Ford Focus RS Mk3 - Hambini Quick Shift Install - NO Hammer Needed

Поділитися
Вставка
  • Опубліковано 15 жов 2024
  • Please Subscribe it's FREE you know :)
    Ford Focus RS Mk3 - Hambini Quick Shift
    Today i installed a Hambini Quick Shift, I decided to make a removal tool at work because i didn't want waste time hitting it out with a hammer
    The Hambini Quick Shift as 5 levels of reduction 25%, 30%, 35%, 41% and 46%. I when for 46% from the get go
    NOTE:
    The Pin did fall out at 7:06 but a quick few taps of the under tray and it fall out :)
    Also i did knock the pin in flush at 13:10

КОМЕНТАРІ • 17

  • @irelmo69
    @irelmo69 7 років тому +1

    Great idea! This will be my first mod so will make one of these too I think. I guess I could use the new part as a template and test bed for the tool.

    • @RSFocus435
      @RSFocus435  7 років тому +1

      Hi, Thanks, Make your tool with an M8 Thread and turn down a long M8 bolt at one end to 6mm (pin size),Use this to push the pin out then use an M8 bolt to push the pin back in :)

  • @AWDMods
    @AWDMods 7 років тому +1

    Great Video!

  • @herpderp1662
    @herpderp1662 6 років тому

    May end up wrapping mine eventually. I dont wanna cover the beautiful blue... but it takes damage way too easy, and good fucking luck finding someone willing to do paint match correction on this 3 layered BULLSHIT.
    Side note. I put the mountune QS on mine and it hammered out in like 2 min. I dunno what everyones issue was. And my car has sat outside every day since I bought it, has 10k miles and was driven all winter. Just have to hit it like you have a set.

  • @STEVEBHPDEVON
    @STEVEBHPDEVON 7 років тому +1

    brilliant video does it make much difference when hooning around? cheers steve :-)

    • @RSFocus435
      @RSFocus435  7 років тому

      Steve BHP DEVON Hi, most definitely, with it being so short it's like you don't remember pushing the clutch in

  • @mainman2999
    @mainman2999 5 років тому

    cool. but when did "the start" become that dumb saying "get go" !!

  • @electric_benni
    @electric_benni 7 років тому

    Where you buy this tool for the roll pin? Thank you ☺️

    • @RSFocus435
      @RSFocus435  7 років тому

      killhawk1470 Hi,made it myself

  • @STEVEBHPDEVON
    @STEVEBHPDEVON 7 років тому

    how much was the 1 u brought? cheers steve 🚗

    • @RSFocus435
      @RSFocus435  7 років тому +1

      Steve BHP DEVON £89.99

    • @STEVEBHPDEVON
      @STEVEBHPDEVON 7 років тому +1

      RS Focus 435 thanks for the info:-) cheers steve

  • @kronos350
    @kronos350 6 років тому

    Hi there thanks for the vids, can someone suggest me the best cold air intake and air filter to change right off the bat? thanks a lot

    • @RSFocus435
      @RSFocus435  6 років тому +1

      Hi, There's quite a few
      the one i have is AIRTEC Motorsport Stage 2 Induction Kit
      There's Revo Carbon Series Intake
      mountune Induction Kit
      Cobb Ford Carbon Fiber Intake System
      Ramair Performance Induction Kit

    • @kronos350
      @kronos350 6 років тому

      Thank you so much indeed

  • @nicolasvalli1614
    @nicolasvalli1614 7 років тому

    T'es vraiment pas doué !!!!!!!!!!!
    Prend des leçons de mécanique