How to Replace Left Side Valve Cover 2003-2007 Infiniti G35

Buy Now!
New Valve Cover from 1AAuto.com 1aau.to/ia/1AEV...
This video shows you how to install a new TRQ valve cover gasket in your 2003-2007 Infiniti G35. Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere. A valve cover has to have a gasket to stop some of that oil from leaking out the seam. When you do see oil around your valve cover, you know it’s time to replace the gasket.
This process should be similar on the following vehicles:
2003 INFINITI G35
2004 INFINITI G35
2005 INFINITI G35
2006 INFINITI G35
2007 INFINITI G35
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obpr/1A...
• 10mm Socket 1aau.to/obhh/1A...
• 8mm Socket 1aau.to/obhh/1A...
• Trim Tool Set 1aau.to/oaf2/1A...
• Pliers
• Ratchet 1aau.to/obGt/1A...
• Socket Extensions 1aau.to/obBZ/1A...
• Torque Wrench 1aau.to/oaKu/1A...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oEg/1AX...
• Gloves 1aau.to/oaiy/1A...
• RTV
• Safety Glasses 1aau.to/oabr/1A...
• Magnet - Extendable
• Razor Blade / Gasket Scraper 1aau.to/ojL/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@glenorr3387]

I am about to tackle replacing my valve cover gasket on a 2003 Infiniti. I have avoided it for two years, but your video has given me renewed confidence to get it done. Thanks.

[@tsunade20031]

Can you do the right side😂. And can you show how you placed the gasket on that valve cover with ease? I've seen so many people use different techniques. Wish you had shown how you did it without it going all over the place. Great videos, though. Especially that you reminded how much to torque the bolts.

[@alfredoviera8272]

Bery well explained video.
Thank you 🙏🏽

[@Jay.McCarty]

Watching you miss that miss that washer at 4:00 and drop it behind the motor at 4:29 gave me PTSD. Great video though.
EDIT: Now that I've watched again. Did you just not use the washers for any of the upper bolts on reassembly. Is this OK to do?

[@ahyungrocks5509]

Thank you. Just finish the same video on the right side.

[@gorilla3]

Best explanation

[@rodnietorres3082]

I have a question about the tube protruding from the valve cover closest to the driver side. I’m pretty sure that’s a pcv breather hose but when I took my valve cover off, it did not have one. Is that normal? Also my air intake did not have a rubber tube under it either. Is that normal as well?

[@user-fx1cm3bu7y]

What is the tightening force for the cover screws?

[@JPDC1991]

Great job .... 😍

[@jevonkhashlive2135]

Hello. Can someone please confirm if the VQ25DE uses the same size rocker valve covers? Thank you.

[@bentleyahrens5241]

Thanks bro

[@user-2Hteyasizyc]

Just take the entire engine apart theory