In-depth iPad Pro Logic Board Diagnostics. How To Fix an 11in iPad A2377 that is not charging

This iPad Pro 11in, 3rd Generation came to me for repair after the customer tried to repair their own iPad by replacing the USB C Charging Port. After replacing the port, it turned on, but wouldn’t charge, so he sent it to us here in Las Vegas, to fix it.
If you need your iPad repaired, send me a message for a quote: www.vccbr.com/me
First thing we noticed was that the iPad was fully turning, but would shut off instantly after unplugging the charger. This clued me into the battery being bad. Sure enough, it was flat at 0V.
So I walk through the process of jump starting the iPad battery to get some life out of it.
Now it’s stuck on the low battery symbol forever. USB meter is drawing very low current. About 0.03A.
This is not good. The USB meter should be drawing 15V and 1-2A.
Since we’re seeing 15V charging, this tells me the USB C controller (CD3217) is working properly. So my focus would be on the battery connector.
Sure enough, I found the battery connector was damaged from the DIY repair attempt. There was a missing battery pin.
I replaced the battery connector & the iPad is now fixed. It is charging at 15V and 2A, which is about 30W in charging.
Let me know in the comments, what you learned from this video!
Here’s the list of tools I used in this video:
⭐USB C Meter: www.vccboardrepairs.com/usbcm...
⭐USB C 15V Charger: www.vccboardrepairs.com/brick
⭐183C Leaded Solder Wire: amzn.to/4dthLS9
⭐138C Super Low Melt Solder Wire: www.injuredgadgets.com/mechan...
⭐The BEST Solder Wick: amzn.to/49RpA16
⭐Fluke Multimeter: amzn.to/3UwBIyK
KORAD DC Power Supply: amzn.to/45Qxjvc
⭐ Dual Soldering Iron Station: amzn.to/47RV4Dt
⭐ JBC C210 Knife Tip: amzn.to/47RV7PF
⭐ Atten Hot Air Station: amzn.to/3tjYIYl
⭐ Microscope: amzn.to/48coNYN
▶Here are some other tools I have tested & fully recommend: www.vccboardrepairs.com/gear
▶Subscribe for more phone repair tool reviews & tutorials: ua-cam.com/users/vccboardrep...
▶Need a repair? Or need to recover your data? Request a quote: www.vccboardrepairs.com/conta...
▶Useful Links◀
Crowdsourced repair solutions: repair.wiki/w/Repair_Wiki
Join my Locals Community: vccboardrepairs.com/locals-co...
30 Day Microsoldering Starter Course: vccboardrepairs.com/solder-co...
90 Day Advanced Solder Course: vccboardrepairs.com/90-day-co...
Buy a shirt: merch.vccboardrepairs.com
▶Phone Repair Videos◀
Microsoldering Repair Videos: • How To Fix iPhone 13 w...
Data Recovery Tutorials: • Where To Copy Your iTu...
Phone Repair Tool Reviews: • LIVE! iPhone 6S Plus O...
▶Best Thermal Cam Setup◀
Seek Compact Pro: amzn.to/34I4whX
Seek Stand: vccboardrepairs.com/buy-seek-...
Seek Macro Lens: www.vccboardrepairs.com/buy-m...
▶Social Media◀
Facebook Group: vccboardrepairs.com/vcc-fb-group
Facebook Page: / vccboardrepairs
Instagram: / vcc_board_repairs
TikTok: / vcc_board_repairs
▶About VCC Board Repairs◀
We are a Las Vegas, NV based repair shop who offers mail in repair services for microsoldering repairs & data recovery. Our specialty is iPhone, iPad, Samsung and other mobile devices. We also offer B2B pricing for repair shops. Contact us today for a quote: www.vccboardrepairs.com/conta...
▶Affiliate Note◀
This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!

[@VCCBoardRepairs]

If you want to diagnose these properly, you need the right charger & meter. Get them here:
⭐USB C Meter: www.vccboardrepairs.com/usbcmeter
⭐USB C 15V Charger: www.vccboardrepairs.com/brick

[@ExzeroX]

It's good to see that you have the same issue with these as I do, The amount of shops that have sent me a iPad not charging after a charge port replacement, for me to find that same pin snapped off. I wonder how they even do it. One thing I do when I am trying to isolate the battery is I use an screen separator card (like a plastic card) or I use a new battery plastic insert from the cardboard packets the battery cells come in, and chop them to side of the battery connector and shove them in there, that way, no damage to the connector, board or battery and the iPad is isolated.
When it came to boosting battery's back to life, I started out doing it like you did, then I got lazy, and just super glued solder wick to the plastic strip I use to isolate the battery and just connect the power supply alligator clips to that, saves having to hold the probes on.

[@VCCBoardRepairs]

💯💯💯

[@temyraverdana6421]

A very useful video. Thanks
A question. After this deep discharge. is it better change the battery too?

[@haliimaaxmed]

thanks jesse i am more interest with iphone repairs but this one also is good

[@VCCBoardRepairs]

a lot of these concepts are universal. so you can apply it to iPhone as well

[@Kadot7599]

Respect. You're a really good technician

[@VCCBoardRepairs]

I appreciate that!

[@rafiksaIN]

After swapping board m1 ipad pro is not charging, any suggestion whats the issue

[@VCCBoardRepairs]

Check CD3217

[@chrisjohnsonnagbe775]

Master pls
Any update on how to 😢increase battery 🔋 life

[@VCCBoardRepairs]

idk

[@saltcityrepairs5121]

👐

[@VCCBoardRepairs]

Thank you very much!

[@eyelon2216]

just solder a sim reader pin. take pin from old phone

[@VCCBoardRepairs]

No, that's ghetto

[@eyelon2216]

@@VCCBoardRepairs i know you do professional job. ill do that with cheep customer.

[@krzysztofbednarek979]

Hahaha ;) good job

[@VCCBoardRepairs]

Thanks ;)