12min of going 60mph motorized bike lmao
Вставка
- Опубліковано 22 тра 2024
- Subscribe & Bell for more content like this!
Support: ko-fi.com/trentbikes (APPRECIATED!)
Discord: / discord
Buy MB stuff: www.amazon.com/hz/wishlist/ls...
motorized bike, yd100, zeda 100, smolik performance, la hover bikes, fastest motorized bike, fastest motor bike, fast motorized bike, minarelli bicycle, felt faker, felt faker bike, felt faker motorized bike, athena sport, 70cc athena, motorized bike 60mph, motorized bike 50mph
#motorizedbike #moto #motorizedbicycle - Ігри
I swear to god, you need to be a voice actor, bro your voice is godly
If it's Godly then I'm Santa Claus
man, be respectful@@EM-mh4fw
Thanks I guess. That's my deaf accent.
@@EM-mh4fwF U Santa you forgot my present last Christmas. If you can't fit down someone's stove pipe leave their present at the door like FedEx does
You are flat flying brother 😮😮😮😊😊😊🎉🎉🎉🎉 hell yeah keep up the great work!
thanks
Dude that’s terrifying! Love it!
Absolutely.Screaming brother be careful out there now
I will thanks
Only person i have seen give good info on motorised bicycles thanks 🙏
welcome
Some fine tuning, That power band is sweet! Should definitely upgrade the rims Bro, maybe Mags? My thinking is if one of those idiots that flipped you off pulls in your lane and you hit a curb with light spoke wheels there’s a good chance could fold, plus the wear and tear at those speeds. Nice Work! Be safe Bud
Awesome Video my friend! That Bike is a Screamer! 👍
Thanks
love it dude do you think you could tell me what parts went into this build and give me some advice
You got balls to hold that throttle open a lot of people are scared to. Sounds great nice build💪🏼💪🏼
Not sure why ppl are scared to do that... it just gives it more power
@@trentbikes exactly!!
@@trentbikes 💯👍
Fire
That is seriously fast. Impressive build. Wow
Is it all due to that Athena cylinder? Much better than a cast iron cylinder?
just depends on cylinders themselves usually. I do believe that iron vs aluminum have differences in RPM though due to friction etc.
You need some Geminis man! I recommend getting the 24in pitbike wheelset, lower to the ground and I noticed that you have a pitbike caliper in the front, get one front and rear!
Yeah, that's my plan. I'm probably gonna get 18" moto wheels from gemini instead
I’m wondering, can a $413 4-stroke kit from BikeBerry fit on my $477 men’s Schwinn Standpoint bike with 27.5 inch wheels?
I don't know, I've only built a couple motorized bikes. Ask on my discord server though
What's your cadence chain sprocket gearing and watt output?
10/36T 26", up to 12k rpm and probably about 10hp peak when it kicks in, more or less
Nice nice
I have a schwinn stingray that i might do something like this to, any ideas
Just be careful! If you want more power and speed, while also saving money, something like maybe 50-55mph or so, get an iron minarelli. Or if you can afford a $150 top end, get athena sport (070100) on amazon.
Bro im thinking about buying a conversion kit for a chinarelli on aliexpress, will it fit on a yd 100 bottom end? Thanks😁
@@brunuman I believe it needs 45x45 stud spacing, so 66/80cc.
Id be wearing gear going that fast
nah lol
Did my comment dissapear? What? Nice video man
UA-cam do be like that sometimes
What tires you got on there man?
Kenda City Slicks
Good video bro, did that guy just flip you off ?
yes
@@trentbikesthe dude was probably jealous of you because at least you don't have to pay the car note for your bike and while he had to
If you glued sandpaper to an old piston and set it on your work table. Then take your head and screw a spark plug in it you can hook up a drill to the spark plug and hold piston with your hand and make your piston angle (23 degrees) fit the cylinder head. It would work like a 3 angle valve job on a 4 stroke engine. Then you will see high rpm gain’s and get your squish down as low as mine..038. You can’t hurt anything,it’s a good thing.
I just use a CDH racing head. I have already done the drill trick, I had to do that when I blew my minarelli and athena sport up due to failed crank bottom conrod bearing 😅😅
what bike frame is that, i like it
Felt faker gas frame. I made a full video on the whole bicycle build! Check it out
@@trentbikes i will check it out, cheers
Why north americans hate 2 stroke engines and small bikes so much? I build mopeds and other 2 strokes, I've only received hate from either north americans or local rich bois. It's mental.
Idk, they never had fun in their life.
@@trentbikes Same! They dont have humble roots, and dont know the thrill of making something slow go faster! All of this only makes me double down and want to build faster stuff!
bro why are you using those shhh 1t tires
I gotta upgrade them asap.
That thing is fast.
Have you gotten any speed wobble yet?
Ride safe!
no not rly
Alright, after making a custom seat (mini dirt bike) and ducking for aero, sitting all the way back, I did get some death wobbles.... Time to get a steering damper!
nice bike
ty
Nice bike
thanks, made a video on the build!
Careful there, DUI Dan. If the cops see you doing that they'll junk it.
Never had issues with cops.
What cylinder is that exactly?
70cc athena sport. Search up 070100 on amazon
Mostly tuning is what makes great power and why you are passing everyone up, with that carb that has low and high speed needle screws you can split hairs rich/lean till it's basically perfect. Nice build bro keep it going!
Thanks
How have you not had a tire blowout yet 🙈🙈
Idk. I should get them upgraded soon.
Runs super good it's a ripper
it sure does
What carb is that
stihl 090
@@trentbikes how come that and not a normal carb like a nibbi 19 is there any gain or is it the same?
@@alrums just a LOT easier to tune. No swapping jets required, won't have to go all the way back home, take carb off, bowl off, find what size jets I need, swap them, put it all back together, then try again and see if it's still rich or lean etc. It's also sometimes very hard to tune, especially if you're using clone carbs. It's running lean? you jet up the main jet more, to be correct or a tad rich ish, then quarter to half throttle is now rich enough to sputter not being able to take off, even if your pilot jet and needle is leanest. (30 or 32 jet and 1st needle for example).
A saw carb, just carry a screwdriver while you're 5 miles away home and get it tuned the way you want and you're good to go. Literally 3 screws, one idle, one low and one high. Downside is, if you don't know if it's running a little lean up top, you gotta go back home and check the plug still. Oh and also you can't tune mid range. It's just low and high. The 090 that I have is 20mm I believe.
@@alrums Oh and, if you do change to a saw carb, you need crankcase pressure to the pulse port to activate the diaphragm.
@@trentbikes damn
You should get some street tires if you're gonna be riding like that 😬
Yeah, I really should.
Yeeeahh boy, 12000 RPMs eh?!
I wanna try to hit 13k lol
@@trentbikes I m going for 17000
@@leonardarola hell yea dude, piaggio?
@@trentbikes A heavily modified one.
Bike Is a beast , lots of power
yes thats only like maybe 10hp (more or less). I have yet to try a piaggio, about 15hp ish topping out 17k+ rpm
@breezetixmoto 10 hp that's awsome , 15hp is crazy fast I bet
@@trentbikes I probably have 3 hp 😎
@@Pedalfast22 do upgrades and mods to it! I'm actually working on a video for that.
@breezetixmoto 🫡 I plan on hiting the 45 mph mark soon bro I have some mods in Mind
You should try some aero
Yep, I made a custom seat with a mini dirt bike, and that day I hit 62mph just by ducking down (and also a little bit of downhill assist). I might actually be able to get more speed just by ducking down, while using 32T... hmm.. Might actually go over 11k rpm. Most I ever got was 10,800 on 10/32T 26" topping out 60mph.
@@trentbikes I noticed you pick up speed when you tucked down...
Congratulations on your new record 60you made a comment about you don't care if you get diabetes yes you do my wife's got type 2 where you have to give yourself shots it's a messed up disease that I don't wish on my worst enemy . It changes your whole life what you do eat it's messed up ride safe brother
I already hit 60mph before, just on 32T gearing. I never hit it before on 36T. Then 61mph lol
Man i reach 58 MPH afternoon whit stock Exhaust🤘🤘🤘 waiting Yasuni R2 whit Super clutch target Stay at 70 MPH your Bike is too slow you going back Tommorow Man Good Job But you are too slow for me now 🤟🤟🤟
???? Wtf did I just read
I use a small backpack
lol I never thought of that. I still need a basket for large items like pack of water bottles etc
What’s the 0-50
idk
That's not practical to measure... Most of the time will be just peadling up to speed to even be able to let the clutch out. A rolling start from 20 mph would be a better metric for perfection.
@@jjhack3r Yh ik but you can technically start without peddling just takes longer to get to speed
It’s called a motor bikes that is 8hp, no way is it doing anything profound in 0-50
Junk and not safe or comfortable at all
Good job, you just learned about motorized bikes. You're wrong about it not being comfortable though. Sure, it may be junk, but at least I didn't pay $5000 for an electric bike just to go 50mph.
Junk? He built it from the ground up, he’s obviously learned a lot about them cuz he’s sharing the knowledge, safe/comfortable Meh lot of things are dangerous these, good clean fun though
@@billybob-qs2zd I cant agree with You more! 💯👍