How to change the lower Control Arm / Ball Joint on a 2012 - 2019 Nissan Versa / 2015 - 2016 Micro.
Вставка
- Опубліковано 23 сер 2024
- I had to change the lower control arm including the ball joint on a 2016 Nissan versa because the control arm bushing was bad and made a clunking noise when the brakes were applied.
AUTOSAVER88 -Front Lower Control Arm w/Ball Joint Compatible with 2012-2019 Versa, 2014-2019 Versa Note and 2015-2016 Nissan Micro.
amzn.to/3FXEPJR
SATA 29 Inch Extendable Indexing Pry Bar with 14 Locking Positions
amzn.to/3G1Rbk7
Astro Pneumatic Tool 1828 ONYX 3/8" Nano Impact Wrench v2 - 500ft/lb
amzn.to/3ZpVzjJ
3/8" Drive Deep Impact Socket Set, 6 Point, 48 Piece SAE and Metric
amzn.to/3lLzkXT
Ingersoll Rand 114GQC Air Hammer - 3 PC Chisel Set with Tapered Punch
amzn.to/3ziQ3Vw
Chicago Pneumatic A046074-7-Inch Straight Punch
amzn.to/3Zs2SYh - Авто та транспорт
This was a super awesome and helpful video. That forward bolt was kicking my butt. Phew ! I had the idea of turning it upside down. But the one part where you prayed on the lip was pure gold . I sat for 3 hours thinking the part was defective. Pryed on the lip took me and my brother 15 minutes. Lol I want that pry bar 😂Thanks so much for making this video you saved me. All I could do was laugh at myself. That is the hardest part of the job. Thanks so so much . Video was perfect!
That was great thanks for the instructions, Camera and lighting were perfect
Excellent work, Video, and Explanation! Great quality job!
Thanks for the nice comment.
How great would it be to have a lift! And a shop to put it in! Some day, thanks again!
Thanks so much video very helpful!!!
thank you for sharing the pry bars
7:49 oww my eye, wise guy..
Very clear and understandable. Shall I tackle it? Must have the tools you mentioned first. Thanks so much.
I would give it a shot. I have faith in you.
Guess I should check the bushings on mine. I don't hear clunks when I hit the brakes but when its wet outside and I have the traction control enabled, any slip from a take off causes the car to clunk jerk. I've never experienced that with any other traction control system on other vehicles I've driven. Usually it traction control will just limit power to the wheels. My Versa is a manual transmission though so it might have a different effect due to that. I haven't gotten an opportunity to test it without traction control enabled on wet roads, its been hotter than hell here in north Texas and no rain.
Not sure if you will see this, but my wife has this same problem on the same vehicle. Where did you order the parts from ? My brother in law is a mechanic but doesn’t speak English so I want him to do it but need to help him find the part. I live in the same area of Texas as you guessing by 737 area code if that matters. Thank you for your help and informational video.
I ordered them from Amazon.
amzn.to/3RFlraR
I bet if you lease a small shop with lift, it would easily pay for itself as you would be extremely BUSY as you do quality work!
The only reason I do this is to help people save money by not being ripped off by dishonest shops. I really want to slow down on doing this kind of work.
@@737mechanic totally understand, but, you are very good at it, patient, and a great teacher, too! Love your videos! Also, I have bought several tools you recommended and also made me a great trans fluid pump with the pump sprayer you showed with aluminum spout. Works great
Or you can just use the jack to press it up yippee ki yea!!