Changed G35 Valve Covers and now my IDLE is LOWER than my GPA
Вставка
- Опубліковано 22 сер 2024
- BEDISTINCT CLOTHING: www.bedistinct...
Changed G35 Valve Covers and now my IDLE is LOWER than my GPA
In lasts video I switched out the spark plugs and the coil packs from my car due to some misfire and turns out there was oil inside my spark plug well. Therefore, we decided to tackle the issue and change the valve covers, but when it came down to turning the car on, well there was unexpected or rather expected surprise.
Need tire lettering: tredwear.com USE CODE “BEDISTINCT” to get Free shipping
Need interior lights: plexyr.com
Need Latino Clothing: mitushop.com USE CODE BEDISTINCT2
Need Lighting: lasfit.com
---------------------------------------------------------------------------------------------------
Connect and Subscribe to my social medias @BeDistinct:
/ bedistinct
/ bedistinct_
email: freemefromschool22@gmail.com
You took off the throttle body. By you unplugging that you have to get it reset. Nobody mentions that in they videos. But great job. I like you adding all these mods. I hate the g's are expensive to get more horses.
Rudolph Navarro that’s true, I definitely should of mentioned that. Thanks for pointing it out.
I agree your not suppose to take it off . Take it off complete with the upper . Unless you wanna waste your time doing a reset
You can take off the throttle body and put it back on and it will be fine. What messes up the idle is if you even slightly touch the butterfly valve is fucked and have to do the relearn.
@@societyplays9943 If you disconnect the battery first, before you unoplug anything. And don't fingerfuck the butterfly valve in throttle body then you don't have to waste your time relearning anything.
@@locomojo0485 i agree ppl.take off the whole harness sometimes and all you do is unplug the battery everything will be fine unless u have mismatched vin crap on ur G your g2g lol
PT.2 of Fixing the G will come probably tomorrow!
BeDistinct you have to do the idle reset since you unplugged the throttle body
Aye can you link the part 2 and why it was idling so low?
Its either vacuum leak or a throttle relearn.
Theres are lot of error in your installation. You dont need to apply the silicone gasket, you can only apply a thin coat on the corner of half moon as long as you torque the bolt in proper spec. The aftermarket valve cover is garbage, the main problem is the sparkplug seal , the oil will leak due to poor quality of seal. You need to reset the ECU by performing the throttle relearn procedure or using the Consult II of Nissan Dealership.
I was guna seal the gasket on too but then i did some logical thinking and talked to a master tech , the sealer will litterally casue a leak 😲😢😤 only dab the timing cracks
I was gonna say nice job but then I saw how he used too much and not just in the cracks. Oh well this is how u learn lol
Best g35 youtuber right here
I had the same issue, u gotta get the tb reset take it to a shop or google the step but honestly I’d just pay to not have a pain to do it .
Idle relearn?
Disconnect your battery for 30min and connect and try again, I think you touched the butterfly on the throttle body
I have the same problem thinking it could be the camshaft sensor my g just died on me yesterday but turns right back on after turning it off
The green flip flop lmao
Where did u get the valver covers ??I need some for my G
You might need to do a throttle body relearn if you took the whole throttle body off the plenum
DGWhipZ that’s what I’m thinking
Look up the throttle reset function. You play with the gas pedal and the ignition and it resets your idle and throttle response.
Would it say multiple misfires?,p0300 and p0011?
Can you please put the link to the valve covers
Love the car man but please don’t tell me you’re mommy and daddy sponsored lol
Chivas Sanchez I wish, I wouldn’t have bought a G35 if I was
Bro did u gap the spark plugs? Or use right ones? , i assume u did those sense u were right there
do you have stock rear taillights? if so do you plan on getting aftermarket ones? and what ones are the best quality on the market rn?
Let’s get to 10K already man!!
Were you order you valve covers ?
Love the video❤️
Dam ur gaskets are all fucked up in the package 😂😂 they gave no fucks.
I have the same problem. But I left the throttle connected to the plenum. Got the p0300. Replaced all ignition coils. Replaced to oem spark plugs. Still same problem.
Ever get this fix I'm getting p0300 code now did everything you replaced anything as well helps.
@lenermaz4546 ughh
.me to..what was the issue?
I want that trunk 🤔
Hmmm 🧐 giveaway? 😂
I just did this on my car. Now they leaking again.. got to do it 2x.
hey bro how much does this cost to get replaced?
Heyyy!!!! I have a question...Idk if you have time to answer it.. but I have an auto 06 G35X sedan, and both valve cover gaskets are leaking, you think I could just replace the gaskets? or should I replace the valve covers too🤔
Change it all, might as well since you’re down there
Idle relearn bro. That should most likely fix the issue.
That’s crazy I just did that today and have the same problem did you find what it was I ain’t trying to pay no mechanic LMK please 😂
What was the hose called that you replaced?
Why don’t u do a throttle body relearn
What valve cover brand is it, for oem cheapest I can find is 425 dollars
It’s called MostPlus from Amazon and I replaced that gasket with a FeltPro from autozone
@@BeDistinct nice bro ty for the sauce. How many miles with this cover? Still solid? Sorry if im buggin
How is the value covers gasket holding up any leaks?
Sold the car since then but it held good last time I had it, no leaks.
@@BeDistinct ok cool I got a 04 in the garage ready for the gasket. I was wondering if so should put the Gasket maker all the way around the block like you did.
Yo how are your most plus valve covers holding up ? any leaking ?
Still holding up good my friend 👌🏽
Lmfaoo that title tho
What valve cover gasket did you put in?
For our G35, we bought Victor-Reinz (Dana) vc gaskets, and I did not even have to put gasket maker to get it to stay in the VCs. I'm quite positive Victor-Reinz was the oem gasket supplier for these engines. I used to be an engineer for Fel-pro and we used to quote annually to supply gaskets to Nissan and the drawings they would send us to quote by always had the Dana logo barely blacked out. They never gave us any of their business, so I'm quite sure it stayed with V-R.
where did you get the valve covers
Mjm635876 they are called Most Plus G35 Valve Covers on Amazon, let me add it to the description.
Hey there BeDistinct. How are your valve covers holding up? I seriously need some, due to my screw from coil pack 1 breaking inside while changing my spark plugs. Peace from Baltimore, MD.
*time to trade it in for a faster car.*
Tewthpaste ima keep it but I am looking into a car already
I was the 100 like let’s goooo
AYEEEEE SUPPPP FUKERSSSS