This was great. My son has worn out the charging port and I am contemplating doing this eventually. For now putting pressure on the side of the charging cable gets it to start charging.
alcohol use is a great way to disassembly the ipad. but using metal tools is a bit dangerous to lift the glass/LCD. prefer to use thin plastic tools, you can put an entry barrier of 1-3mm so you don't hesitate to slip the tools and damage the LCD. Also, when you find double-sided LCD glue, you can cut and pull it gently following the glue. This can be very helpful in opening the LCD without having to use too many tools. Since the iPad Pro lcd has a small space to stick to the body, gently pulling the double-sided tape glue is a very safe way to open the iPad. pull a little with tweezers, add alcohol, and so on. it's a great video by the way, good job.
@@VCCBoardRepairs Yes, that's right, correct technique is very necessary. but choosing the right tools will greatly minimize the risk. especially when dealing with thin glass materials😁
This video gave me hope because my iPad is out of warranty and service centre is costing a lot for replacement . What do you think the issue is with my iPad Pro 11 m1 because it charges but sometimes it stops charging because of heat, , but the battery back up is around three hours. At the same time. The battery health is 92%. Also, recently I noticed that my pen drives are not working unless I connect them through a powered type C hub .
Hi Jesse, I just refurbished a 12.9 3rd gen a few days ago which is essentially the same process. After gluing back the screen like new, realised the USB C port, charges only from one side and not the other. The type C metre turns on and shows 30W charging on one side, but does not turn on from the other. You think it's worth taking apart again and re-gluing just to replace the port since it charges normally from one side?The new Qianli carbon fibre opening / prying tools are really cool
Quick question. I’m trying to purchase some chips but haven’t been able to and was wondering if you can help me. It’s the ROM IC for the cd3217b12, not the cd3217b12 as I have loads of those but the little ROM IC chips. Do you know the part number for those or have a link for them please? I’ve been on Ali but can’t find them. Really stuck and need help. Thanks rich
@@VCCBoardRepairs thanks , it’s just the donor iCloud locked boards vary price and availability every time. Just trying to find a more better long term solution. Thanks Jesse, really appreciated.
What tools did I use? Here's a full list!
⭐ Heat Pad: amzn.to/3QUT349
⭐ 45W USB C (PD) Charger: amzn.to/467Pz2v
⭐ USB C Meter: amzn.to/3xrvQeT
⭐ Mechanic T-824 USB Reader: www.mobilesentrix.com/mechanic-t-824-mobile-phone-tail-insertion-detector-no-disassembly-required
⭐ Tristar Tester for lightning iPads: www.injuredgadgets.com/smartmod-pro-tristar-tester-version-3/?acc=3d2d53e5abcd70e24cc444935b88e6ac21
⭐2uul Blade Screen Opener: www.injuredgadgets.com/2uul-x-blade-durable-screen-opener/?acc=3d2d53e5abcd70e24cc444935b88e6ac21
⭐ iFixIt Guitar Picks: amzn.to/3QTZ3tY
⭐ iPlastix Separator: www.mobilesentrix.com/iplastix-lcd-touch-screen-separation-repair-opening-tool
⭐ Suction Cups: www.mobilesentrix.com/suction-cup-powerful-lcd-opener
⭐ Magnetic Pad: ebay.us/cdmiGD
⭐ 99& Isopropyl Alcohol: amzn.to/46blbnT
⭐ Needle Drip ISO bottles: amzn.to/3QRCIgj
⭐ Gloves: amzn.to/3MzZF56
⭐ Fine Tip Scissors: amzn.to/3QSzERj
🛠 REWA REFOX Screwdrivers: bit.ly/47V6w1F
🛠 Magnetic Base: bit.ly/47UpfKP
Thanks jesse you are the real master to teach us with each and every little things included thanks again
I appreciate that!
This was great. My son has worn out the charging port and I am contemplating doing this eventually. For now putting pressure on the side of the charging cable gets it to start charging.
Just be careful! The screen is super expensive
Insightful Vid! Thanks for doing alot of leg work and being a voice and light for the repair community my friend!
That's a master job really Helpful and detailed step by step instructions . 🙌
Glad it was helpful!
We use Playing cards to cut the adhesive and for insertion to keep separation. Extremely safe.
Those work well too!
alcohol use is a great way to disassembly the ipad. but using metal tools is a bit dangerous to lift the glass/LCD. prefer to use thin plastic tools, you can put an entry barrier of 1-3mm so you don't hesitate to slip the tools and damage the LCD. Also, when you find double-sided LCD glue, you can cut and pull it gently following the glue. This can be very helpful in opening the LCD without having to use too many tools. Since the iPad Pro lcd has a small space to stick to the body, gently pulling the double-sided tape glue is a very safe way to open the iPad. pull a little with tweezers, add alcohol, and so on. it's a great video by the way, good job.
Metal tools is only dangerous if you don't follow the right technique.
@@VCCBoardRepairs Yes, that's right, correct technique is very necessary. but choosing the right tools will greatly minimize the risk. especially when dealing with thin glass materials😁
Do you replace with new adhesive strips before closing or does it complicate the closing because it requires precise alignment on the firs try?
Great advice and technique! Thanks
Glad it was helpful!
Thanks for the video! Could this also apply to the iPad Pro 12.9" 6th gen?
Definitely!
Great Video, Thank you.
Glad you liked it!
Great video and great watch as always jesse. Merry Christmas, hope you have a great one and a happy new year. 🎉
Same to you!
Hi Jesse,
Very nicely done! I sent you a message for a quote on repair for my I pad Pro Charge port😊look forward to having you fix my I pad
Great video,
Thank you! Appreciate the support!
why do you heat from the back and therefore through all of the electronics and solder joints on the MB.
To safely open the iPad
This video gave me hope because my iPad is out of warranty and service centre is costing a lot for replacement . What do you think the issue is with my iPad Pro 11 m1 because it charges but sometimes it stops charging because of heat, , but the battery back up is around three hours. At the same time. The battery health is 92%. Also, recently I noticed that my pen drives are not working unless I connect them through a powered type C hub .
Sounds like a bad charging port. If you're in the USA, send me a message for a quote: www.vccboardrepairs.com/contact-us
@@VCCBoardRepairs unfortunately, I’m not in the US, thank you for the information, though. I’m glad to know that it can be fixed. Thank you very much.
Hi Jesse, I just refurbished a 12.9 3rd gen a few days ago which is essentially the same process. After gluing back the screen like new, realised the USB C port, charges only from one side and not the other. The type C metre turns on and shows 30W charging on one side, but does not turn on from the other. You think it's worth taking apart again and re-gluing just to replace the port since it charges normally from one side?The new Qianli carbon fibre opening / prying tools are really cool
Yes I would open fix it
Thank you for rish videos .. would you mind tell me where can I find your black gloves?🙏
You can buy them here: amzn.to/4aK8pA8
@@VCCBoardRepairs thank you so much 🌹🌹🌹
I use an iSclack. Haven’t broken an lcd in years
Nice!
Quick question. I’m trying to purchase some chips but haven’t been able to and was wondering if you can help me. It’s the ROM IC for the cd3217b12, not the cd3217b12 as I have loads of those but the little ROM IC chips. Do you know the part number for those or have a link for them please? I’ve been on Ali but can’t find them. Really stuck and need help. Thanks rich
Donor boards is the best place. I haven't found anywhere else
@@VCCBoardRepairs thanks , it’s just the donor iCloud locked boards vary price and
availability every time. Just trying to find a more better long term solution. Thanks Jesse, really appreciated.
The best opening tools in my country is nail fingers😂😂
haha that could work too
What does this repair cost?
Prices varies by model. But usually starts at around $149 and goes up from there
omg yes, my ipad pro 11” stop charging with apple charger. it sucks cause i got all this cool ipad stuff. its breaking my heart
We can fix it! Send us a message for a quote: www.vccboardrepairs.com/me
thanks for your information jesse i have one question does the repair business have future thanks
Yes it does
CC 😅 como 😊
Huh?
Just buy a Magic Keyboard and use magnetic charge
What's that cost?
Very detailed operation, thank you for sharing, if you are interested in repair tools, please contact me.
Thank you!