I used to work in a body shop 10 years ago on the wash rack. I always wanted to learn how to paint, but before I could, that job and I parted ways due to them closing up shop. I have always been a detailer by trade and spaz over perfect paint. Well last month I started acquiring all the tools needed to start painting here at home. I will admit I was pretty scared of how much money I was about to spend messing around until I got it right. This all started because I have had to have the hood of my car repainted 4 times now with less than satisfactory results ( improper match, stone chips down to the metal and now, pealing). I was scared to pull the hood off a 60000.00 car and just get after it, but thanks to your channel, I could not be more excited to do it! you channel has helped me not only fill a void in my automotive and detailing knowledge, but also realize a dream of one day being a painter. Thank you for these videos and the knowledge you have passed on!
TIP - ALWAYS drill a hole just past where the end of the crack runs to - this will help reduce the chance of a stress riser causing the crack repair to fail. Learned that as a DENTAL TECH - fail to drill a hole in the end even after all careful crack repair work had been done and for sure - the repair would not last too long. CHEERS from AUSTRALIA.
Buddy of mine used to have a 95 Civic coupe back in the day that was "Milano Pink", and he got it resprayed in New Formula Red. The car looked awesome!
I was raised in Auto Body repair and you are doing top notch repairs and very good quality paint work! Brings back memories of being in my dads shop. Nice job!
Saw this car at the meet, Was wondering what the heck was up with the front paint? It looked so well put together didnt think the owner would go for that. Glad you’re fixing the botched job.
cant wait for the next episode in the series I have a couple of fenders that have a ton of fiberglass cracks so this was a great watch for me, thank you for spreading the knowledge!
On the front bumper that stress crack is going to come back if you don't grind part of the reinforcement bumper bar down. Get an angle grinder and take the sharp corner out! Great content as always!
After working with fibreglass for a little while and repairing cracks it is always a good idea to drill out the end of the cracks just to make sure it doesn't continue on after the repair.
@@PaintSociety also depending on the material used (chop strand or woven cloth) there can be delamination around the crack so it's good to drill holes down each side and use resin with a filler to create a bond through the repaired panel.
Really enjoyed this video. Right now my panel shop stuffed up painting my nismo fenders on my r34 gtr a different shade to the original colour, very noticeable. Hopefully they can fix it asap
A small hand held sandblaster works real well on fiberglass cracks, it will eat away the material, leave a good tooth and the groove will have some of the parent fiberglass hair still attached to the original matting, this is not for the overall area just where the dremmel was used, give it a try I just use the siphon unit with the hose and just push the hose in the sand bag.
Do you have any merchandise!? wouldn't mind a Paint Society T-shirt! think i spend more time watching this channel than i do with the wife haha. Good work Brian. - Paddy.
This is going to be a cool project. I just picked up a 2002 trailblazer in black that had a few door dings and clear pealing. I'm going to do an overall on it but should be cool
Thank you 🙏 so much again brother for the information ℹ️ everything well done 👍 keep sharing the knowledge bro because we never to old to learn keep it up brother all the best stay safe thank you 🙏👍👍👍👍👍👍👍👍👍👍👍🙏🙏🙏🙏🙏🙏🙏👌👌👌👌👌👌👌👌👌👌👌👌👌💪💪💪💪💪💪💪💪💪💪💯💯💯💯💯💯💯💯💯💯💯💯💯💯👊👊👊👊👊👊👊👊👊👊👊👊👊👊👏👏👏👏👏👏👏👏👏👏👏👏👏🔥🔥🔥🔥🔥🧨🧨💣💣
The sad part is that the clear coat looks like it flowed nicely but they had contaminated air lines and didn’t care about the finish. Whoever painted it has skill but not much else.
Nicely explained , but can i ask you - Is this "sprayable polyester filler primer" or "2K high build surfacer primer"? just subscribed by the way. Great channel for learning. You're teaching straight to the point and enjoyable to watch also!
Next time you're having trouble cutting through the paint try dish soap or wax and grease remover. Looked like it had some protection keeping the sand paper from working correctly. ;)
Good job on the paint but didn't you hear Hector is going to be running 3 Honda Civics with spoon engines? And on top of that he just came into Harry's and he ordered 3 T66 turbos, with NOS, and a Motec system exhaust.
I hold this video dear to my heart, because I own an S2000. And it's nice to see one get worked on by someone who knows what they're doing.
This person wanted it to be a viper 😂
It's also nice to read a comment written by someone who knows the difference between there, their, and they're. Nice job.
@@williamramsey8978 this car is the opposite of the viper
What caused the textured bumpy paint job
I work at a regular body shop prepping and man it’s nice to learn a couple new tricks since we hardly get cars like this
There are so many tricks to that trade it's crazy lol
Brian, you are doing an amazing job! This build will be beautiful when completed!
I am pumped
I used to work in a body shop 10 years ago on the wash rack. I always wanted to learn how to paint, but before I could, that job and I parted ways due to them closing up shop. I have always been a detailer by trade and spaz over perfect paint. Well last month I started acquiring all the tools needed to start painting here at home. I will admit I was pretty scared of how much money I was about to spend messing around until I got it right. This all started because I have had to have the hood of my car repainted 4 times now with less than satisfactory results ( improper match, stone chips down to the metal and now, pealing). I was scared to pull the hood off a 60000.00 car and just get after it, but thanks to your channel, I could not be more excited to do it! you channel has helped me not only fill a void in my automotive and detailing knowledge, but also realize a dream of one day being a painter. Thank you for these videos and the knowledge you have passed on!
Even more impressive than your knowledge..its the way you can teach and explain !
I will really like to see the part 2 of this vid
Yes please
They got every single great honda in this video, wtffff😳🤯
TIP - ALWAYS drill a hole just past where the end of the crack runs to - this will help reduce the chance of a stress riser causing the crack repair to fail. Learned that as a DENTAL TECH - fail to drill a hole in the end even after all careful crack repair work had been done and for sure - the repair would not last too long. CHEERS from AUSTRALIA.
Good idea forgot about that thanks
That yellow Type R remind of the 2000s!
Buddy of mine used to have a 95 Civic coupe back in the day that was "Milano Pink", and he got it resprayed in New Formula Red. The car looked awesome!
I was raised in Auto Body repair and you are doing top notch repairs and very good quality paint work! Brings back memories of being in my dads shop. Nice job!
Thanks Jeff!!!
Nice to see that Josh from Jake and Josh is still working.
You have given me the confidence to take on any spray work
Can't wait to see how the new paint lays down and the blending works.
Going to end up painting the whole car
The video made me fell like I was right along with you guys. Great upload! I can't wait for the next one
Gotta come back to weld this trunk. Road trip? Lol
This is going to be a legit series.
The guy who painted it: "well it's red right?"😂😂😂😂😂
By far the best video you guys did so far. IMHO. Keep up the good work.
Thanks Jonas!
Looking forward for part2. NFR is a great color. Painted my 66 mini same color as well. 👌🏼
The one dislike is the guy who painted it previously lol
It’s a part of the game. Doesn’t bother me
Lmao probably so
Damn there were 51 people who contributed to this shit paint job lol good video you got a new subscriber
Lmao probably
Every time I watch your videos the first thing I think about is those guys in the White van scams. Literally the first thought I get every time.
Hard to get quality out of those guys after seeing the work it takes
Saw this car at the meet, Was wondering what the heck was up with the front paint? It looked so well put together didnt think the owner would go for that. Glad you’re fixing the botched job.
100% agree
Watching you block down that bonnet by hand reminds of when I did a paint job on an s2000 a long time ago. Its a small car but that bonnet is huge!
Huge and the fenders as well
Spoon s2k, dc2 pristine w/o tuning. Man, you work at my dream garage
Dealership 😊
Check out Acura Honda classic on UA-cam
@@PaintSociety i was pretty sure of that. you always work on hondas (at least in your usual booth).
I go check out this channel!
EDIT : subscribed!
You've mastered your trade, but your videos are just as good. So entertaining. Keep up the good work!
Editing is too new to me but I’m learning !
Thanks for this one! I’ve been interested in seeing how you worked with fiberglass. Keep up the great work and tips!
A must see for every customer! Better than Tech School.
Thanks !
cant wait for the next episode in the series I have a couple of fenders that have a ton of fiberglass cracks so this was a great watch for me, thank you for spreading the knowledge!
Yes! Get that epoxy Diego. It’s great.
“Don’t over think it, it’s just paint.” Easy for you to say lol! Love the videos slowly building my confidence thx.
Cant wait until I'm ready to get my TSX repainted. Definitely bringing it to you guys.
On the front bumper that stress crack is going to come back if you don't grind part of the reinforcement bumper bar down. Get an angle grinder and take the sharp corner out! Great content as always!
Great tip!!!
Thanks for the quality videos...that polish burn through info will come in handy for me now working on my kids truck...I got a little carried away.
Going to rewatch this series i think
Damn, what a shop ITR, S2k, NSX! Great video once again!
Check out Acura Honda classic on UA-cam !
Thank you Brian I like these types of video cant wait for part 2 stay safe until next time
Like butter,you guys do extremely good work,always look forward to seeing ur videos 👍👍👍
After working with fibreglass for a little while and repairing cracks it is always a good idea to drill out the end of the cracks just to make sure it doesn't continue on after the repair.
You’re right Chris
@@PaintSociety also depending on the material used (chop strand or woven cloth) there can be delamination around the crack so it's good to drill holes down each side and use resin with a filler to create a bond through the repaired panel.
That primer sprayed down so nice 😍
Oh yea. I love that gun
Stevie wonder’s painter came out of retirement😂for this one
Stevie wonder did the paint match on my car too
I like the way it is. It gives kinda a new look..
Just started watching your videos. Already love your channel! Grew up around a body shop. It’s so satisfying to watch a paint job turn out
Welcome aboard
Thank you!
Really enjoyed this video. Right now my panel shop stuffed up painting my nismo fenders on my r34 gtr a different shade to the original colour, very noticeable. Hopefully they can fix it asap
forget that S2000, those 2 Phoenix Yellow ITRs look immaculate
A small hand held sandblaster works real well on fiberglass cracks, it will eat away the material, leave a good tooth and the groove will have some of the parent fiberglass hair still attached to the original matting, this is not for the overall area just where the dremmel was used, give it a try I just use the siphon unit with the hose and just push the hose in the sand bag.
Very cool spencer!
Brian you rocks car looks awesome
Build series, i like it! Still making great content. That's funny in a pinch i bought a husky and ive used it for six years!
It kills me when people paint a car then down refinish the paint when it’s done and it’s orange peeled. Great work btw
So glad I found your channel you are a really good teacher thanks
Thanks Ed
Muy bien Bro saludos desde Honduras 🇭🇳👍 excelente trabajo
Do you have any merchandise!? wouldn't mind a Paint Society T-shirt! think i spend more time watching this channel than i do with the wife haha. Good work Brian. - Paddy.
Haha ! Yes I do. I have the latest shirts available. Please email me. Paint.society@yahoo.com
This is going to be a cool project. I just picked up a 2002 trailblazer in black that had a few door dings and clear pealing. I'm going to do an overall on it but should be cool
Awesome James!
Best painter on youtube!
First time ever watching a video. Great host. Very instructive and well thought out. Good channel
Thanks Mike!!
Yes!! Body work, Your awesome this is what I have been waiting for!!
Hope you learned something !!
Absolutely amazing!! Definitely tuned into this series!! Great job Brian!!! Cant wait for the next episode!!
your videos are well done and well explained. 👍Appreciate the effort and the obvious love of the trade.
Cracking job mate /Rebuilds Ni
the yellow typer integra is beautiful
More on Acura Honda classic UA-cam
Awesome video great at explaining everything with great pratical teaching as well. Love it bro!
Your videos are on a professional level!
Thanks!
I am so sorry but I could only give one "thumbs up". You deserve more!
The primed parts look better than the bad paint job.
I love your channel! It’s great content and you make it seem so easy and explain everything you’re doing so well. You should have 10x more subs.
ThNk you!
I would get lynched back here in the u.k for spraying 2k v.o.c's into the atmosphere like that, nice vid
Awesome man thanks for showing the whole process, I'm looking to paint my Tesla Model 3 Rebuild soon.
I want to see that !
@@PaintSociety Here it is! Take it easy man! ua-cam.com/video/0wsqyQ3LWls/v-deo.html
Excellent work, you put this primer really smooth! :D Cheers
Can't wait to see part 2! Nice work!
Thank you 🙏 so much again brother for the information ℹ️ everything well done 👍 keep sharing the knowledge bro because we never to old to learn keep it up brother all the best stay safe thank you 🙏👍👍👍👍👍👍👍👍👍👍👍🙏🙏🙏🙏🙏🙏🙏👌👌👌👌👌👌👌👌👌👌👌👌👌💪💪💪💪💪💪💪💪💪💪💯💯💯💯💯💯💯💯💯💯💯💯💯💯👊👊👊👊👊👊👊👊👊👊👊👊👊👊👏👏👏👏👏👏👏👏👏👏👏👏👏🔥🔥🔥🔥🔥🧨🧨💣💣
Thank you
easy there
Great presentation. Thanks for sharing.
Hey Brian! What a nice work! That eastwood lays it really good. I Would love to see a rim repair too :) Cheers from Hungary!
Take more than paint to make that thing beautiful.
im in love with all your videos keep it up bro
Keep killing it mate ...nice job
Thank you!
Welcome mate
Amazing!!🔥🔥🔥Brian you are the best 👍🏻
really fun job , i was on learning soon get a job in europe
As always learned a lot today great video keep them coming 👍 stay safe🙏😷👍
The sad part is that the clear coat looks like it flowed nicely but they had contaminated air lines and didn’t care about the finish. Whoever painted it has skill but not much else.
Amazing work brother!
Nicely explained , but can i ask you - Is this "sprayable polyester filler primer" or "2K high build surfacer primer"? just subscribed by the way. Great channel for learning. You're teaching straight to the point and enjoyable to watch also!
2k surfacer primer
Next time you're having trouble cutting through the paint try dish soap or wax and grease remover. Looked like it had some protection keeping the sand paper from working correctly. ;)
It was ceramic coated
@@PaintSociety is there something that will remove the coating for easier access?
Another excellent information video and really cool build!
Wow Lesonal paint bank!
It's a 2 tone fade! Love it! LMFAO
Brian like always very nice work and im smashing my like botton kaboooooooooooooom
I love the repair steps taken. Im sure the cost reflects the repair, but at least I know it would be done right like this.
Love these videos and information. Thanks!
That's why I prefer PlastiDIp. Faster, Cheaper, Damn Craziest, Customizable, Peelable, Solo Job.
Learn something ever day!
You could've save so much time using the new sandible Gorrila automotive duct tape! No mess on hands...
NICE...CONFIDENCE...The name of the game...If it flops...Sand it down and do it again...It,s just paint...I,m fix,in some ones mess as we speak...lol
Great job
Wow this was a great video ! I want you to paint my Berlina black S2000 . I'm local 👍
Great Video.....i should bring my car to you
Nice work you do a great job
Thank you!
As a fellow s2000 owner, this made me cringe..
Nice work.
Keep doing video 🥰🥰💪🏻💪🏻💪🏻🔥🔥🔥🔥 u doing great i will paint my whole car in my garage 💪🏻
Good job on the paint but didn't you hear Hector is going to be running 3 Honda Civics with spoon engines? And on top of that he just came into Harry's and he ordered 3 T66 turbos, with NOS, and a Motec system exhaust.
Awesome job bro!!
I’d like to see part 2 as well pse😊
Wednesday
Tks😊👍
You make good paint guy!?