I had an odd issue with my g3. It would fire a few normally then would become erratic at reading trigger presses so wouldnt fire all the time. I put the sticker on the fire selctor plate even though it was copper and that fixed it. Diagnostics said the fire selector had been changed whilst firing
Every replica is slightly different, that is why we are always happy to help. In case of any technical issues, just drop us an email at support@gatee.eu - we will help!
I just installed an Aster in my Cyma Scar and it works great, but it’s seems I forgot to apply the gearbox sticker. Should I open it up again to install the sticker even if it’s working fine? I’m using a Retro Arms silver/aluminum trigger if it matters. Thanks
its all fun and games until it just simply stops responding and they tell you oh well. This unit should not need an additional $70 just to reset calibration.
I saw on Evike's page it says no gearbox modification is required to install an Aster. Is this true? Say I wanted to install one in a CYMA Platinum, which is famous for having bad MOSFETs and not being able to install a TITAN.
I would like to upgrade my E&C, and my SA-B16 One with this ETU. Do you have any information about the compatibility with the gearbox of these replicas? Thank you in advance
Hi, I had a problem installing the gate aster. When I finished installing it, and I was programming it, the replica fires in semi 3 shots and then makes a rather strange sound, in auto it doesn't fire or do anything. I disassembled the replica again to verify that everything was in order and appeared to be in order. Can you help me? I have a Kwa ronin t6.
Sure, you can use your standard V2 trigger with ASTER V2. After a while, you can change it to a dedicated Quantum Trigger when you will need much more sensitivity levels in your replica.
This spring should not be installed again. In case of any technical problems, please contact our support at support@gatee.eu - our specialists will help you!
Hello. I have a problem with my gate aster v2 beacuse when i plug in my 11.1lipo battery it has 3 beeping sound and then after i cant shoot the gun. thanks for the respons.
No need to remove bolt-catch nor gearbox modification in new Krytacs while using quantum trigger? Nice job Gate! I wish eather not modify the shell when use standard trigger, but it is what it is. New Titan revisions also not need to modify the shell or you plan to develop new versions adjusted to Krytac's gearboxes?
Awesome, will have to come back to this video tomorrow when I get home, we flew out to Cali from wv, and while we were here we stopped by Evike and picked up one of these and a few other parts for my m4, and I should be installing it tomorrow night, my first mosfet, got a new prometheus barrel, 2 buckings(1 backup) and a cnc maxx hopup chamber along with gate aster, so should be fun lol, I've never liked taking apart my gearbox, just annoying to put back together even though I have quick change spring
@@GateMovies Ok and i bought one yesterday and i already install it. Tbh i really love it and im so happy that i bought it. I saw people having proble with it, but i hope my is gonna be okay. Thank you for you product!
Besides protection of electronics, battery and the motor, you get tons of useful functions such as binary trigger, burst mode, active brake and other essentials. Please check our website for more details gatee.eu/aster-v2.
TITAN is the best choice for advanced and professional players with mid-, high-, and extremely-tuned AEGs. On the other hand, ASTER as a younger brother of TITAN ETU was designed to give you a tactical advantage at an attractive price in stock, low- and mid-tuned AEGs. One of the main differences between ASTER V2 and TITAN V2 are different sensors.
We do not guarantee the compatibility of MOSFETs and ETUs such as TITAN or ASTER with brushless motors. The connection of a brushless motor can cause immediate damage to the device, motor, and battery.
If you are referring to the standard V2 gearbox, then yes. ASTER front wired will fit inside. Together with the standard MP5 trigger which you already have in your replica, it will be great!
AUG replicas have two stage trigger. If you like, you can select this option in any other replica with ASTER or TITAN. Enables you to set two different trigger sensitivities. Pulling the trigger slightly produces Semi or Burst fire. Pulling it further produces Burst or Auto fire.
When I go to calibrate for the first time all it does is do the 3 vibrations when I plug it in. After than no matter how many times I pull the trigger it doesn’t do anything
@@GateMovies so a few things. The three vibrations work now, I cannot reach the site on any device, the calibration does not work at all, and whenever I pull the trigger once on semi it fires non stop out of control
@@maverickfleischer6072 Please write us an email at support@gatee.eu or contact us via a direct message on our Facebook facebook.com/gatee. We will guide you through the process.
I’ve installed multiple of these mosphets, but their is something entertaining and calming about the gate videos that always has me watching them.
Thank you 🤩!
My gearbox locked up after calibrating it. The battery is fully charged, does anyone have any tips
I am going to be installing my first Gate (Aster) tomorrow, glad I splurged for the quantum trigger for the maiden voyage.
How was your Airsoft replica work after the new upgrade?
It is fantastic, quantum trigger is well worth it. I am loving the new capabilities of this replica.
did you make a version of this video of the V3 aster?
Yoooo I’m Installing one in my trident today, the timing
Great news! 🚀
I had an odd issue with my g3. It would fire a few normally then would become erratic at reading trigger presses so wouldnt fire all the time.
I put the sticker on the fire selctor plate even though it was copper and that fixed it. Diagnostics said the fire selector had been changed whilst firing
Every replica is slightly different, that is why we are always happy to help. In case of any technical issues, just drop us an email at support@gatee.eu - we will help!
Thank you, I just installed mine today, very pleased
I just installed an Aster in my Cyma Scar and it works great, but it’s seems I forgot to apply the gearbox sticker. Should I open it up again to install the sticker even if it’s working fine?
I’m using a Retro Arms silver/aluminum trigger if it matters. Thanks
You don’t put the safety lever back on right?
We didn't put the safety lever back, but you can do it during your installation.
what about semi lock dmr?
how to calibrate the boy
its all fun and games until it just simply stops responding and they tell you oh well. This unit should not need an additional $70 just to reset calibration.
Will you guys ever do an Aster/Titan V3 install tutorial?
Sure, the installation video for V3 is in our plans. Stay tuned.
Is trigger safety lever has to be removed in Krytac's?
We didn't put the safety lever back, but you can do it during your installation.
Will this work with the Ver 2 eSilverEdge gearbox?
Yeah
No, since e-Silver Edge has different layout.
When we want to install krytac natilius gearbox, is it necessary to perform gearbox operation?
I saw on Evike's page it says no gearbox modification is required to install an Aster. Is this true? Say I wanted to install one in a CYMA Platinum, which is famous for having bad MOSFETs and not being able to install a TITAN.
In case of any technical questions, please contact our support at support@gatee.eu - our specialists will help you!
If you have the quantum trigger do you still need to file down the gearbox
No, you don’t need to file down the gearbox. If you are using Quantum Trigger, you don’t need this sticker.
I would like to upgrade my E&C, and my SA-B16 One with this ETU. Do you have any information about the compatibility with the gearbox of these replicas? Thank you in advance
when installing the aster gate do i need to remove the neodymium magnet from the gear? I want to install on a neptune 10?
Hi, I had a problem installing the gate aster. When I finished installing it, and I was programming it, the replica fires in semi 3 shots and then makes a rather strange sound, in auto it doesn't fire or do anything.
I disassembled the replica again to verify that everything was in order and appeared to be in order.
Can you help me? I have a Kwa ronin t6.
Please contact us at support@gatee.eu - we will help you!
by "standard trigger" does that mean i can use my Stock aeg trigger?
Sure, you can use your standard V2 trigger with ASTER V2. After a while, you can change it to a dedicated Quantum Trigger when you will need much more sensitivity levels in your replica.
@@GateMovies on to installation
does it increase trigger response?
Yeah if you program It to
Hi, what is the name of the music in the video? Thank you
How does the spring go back in the selector plate because my spring won’t stay with out the little thing but it’s taken place by the aster?
This spring should not be installed again. In case of any technical problems, please contact our support at support@gatee.eu - our specialists will help you!
Hello. I have a problem with my gate aster v2 beacuse when i plug in my 11.1lipo battery it has 3 beeping sound and then after i cant shoot the gun. thanks for the respons.
same, Ive been told we now need to buy an additional $70 part to reset it\
Damn this guide is excellent
No need to remove bolt-catch nor gearbox modification in new Krytacs while using quantum trigger? Nice job Gate! I wish eather not modify the shell when use standard trigger, but it is what it is.
New Titan revisions also not need to modify the shell or you plan to develop new versions adjusted to Krytac's gearboxes?
Yes, while installing ASTER you do not need to modify Krytac gearbox or remove bolt catch 🔥. TITAN requires modification in these gearboxes.
How to recalibrate if it's stuck on full for semi
Awesome, will have to come back to this video tomorrow when I get home, we flew out to Cali from wv, and while we were here we stopped by Evike and picked up one of these and a few other parts for my m4, and I should be installing it tomorrow night, my first mosfet, got a new prometheus barrel, 2 buckings(1 backup) and a cnc maxx hopup chamber along with gate aster, so should be fun lol, I've never liked taking apart my gearbox, just annoying to put back together even though I have quick change spring
if you have any type of priprioatary gun you will always not ;like it
absolutely amazing and enjoyable.
Thank you for your kind words, we appreciate it!
Hi, if we install the quantum trigger, can we still install the gearbox sticker or we really have to take it off?
While using Quantum Trigger, the gearbox sticker is not needed, and it is better not to install it.
@@GateMovies Ok and i bought one yesterday and i already install it. Tbh i really love it and im so happy that i bought it. I saw people having proble with it, but i hope my is gonna be okay. Thank you for you product!
@@airsoftasian5396 Thank you, we appreciate it!
Will I lose my bolt hold feature on my krytac if I install the aster ?
What does it do for the gun?
Besides protection of electronics, battery and the motor, you get tons of useful functions such as binary trigger, burst mode, active brake and other essentials. Please check our website for more details gatee.eu/aster-v2.
Is there really any difference between the aster and the titan?
TITAN is the best choice for advanced and professional players with mid-, high-, and extremely-tuned AEGs. On the other hand, ASTER as a younger brother of TITAN ETU was designed to give you a tactical advantage at an attractive price in stock, low- and mid-tuned AEGs. One of the main differences between ASTER V2 and TITAN V2 are different sensors.
I already have aster installed. Do i still need to remove the white sticker in the gearbox if im gonna use the quantum trigger?
The best practice is to remove the sticker. This way, the readings will be most accurate.
Does the aster work with the option 1 brushless motor?
We do not guarantee the compatibility of MOSFETs and ETUs such as TITAN or ASTER with brushless motors. The connection of a brushless motor can cause immediate damage to the device, motor, and battery.
no, the evike reviews said it kills both a titan and aster
So if I bought the quantum trigger do I need the app to adjust the trigger pull?
Yes, to adjust trigger sensitivity, you need to connect your ASTER to GCS App.
I new to internal upgrades but do you have to solder this at all?
Are you supposed to connect a fuse?
For safety reasons, we always recommend using a fuse.
I dont like how the motor wiring is back to fron ton the aster, its nice apart from that though
Did you not install the spring?
Of course we did :). Installation of the spring is here ua-cam.com/video/HBJQnQZVGK0/v-deo.html
Will this work on a cyma front wired mp5?
If you are referring to the standard V2 gearbox, then yes. ASTER front wired will fit inside. Together with the standard MP5 trigger which you already have in your replica, it will be great!
What’s aug type?
AUG replicas have two stage trigger. If you like, you can select this option in any other replica with ASTER or TITAN. Enables you to set two different trigger sensitivities. Pulling the trigger slightly produces Semi or Burst fire. Pulling it further produces Burst or Auto fire.
When I go to calibrate for the first time all it does is do the 3 vibrations when I plug it in. After than no matter how many times I pull the trigger it doesn’t do anything
Please contact us at support@gatee.eu - we will help you!
@@GateMovies so a few things. The three vibrations work now, I cannot reach the site on any device, the calibration does not work at all, and whenever I pull the trigger once on semi it fires non stop out of control
@@maverickfleischer6072 Please write us an email at support@gatee.eu or contact us via a direct message on our Facebook facebook.com/gatee. We will guide you through the process.