Hydrogen Combustion Generator
Вставка
- Опубліковано 1 кві 2023
- Here is a new iteration of the Hydrogen Combustion Generator.
This is the same engine that has been seen in the past but with the new Hydrogen Carburetor, Correct ignition timing of 'top dead center' and a simple air intake water cooling method.
#hydrogen
Feel free to contact me on the 'Hydrogen Guys' Facebook page for the Hydrogen Flashback Arrestor used in this video
See more at:
/ hydrogenguys
Thankyou for all the support. - Наука та технологія
Could you make a video about the carburetor? And the changes you made to it?
HHOGenerators is the future!!
You're a real inspiration for our future. Thank you so much from all the one that believe in this amazing solution
I tip my hat off to you Sirs for working on uncharted territory. Years ago I tinkered around with vapor gas engines. What I found were two things that would bone you. One, the valve timing has a few degrees of overlap. This will cause an explosion which will tear an engine up big time. The second was the timing. When electronic ignitions came to be standard one has no real idea as to how the timing is actually being fired. I tried five different ignition assemblies and each had a diffrent timing advance and movement on base timing. I do not remember the baseline float in degrees but do recall it varied way to much unlike the points and condenser which is mechanically fixed.
Good luck with you video adventure too. vf
That’s really interesting, Thankyou for the insight. I will be looking into ignition timing more, this engine was set to 0 degrees top dead centre ignition timing, which is safe not not very efficient from a power stand point.
More work to be done :)
Glad you enjoyed the video and Thankyou for the support
@@Hydrogenguys Try to find an old ignition system that would fit with slight modification. Good luck.
My mad scientist❤. Love what your doing mate, keep the passion going strong!!!!
Much appreciated 😁
Love the research ❤👍👍
Thankyou for the support
We need to run our engine in hydrogen today........ I love your videos
That’s the dream :)
Exhaust gas recycling reminds me of GEET by Paul Pantone. He got awesome results using his device as catalyst of not only exhaust but also fuell going into engine. Maybe it helps 😉👍🏼
Great suggestion!
I also learned that adding ammonia to fuell, gets rid of Nox particles. Ever seen the bendall thunderstorm generator? Malcolm Bendall claims he can get rid of carbon in the exhaust by ionising the air before it enters the engine. Letting the ionised air thru airstone in water to make cavitating bubbles with the vacuum pressures on the inlet of the engine. This proces forms plasmoid structures that cleanup the exhaust gasses. He got 20%oxygen from his exhaust and no carbon. 😆😅😳 Also very interesting to look into. 😉
maybe use a fogger, like the ultrasonic ones in small ponds creating very high humidity
That’s a good idea, will look into it :)
I haven't seen your other video. Have you take account for wasted spark. This kind of engine has a magneto which fires at TDC and BDC. This is not a problem for the engine running on gasoline but will play havoc with hydrogen.
Hi, the wasted spark system is a pain to work with, you can actually see it backfiring in the video out of the intake port, thankfully it’s okay when the engine it operating at 1k rpm or more.
Thankyou for the comment
Hey could you go more in depth as to how the carbuerator is modified!? And the timing changed!? I have a Yamaha 5000 watt gen that just needs a few mods apparently and all I need is it to run stable rpm(not like a sport bike lol) without blowing up basically.. so if you feel like that methodology can be shared I would much appreciate it 😅
what electrolyte does the cell use, i was thinking maybe using bicarb might slow the burn due to the co2 from bicarb
I have been buying pure hydrogen gas to test these engines, it quick to get hold off and adds consistency when testing, hoping to get a pure hydrogen electrolysis unit again soon
Can I ask a question would using a Diesel engine be better because of the stronger head and the tolerance’s are tighter from firing on compression?? Would that help ??
Thanks for the comment, yes that would be ideal, when running hydrogen gas in a combustion engine the compression ration can be increased to claw back some power. Not sure about the compression igntion but somthing to look into for sure.
Without water hydrogen detonation causes an implosion. Do you think the pistons are driven by implosions?
When water is added the heat from the detonation is tuned into explosions because the water expands into steam?
Still combustion not an implosion,
The spark it triggers at TDC so the piston is forced down, if there is an implosion the combustion pressure still overpowers it, or the engine wouldn’t run.
Extra power is potentially added from the water cooling being turned to steam. But it’s really there to reduce the hot spots in the engine.
Thankyou for the comment
Will this carburettor setup work with a small bottle cell instead of using a compressed bottle?
The engine requires around 4-6psi to operate, so long as there is enough pressure it will run .
I suggest using a oil dropper like on some gas cars whare you can just a oil drip
Thanks, will look into it
Hi can you tell me what the Hydrogen LPM is for this setup>
Hi, from some basic calculations it looks like it was around 9.5LPM, not amazing but something that can be worked on to improve, for efficiency it’s safe to say fuel injection is the way to go. These engines I have made are just working examples of low cost engines without fuel injection.
Thankyou for the comment
Try meter mixing exhaust gases to the input gasses. This will slow the burn rate of the hydrogen. Look at meyers wfc memo for figures. Edit i see you mention this at the end.
Hi, a simple EGR system would help these small hydrogen engines alot.
Thankyou for the comment and support
@@Hydrogenguys I remember I had a research paper that mention 11 deg. PTDC as being optimal but I can not find it now, if I do i will send it on.
@@johnharding2912 That would be fantastic,
Cheers
Where can I buy the kits mate ?
The auto can't respond to questions only what he does is replying to those thanking him for what you haven't Clearfield us
Only respond to questions when i have somthing to upload, do you have a question?
1st! I love your channel! I love the idea of a gasoline replacement that could be farmed from solar or wind. Hi everybody!
Thankyou for the support, the aim is to keep the internal combustion engine alive. A carbon emission free combustion engine for all.
Perhaps DI water would reduce your rust problem.
Very good work! Please furnish instructions, the generator model # used, and parts list and where to get the needed items to make this modification as a set of plans that all of us subscribers can obtain. We will happily pay for the set of plans and you will earn money! God blesss and be well!
Could you use something like "cutting oil" instead of water, to avoid the rust problems??
Nice idea, will look into it, cheers
So cars need their timing adjusted?
Yes very much so. I’ve just uploaded a hydrogen car video on the UA-cam channel, go check it out :)
Thankyou for the comment
With water injection you are increasing compression as water doesn’t compress so at top dead centre you have a smaller compression area. People need to understand all the facts with this system to understand it.
You need a smaller combustion chamber so the timing and firing needs to be different
This is amazing
How many liters per minute of hydrogen gas is going into the generator?
Hi, i didn’t measure it with this engine with the new ignition point and water valve cooling but from basic calculations it looks like it was 9.5 LPM, not great but something that can be improved.
Thankyou for the comment
Do you think an hho cell would work for this ? Nice to see that you are making progress.
Add s little Marvel mistry oil to the water or just use all Marvel mistry oil for top cylinder lube
Will look into it, Thankyou for the info.
Where can we buy flashback arrestors?
Amazon
Ahh of and I also wanted to check and see if I’m the only one that thinks a micro car distributor that has adjustment thru rotation a amazing upgrade compared to whatever cheapo engineered stuff they put in these to save the 10 dollars or whatever..
Can you do this to turn a turbine and generator electricity
Hydrogen turbines exist, so don’t see why not :)
Man I wish I knew how to do this
I will uploading ‘how to’ videos this year so everyone can build one, hope you like the video.
@@Hydrogenguys that’s awesome I’ll definitely stay tuned
where can i get this hydrogen carb?
It’s an LPG carb that can been converted, the flash back arrestor you can buy on my Facebook page, just drop a message on there, link is in the video description.
@@Hydrogenguys are you able to post a video on how you converted it?
Use a water bubbler,
Not needed with pure hydrogen gas. Can use a flash back arrestor instead. The gas used in this video was 99.5 percent pure hydrogen
and or how can i make one?
I plan to make a video explaining in detail in the next few months, so everyone can make one :)
@@Hydrogenguys hell yes bro!!!
@@Hydrogenguys i love the page im always watching the new uploads and older ones too real interesting stuff
@@Hydrogenguys i saw a video way back of Bob Lazar running his corvette off hydrogen i believe
it might be a cool thing to look into and maybe do a video on you should definetly check it out!
They not put 25%lpg in it and no water
Hi , Not sure what you are referring too, but this was pure hydrogen gas with water used for combustion chamber cooling
are crazy ... why put water ? the hho is cold. you need read more about hho..
This was pure hydrogen gas not HHO, so the water is used to reduce hot spots in the combustion chamber to prevent pre ignition.
Hello Hydrogen Guys , i woud like to make a standalone engine 4 cyl that i will couple to a permanent magnet motor who can produce energy tfor hho and extra energy , coud that be posible to win extra power ? , do you have an email to contact you .