. But it should keep running if you unplug the battery. But like I said if your harness is bad already and your trying to make the car nice I 100% recommend the American auto wire kit, it’s a bit pricier but way way worth the money. They give you all of the factory style connectors and drawn out directions and all of the wires are factory color coded and labeled every six inches. It’s pretty hard to mess up
@@eazyduzit5309 badass! Of all the cars I’ve had I’ve never had to fix much wiring other than tail lights and crap like that. The more I look I think the factory harness isn’t as bad as I though there’s just a few engine compartment spots like the main lead wires the driver headlight. Luckily a ton of the wiring was covered in plastic wire looms. Only issue I’ve got is someone tried replacing the ignition switch that tore of the shaft the cylinder goes in the new on jammed right up as well. So I’ll probably just hook up a push button/toggle setup.
@@eazyduzit5309 definitely if we find more wiring issues I’ll take your advice on that kit, the Painless kits look like a headache haha. The bracket they have on the engine the alternator is upside down so can’t see the wiring for shit and I didn’t see a wire chilling to run back to the battery. I need to just buy a stock bracket since I need new belts anyway. I don’t know why they did some of the things they did haha