GATE Titan V3 Mosfet Installation!
Вставка
- Опубліковано 22 лип 2024
- GATE Titan V3 Mosfet Installation!
Follow me on social media!
Facebook: / theairsofttech
Instagram: / theairsofttech
Music Used:
Kokoro - January
/ beatsbykokoro
SilkySoap- Hung over n sad
/ silkysoap
Ouska - The Woman Who was Heart Broken
/ ouska - Розваги
![[HOW TO] KWA T6 M4 Gate Titan Installation GEARBOX DISASSEMBLY](http://i.ytimg.com/vi/PV6r0yH4y3M/mqdefault.jpg)
![[HOW TO] KWA T6 M4 Gate Titan Installation GEARBOX DISASSEMBLY](/img/tr.png)
If you like my content and want to see more, please consider donating to my channel’s PayPal to help me make more, better content!
www.paypal.me/RyanSpurlock291
can this be installed on an aug a3?
You are seriously the most helpful airsoft tech channel on the internet. Thank you so much for these videos, dude.
looking forward to installing mine. been waiting for a video like this. thank you !
CAUTION! Do not place a metal washer before a plastic washer when installing, that can short your board!
Tough to find replacement phenolic washers if you lose or break the ONLY 1 provided with the kit.... anyone got a source?
I don’t think I said to place it on top of the board? Did I?
@@TheAirsoftTech i didn't perceive it that way, however it is something that someone might overlook. I think this guy was just giving a heads up...
TheAirsoftTech I believe you did, but people can be careless
My titan v3 didn't come with a plastic washer. Manual states that the v3 doesn't need that plastic washer. So you can put a metal washer no problem.
Ty for this video, and family first isnt a bad thing! Keep up the great content!
Your videos have not come up on my feed for awhile so i feel the need to comment: Your hair looks great
Hahaha. thanks, man!
Just did this a couple weeks ago, it works awesome.
Regular instructions place the selector sticker on the OUTSIDE. Is yours on the inside of the selector for any special reason?
Actually I´ve installed the v3 gate titan in my E&L AK very easy, fitted like a glove. No dremel or filling needed.
So, I have a Cybergun F2000 with the V3 from an AUG. With the weird progressive trigger it has how would I install one of these to work with that trigger system
I always use the AUG mode, either I can shoot or not. One opponent, pulling the trigger slightly, is more than that, pulling through.
It's a shame that it's only about installation, I haven't found anything to get the Expert version into the ramping, or how to do it. I can set it, but I don't know how it is used (I know what it should be).
Thanks for this man, I have one of these installed in my ICS 551 and it was a pain to get it together and it still isn't 100%. I'm gonna open it up and watch this again to hopefully get it all sorted out. Getting the motor to seat right in this gun is a bear too.
Hey man, I've a G&G 552 I'll be giving the Titan gate treatment soon; how'd your ICS go in the end?
@@AbokaseeRed still didn't go 100% I know G&g is quite different from ics so you might have more luck. ICS doesn't used a motor cage like the G&g does. And the gear box is slightly different too. I believe G&g uses standard v3 gearbox and motor cage.
@@kylendm G&G Gearbox is quite standard (albiet with different external selector furniture). It doesn't have a motorcage but instead this interesting bracket + gearbox system, like a "open cage" if that makes sense. I've heard several people say they've been able to use Titan-gates with them but never a photo.
I am trying to fit it on a Aug not so sure about how the cables have to run if you can help will be much appreciated
Hello, what for a v3 shell is this? I have a g36 from ares. I know it wouldnt fit in ther shell, but can i switch the shell? Do you know one that will fit?
I'm installing a titan in my friend's ak gearbox and everything fits, its shimmed, and when I checked, nothing was getting in the way of the sensors to causing any impingements. The only problem I have is it's too tight, to the point that the tape plate won't move. How can I fix this problem?
YES I NEEDED THIS
Hello airsoft tech. I’m having an issue with my g&g combat machine srs. It won’t shoot. I have taken off my trigger and literally hit the little fire button on the etu with a screw driver and my motor would not turn. Hopefully someone here knows what’s wrong.
I want too use a m120 spring so what gear ratio should I use for this and what motor?
How do you instal the titan with a 2 stage trigger on an AUG?
The titan programming card does not work for the titan v3
I had mp5k built, where would put in I put in ak mode
You say that you like the Titan better compared to BTC's lineup but what are your thoughts on the Leviathan?
My titan didnt come with the insulated washer or screw, can i use metal washers and the screw for the cutoff lever instead? The manual says not to but i dont see why i couldnt
Manual clearly says that in V3 version there's no need of plastic washer. Unlike V2, around the screw hole there aren't pcb lines that can short
Awesome!
Super helpful👍👍
So i need a USB LINK for my ios that sucks
Great video man. Not enough love for v3 gearboxes !
Now I kinda want to do a monster v3 build
I've installed two V3 gate titans, and neither of them came with any plastic washers. Should I be concerned?
Manual clearly says that in V3 version there's no need of plastic washer. around the screw hole there aren't pcb lines that can short
Have you ever experienced "feed issues" from your Gate Titan? My nozzle does not return to a consistent position after I installed the Gate. That was the only change, was feeding fine before....
work on your active breaking, ive ran into the same problems. Try every percent of AB that your titan can put on. Also try using a sector delayer. I personally dont really like using the adaptive breaking that comes default since sometimes it keeps the piston back to far and compresses my spring.
@@gpf32 thanks for the tips! Also, what firmware version are you running for your USB link app? They all seem to have extremely different options.....
@@ianf2969 the newest firmware, it should be in the general option
Motor should stop when the spring is fully released unless you have "pre-cocking" active. If the motor stop in a random position probably have weak magnets and it can't stop fast enough. BTW nozzle travel won't be changed by mosfet, so probably it's a delayer issue due to faster cycle.
Nice
Hi I wonder if you can help me I just finished to install my v3 gate but the selector isn't working properly on semi position it does a single shot and a burst after
Could you please help me?
@@alexcrescenzio724 You must do calibration in GCS
Also does it come already soldered and would i need different gears?
Yes, it's fully soldered. You don't need any different gears. Only make sure that are not "infinite-torque" type.
What’s up! Do you have any experience with Poseidon m4s?
Rebranded vfc ish
hi
is the Peru V2 optical mosfet any good?
Very I have it and honestly after also using a few Titans I like the perun more it seems to be slightly smarter the precock is more consistent and imo simpler to set up along with other functions it only short coming in comparison to me is the adjustability of the trigger as it only has one optical sensor to the titans 5 but I think the perun is still a better unit hope this helps!
twblack i wasnt sure because there isnt many reviews. only good one ive seem was from roguestudios. what motor and gears do you have and how good does is shoot?
@@Dawation I'm running SHS 13:1 and an SHS high torque it's a 36rps build at 379 fps (local limit is 380) it's set to have highest precock and will consistently hold my piston within about 1mm I love it
twblack im planning on getting shs 12:1 gears and a lonex A2 which is high torque. im also gonna put a max model trigger in
@@Dawation ya the perun will run that no issue man I honestly love it it's well worth the buy and I personally believe it better than titans it's a fantastic trigger unit and people sleep on it
Whaaat?? .. V3 has much better trigger and selector seting than V2 ..
Great video as always! I'm a fan of the leviathan more so than the titan, but the don't have a system for the v3 gearbox unfortunately. Only downside of the leviathan in my opinion is the cheap wiring their sold with.
Anyways, I also upload airsoft tech videos. If any of you guys are interest, I'd appreciate it if you took a look at my channel!!
Stallion Airsoft I’ll check it out
☺😊😀😁😂5 Smile's
I find it insane you're required to Dremel and cut a chunk out just to install it. Turns me away from this product.
It's not required, he just does it for his own ease in installing.