I just want to know if i could use a logic board from ipad model A1474 and put it on ipad mini model A1432 please help me im stuck on i cloud activation.
My iPad Pro 10.7 began restarting when I moved it in certain ways and eventually it stopped turning on altogether so I took it to the Apple Store and they looked at it and saw that it was bent. They told me that they would not be able to fix it but they would have to replace it as they no longer take iPads apart to fix them. The employee explained to me that the reason that my iPad may be restarting when it was moved is that due to it being bent if certain parts inside the iPad are now touching, it can stop the iPad from turning on or cause the iPad to restart. I therefore took the iPad home and decided to try and bend it straight to see if that made a difference and to see if it stopped whatever may be inside the iPad from touching and causing it not to work. I was worried that bending the iPad straight may break the screen but I gave it a go anyway. I bent the iPad back straight and then put the iPad on charge overnight. I took the iPad off charge in the morning not expecting to see it working but the iPad was fully charged at 100% after not being able to turn on for about two months. Now the iPad works perfectly fine. So to anybody out there who might have a bent iPad that doesn’t turn on try and bend it back straight and see if that works. I did not notice that the iPad was bent before taking it to the Apple Store. If for any reason your iPad is not turning on or randomly restarts check if it’s bent and if so, try to gently bend it back straight and it may start working again!!!
Hi I got issue on my iPad 7 just upgraded to 17.4.1 then restart and stuck on the logo, Apple Store diagnosed logic board problem, so for you experience what cause the problem?
Hello, I think this is what is wrong with my ipad pro 12.9 5th generation A2229, do you know where I can locate the schematics for the logic board? All of my research has come up empty.
hello sir, I have an ipad 7th gen thats dead, stuck on .60 amps, checked for shorts no short on motherboard, 5v,3v are available , replaced the tristar still nothing, what could be the issue? any help would be highly appreciated thankyou!!
Sir, i swap board ipadpro11 to another, but now problem is rotate screen! If keep vertical it shows horizontal, if keep horizontal it showing vertical 😇 what is the issue pls help?
Hi, I have just come across your channel and think you are really good in what you do! I am now a subscriber! I was trying to research this problem I'm having with my daughter's iPad 6th gen wifi, when I saw your channel. Her iPad is disabled because she messed around with the passcode. I have tried connecting to itunes/Finder but when attached to my Macbook, nothing happens. It is as if the computer does not detect the iPad. Because of that, I am not able to go into Recovery Mode. The iPad just keeps looping on and off and finally back to the "iPad disabled connect to itunes" screen. I have tried this with two Macbooks, my wife's Windows laptop and several different charging cables so I know these are not the issue. I thought it was a hardware problem (the lightning port) but the iPad could still charge using the wall outlet, just not on any of my computers. I am not based in Malaysia, otherwise I would gladly send it to you for repair. Wondering if you are willing to share what you think is the problem before I send it off to the repair shop (not Apple store).
Hello please help me ive been to so many places and they all tell me its a logic board problem not my battery imwilling to pay anything to get mine fixed i have so many photos i need from my ipad please respond ive emailed you
Have a ipad 4 with 99.7% no touch movement, just a few seconds it moves , so maybe a very resistant touch filter with high resistance?. I cant see and blown or dark coloured ones and my tips are way too big to test these really tiny components! haha Already reinstalled back to factory reset so dont think its software related and tried another working screen. So will have to keep working on it..
Excellent video. Thanks for posting. Facing a similar issue with A1893 (ipad 6). Drawing current but not charging. Tristar & dockflex testing fine with tester. Very likely will be a bad cap and will confirm with thermal camera.
hello brother i got normal values when testing the tristar dock testpoints with multimeter. it pulls only .45amps no power on? what do u think is the issue? no water damage or drop its very clean i inspected board under camera
could you please tell me the best place to buy logic boards? I want to buy old parts to intergrate Ipad LCD and into my desk seamlessly. if you get what I mean?
This is the awesome video and I love it. Thank you for sharing. But where can I get that thermal camera connector like the one connected to your iPhone in this video? Schematic on computer?
Hi Lim, i am very interested on the type of mosfet , as I dun understand why it become short when entering voltage(without pressing the on/off switch)....unless it is depletion type, isn't it?
2:15 to cek point positive
4:55 double cek tools ( rtb and btr)
21:42 for turn on power
Would you recommend the Sugon t26, Jabe ud-1200, Aifen A9 Pro 3in1 , Aifen a22 3in1 or the Aixun t3b?
I think I have exactly that fault. Do you know the specs of the cap? Because I don't have another scrap pad that I could butcher... ;)
I have this exact model and apparently it's prone to have the charging circuit to short on a lot of models.
Thats great sir, so inspire. Sir can you help me by give ipad mini 6 schematic for free. Thank you for your help
I just want to know if i could use a logic board from ipad model A1474 and put it on ipad mini model A1432 please help me im stuck on i cloud activation.
Welcome back lim we missing you 🌹
such a Great SOP, such a great work Mr Lim
I got the same problem with board, but the tech chose to replace it so the serial number and storage also change 😢 pls help
Great video step by step thanks 😊
ipad pro 11 2018 LTE, no work camera no flash, no work front camera, any ideas where to start???
great idea thermol cam
ZXY havent updated for loong time:( you look at other software all ipad are there, GOOD video my good sir , greetings from south africa :)
U sure? Normally if Apple doesn't leak the official schematic, then no software can label the parts.
A lot of knowledge
Another amazing video my master.
When will u start online classes master
Great video. What voltage did you use to test the short?
Low. 1V. Whenever such boards draw current at 1V a short must be suspected. Because nothing on there would start up at such low voltage.
great work boss 👍🏽
Do more videos sir ❤️👍
Lim you are a master at you work, please keep putting out content as I’m learning so much from you !!
Many thanks from the Uk 🇬🇧
❤️❤️🎉
你好
My iPad Pro 10.7 began restarting when I moved it in certain ways and eventually it stopped turning on altogether so I took it to the Apple Store and they looked at it and saw that it was bent. They told me that they would not be able to fix it but they would have to replace it as they no longer take iPads apart to fix them. The employee explained to me that the reason that my iPad may be restarting when it was moved is that due to it being bent if certain parts inside the iPad are now touching, it can stop the iPad from turning on or cause the iPad to restart. I therefore took the iPad home and decided to try and bend it straight to see if that made a difference and to see if it stopped whatever may be inside the iPad from touching and causing it not to work. I was worried that bending the iPad straight may break the screen but I gave it a go anyway. I bent the iPad back straight and then put the iPad on charge overnight. I took the iPad off charge in the morning not expecting to see it working but the iPad was fully charged at 100% after not being able to turn on for about two months. Now the iPad works perfectly fine. So to anybody out there who might have a bent iPad that doesn’t turn on try and bend it back straight and see if that works. I did not notice that the iPad was bent before taking it to the Apple Store. If for any reason your iPad is not turning on or randomly restarts check if it’s bent and if so, try to gently bend it back straight and it may start working again!!!
Hi I got issue on my iPad 7 just upgraded to 17.4.1 then restart and stuck on the logo, Apple Store diagnosed logic board problem, so for you experience what cause the problem?
Hello, I think this is what is wrong with my ipad pro 12.9 5th generation A2229, do you know where I can locate the schematics for the logic board? All of my research has come up empty.
hello sir,
I have an ipad 7th gen thats dead, stuck on .60 amps, checked for shorts no short on motherboard, 5v,3v are available , replaced the tristar still nothing, what could be the issue? any help would be highly appreciated thankyou!!
Sir, i swap board ipadpro11 to another, but now problem is rotate screen! If keep vertical it shows horizontal, if keep horizontal it showing vertical 😇 what is the issue pls help?
Great to see you’re back, I really missed your videos. Great video as always.👍
Hi, I have just come across your channel and think you are really good in what you do! I am now a subscriber!
I was trying to research this problem I'm having with my daughter's iPad 6th gen wifi, when I saw your channel. Her iPad is disabled because she messed around with the passcode. I have tried connecting to itunes/Finder but when attached to my Macbook, nothing happens. It is as if the computer does not detect the iPad. Because of that, I am not able to go into Recovery Mode. The iPad just keeps looping on and off and finally back to the "iPad disabled connect to itunes" screen. I have tried this with two Macbooks, my wife's Windows laptop and several different charging cables so I know these are not the issue.
I thought it was a hardware problem (the lightning port) but the iPad could still charge using the wall outlet, just not on any of my computers. I am not based in Malaysia, otherwise I would gladly send it to you for repair. Wondering if you are willing to share what you think is the problem before I send it off to the repair shop (not Apple store).
Hello please help me ive been to so many places and they all tell me its a logic board problem not my battery imwilling to pay anything to get mine fixed i have so many photos i need from my ipad please respond ive emailed you
Well.. Human nature broke my ipad's IC. I still hate it.
Holy crap! where did you get that schematic from? do they have them for all ipads?
hi which thermal camera is good for repair?
I have learn to many things.If i have money i will come to meet you
hi, which thermel camera are you using, please?
Very impressive! You're very skilled at this! Thank you for sharing your knowledge!!
How can contact you and send my ipad to be repaired by you?
Where can I find the iPad motherboard schematic?
Nice job
microscope light link send me bro
hi brother.. is it possible to install new cpu on ipad 7(10.2)
i got new A10 cpu when i install its not getting flashed
6s dead nand, any way to get gsx data quickly
Hi bro I have a1822 dade no shorts
?
Hard work and repetitive task over time
Have a ipad 4 with 99.7% no touch movement, just a few seconds it moves , so maybe a very resistant touch filter with high resistance?. I cant see and blown or dark coloured ones and my tips are way too big to test these really tiny components! haha Already reinstalled back to factory reset so dont think its software related and tried another working screen. So will have to keep working on it..
Excelelnt work.
Histori google
very good video excellemt
Hello, to check if the motherboard of the iphone 5s works, if it works, how much energy should the multimeter show me? Thanks.
Excellent video. Thanks for posting. Facing a similar issue with A1893 (ipad 6). Drawing current but not charging. Tristar & dockflex testing fine with tester. Very likely will be a bad cap and will confirm with thermal camera.
hello brother i got normal values when testing the tristar dock testpoints with multimeter. it pulls only .45amps no power on? what do u think is the issue? no water damage or drop its very clean i inspected board under camera
could you please tell me the best place to buy logic boards? I want to buy old parts to intergrate Ipad LCD and into my desk seamlessly. if you get what I mean?
This is the awesome video and I love it. Thank you for sharing. But where can I get that thermal camera connector like the one connected to your iPhone in this video? Schematic on computer?
Sir can u plzz suggest me that which thermal camera is better with affordable price according you...
Great video master 👍
Hi Lim, i am very interested on the type of mosfet , as I dun understand why it become short when entering voltage(without pressing the on/off switch)....unless it is depletion type, isn't it?
good job master
Best video I have seen so far…thank you! Where did you obtain the software / schematics?
Great video.
Hi master
How r u
Hi thanks for the video. I have the same camera it's making noise like camera shutter all the times. It's normal? Or should I return it?
Sir, your videos are very much helpful, pls make a video about reballing dual layer CPU , thank you ❤️
Thank you 💫
These videos are a LOT less annoying to watch when there's no music.
Hi/ great video/ i very like/
give link pls that microscope cam you use?
Great as usual... sir m happy to see u again with a rare issue.. sir i request u plzz share your work on daily or after 2,3 days plzz !!
Thank you very much for sharing. Helps a lot! KUDOS!
Please continue to upload videos. It was easy but exact explaining like a pro. Thanks
Love from India
you just "Open my Mind"...the first key on Learning...THANK YOU Lim..
I always watching ur video..and learn more about step by step how to repair ..god bless and more video
Nice video and nice music master Lim , Thanks!
please can you say how many thermtal camera you used in this vedio
one
@@iPhoneServiceMalaysia sorry how money $
Thanks for sharing. Hope to see more complicated cases from you.
The last part sneak peek cases... the panic report you had is very interesting.
Btw where are you from in malaysia
www.iphone-repair.my/contact-us-2/
Halo broooo
can't wait to watch your next video.
Does the silent slider gives any sign to replace the battery?
Thanks for the video Lim.
Is iPhone and iPad training course different?
Don’t have ipad courses. But they are similar. About 95% circuit design is similar to troubleshoot
Thanks a lot for your positive reply.
Nice videos Lim, would be great to see more of you.
What a skilled guy! so much simpler than the other stuff you see online.
Good video. Great effort. Am ur biggest fan
Hi Lim. Nice video again.
very quick and easy! thank you for this tutorial
Thank you for sharing..👍🏻😊
Eagerly waiting for your videos every day
Thanks for new video ...i miss it
Nice to see you my friend 😍😍
thanks for sharing your knowledge
Greetings from Colombia
Sir Thearmal camera model plz
Good to see you again sensé. Greetings
master prof welcome back
Welcome back sir lim.☝️☝️☝️☝️☝️
It's really great job boos
You're Awesome boss
Very good you are great 👍
Masterclass like always.👍👍👍
Sir you are great teacher
Thanks for sharing
Good Job, great!
Great bro👍👍👍👍
Innovative video❤️❤️❤️