My Z has been through the ropes with 170k miles on her I’m thinking about doing something once I get a new daily and this is definitely giving me some inspiration
Hey Aaron thanks for sharing this build process I know how much of a pain it is to work and film at the same time as far as me and I'm sure as many other people watching it's mad appreciated. Keep up the good work I will keep watching liking and sharing.
I learned a lot, quite simple to tear down, just time consuming (considering i rebuild transmissions for myself and have for a few friends hondas and g35s autos and manuals) which takes ungodly amounts of research and devotion and being meticulous) I only hate the design of the multiple timing covers on these vq35s. Seems like it has 12 and i only worry of leaks having to rtv those back up. Being meticulous as you are is the key. Thanks for the info.
You inspired me to start tearing into my Z today. I still need to unlace all the wire harness off the trans and unbolt the trans from the engine, unbolt the headers and unbolt the engine. But. I got a move on it today
Let’s go fam I been busy working but I ain’t skipped a beat here you been killin it Brotha 🤟🏽 mad props for all the grind an hustle the uploads hands down my favorite channel to smoke 💨 out an vibe to 💯 hope you an the fam are doing good 🙌🏽
Great video. Hopefully we see the video going back together. Plenty have done the tear down video but not many has follow threw with an assembly vid. Great content 👌
Arran 😅 my man bro I haven't been watching videos man almost done at uti so I just seen your video looks dope on what your doing man I see you're doing good man keep it up
Man great video!!! Keep documenting all these builds , and what ever little or large tasks it takes that go into your builds , you are making great content , my my my !!! Can’t wait for more content from your channel, thx 🙏 for sharing 👍👍👍👍👍👍
Nice im getting my heads clean/resurfaced but unfortunately my valves are slightly leaking so I'm taking them out prior. Sucks because I just put new Viton valve seals smh.
My motor is 30 degrees off if I use the mark on the timing cover. And I verified by shoving an extension in the plug hole during the compression stroke
I have a 05 maxima and I have been having issue with it running close to hot but it never pegs the red. I go up a hill and gauge drops back to normal. Temp sensor replaced twice,thermostat replaced twice, water pump replaced, radiator replaced, fans replaced with runs wide open when it reaches 226 degrees and never cuts off until I turn car off. It runs great no misfires. Never had issue with running hot until I changed thermostat due to no heat idling in the winter. Now I have heat but runs hot idk. Any suggestions???
Does the engine have to be out to do this currently doing a timing job on a new g35 i bought and noticed the headgaskets were blown when i drained the oil to get the front timing cover off
I need to do this on a 2001 Pathfinder 4WD - is it possible to to it without engine removal? I have done it on my 4Runner but this thing is a bit more of a puzzle LOL - from what I understand the coolant crossover pipe can't come out with the engine in , or is there a way to do it?
I'm just curious I just bought a 2005 G35 and I went to replace the fluids and the radiator was filled with water didn't smoke or anything but when I refilled it with antifreeze and drove down just down the block it ended up shooting a lot of white smoke out the exhaust so I'm wondering would that be a bad head gasket
Hey brother thanks for the video. Do you recommend oem or after market head gaskit the Tomei 0.7 is thicker will that effect anything or just go with eBay all gaskit and bolt kit
@@Its_Mike_Myke I was just asking I didnt want the pre workout to go bad! Aaron = Exposed! He cant be leaving stuff all around like that.. I knew there was something about that ninja! 🤣
Hey Aaron I’ve been watching you for a good time now and wanted to ask cause I also have a 350z mine is 2005 and has a blown head gasket could that been a reason why my car won’t start
Amazing content my guy. Im new to this but I was told that you need a special tool to do the timing for the VQ, is that true? I didn’t see you using a tool.
Hey I’ve got a question, I’ve got a M35 and I had just got it tuned and there was an immense amount of oil leaking onto the AC compressor but it’s not the valve covers what do you think it could be? If you’ve gotta Instagram that I could text you on so you could help me figure this out ?
I don't know if u can help me i have an 03 and I just put an engine with 50k miles and i was trying to burp the coolant and after a while the bubbles got violent splashing out of the plastic thing used to burp it so checked compression only cylinder one was the lowest 158 the others are 185 or so do u think it is that head
4:12pm friday November 29th tacoma wa I'm doin the exact motor but when putting in TDC the screwdriver trick piston is up but the marks on crank where the marks are is on the opposite side there pointing bank one the passenger side when standing in front of truck is it possible that someone has had the crank pully off and put it on wrong is that possible i just dont understand why yours on on the side pointing at the plastic cover on water pump mine on opposite side but pizton is up on cylinder one cylinder one bein left side from front of truck anything ypu could tell me id appreciate it.
Hey, what’s up man? Not to insult your intelligence, but are you sure you’re on cylinder number one a lot of people get the side mixed up on which one is cylinder number one. Is it on the correct stroke?
I enjoy your videos. But damn I hate when you stop the camera to remove certain things and bring it back after everything is taken off. Get a tripod so you can record everything.
Vortech has A LOT of different trims, kits and accessories ranging in all levels of price. I am however VERY fortunately sponsored by that amazing company. And no matter what you spend with them. WORTH. EVERY. PENNY. I promise 😈 #poweredbyvortech
@@jamesray9186 dumbest motor ever made? The vq35 is and was one of the most reliable v6s made. With regular maintenance they are known to go past 200,000 miles. You’re talking out of your ass.
Lol , umm you’re kinda acting like the engine being in or out of the vehicle is similar!? Lol the engine being out of the vehicle is a BILLION times easier then what someone would encounter with the engine still in the vehicle. There’s tons of things that have to be moved or removed just to get to the point you’re starting at . Anyway , great video
As someone who owns a DE 350z and everyone telling me its crap. Its nice to see someone working on one in such a detailed way.
Especially coming from a top dog, you can't beat that lol.
You got the most informational VQ channel out here on UA-cam keep up the content 🤘
Thank you thank you brother ❤️🙏🏼 much love always. Appreciate you🤙🏼
@@Thecrookedking15 what typically causes head gasket issues on the VQ engines?
This is a great video, man. I am.a mechanic and.i have worked on this engine and i recommend it for alot.of people doing this first time
My Z has been through the ropes with 170k miles on her I’m thinking about doing something once I get a new daily and this is definitely giving me some inspiration
I completely understand brother. You should def give it a try 💪🏼 lemme know if you have any other questions too. Much love 🙏🏼❤️thank you so much!!
I'm already waiting for part 2. Good job bro
🙏🏼🙏🏼🙏🏼❤️it’s coming
Hey Aaron thanks for sharing this build process I know how much of a pain it is to work and film at the same time as far as me and I'm sure as many other people watching it's mad appreciated. Keep up the good work I will keep watching liking and sharing.
Considering buying a car but wanted to see how complicated it was and honestly with a video as detailed as this I may pull the trigger
I learned a lot, quite simple to tear down, just time consuming (considering i rebuild transmissions for myself and have for a few friends hondas and g35s autos and manuals) which takes ungodly amounts of research and devotion and being meticulous) I only hate the design of the multiple timing covers on these vq35s. Seems like it has 12 and i only worry of leaks having to rtv those back up. Being meticulous as you are is the key. Thanks for the info.
You inspired me to start tearing into my Z today. I still need to unlace all the wire harness off the trans and unbolt the trans from the engine, unbolt the headers and unbolt the engine. But. I got a move on it today
You live life so excellently. Every element.
Discipline. Serious full bodied discipline
I'm living in Kansas right now, and you would be a living God if you lived out here, lol. Great videos, super chill 🔥🔥🔥
Good content white Aaron! I’m excited to see the outcome of the project Z. Your doing great with the channel man. Big supporter
Thank you thank you brother🙏🏼🙏🏼 stoked to be building this channel with so many of y’all. Much love and thank you for the support and kind words🙏🏼❤️🤙🏼
He makes great content right Black Jerry!
Super good content. Your attention to detail is unmatched
So organized and meticulous, nice!
Not into vqs but love to support my boy here! 🔥🔥
You ALWAYS support 🙏🏼🙏🏼❤️means a lot thank you my brotha
@@Thecrookedking15 for sure brotha! As always, keep up the good work. 🤙🏼
Let’s go fam I been busy working but I ain’t skipped a beat here you been killin it Brotha 🤟🏽 mad props for all the grind an hustle the uploads hands down my favorite channel to smoke 💨 out an vibe to 💯 hope you an the fam are doing good 🙌🏽
This was super informative !
I’m so glad to hear man thank you 🙏🏼 ❤️
Good video ...informative for sure. Keep up the good work
I appreciate these, without your engine swap video I would have been lost. Hopefully I wont need this one haha
Great video. Hopefully we see the video going back together. Plenty have done the tear down video but not many has follow threw with an assembly vid. Great content 👌
Arran 😅 my man bro I haven't been watching videos man almost done at uti so I just seen your video looks dope on what your doing man I see you're doing good man keep it up
Thank you brother 💪🏼❤️ appreciate you
Man great video!!! Keep documenting all these builds , and what ever little or large tasks it takes that go into your builds , you are making great content , my my my !!! Can’t wait for more content from your channel, thx 🙏 for sharing 👍👍👍👍👍👍
Good vid. About to do a head gasket on 2015 pathfinder.
Good information🧠 good vibes can’t wait to see what’s next always showing my support on this side😎to my favorite white boy on UA-cam✌🏼🎥🏁🔥
Love what you do bro!
Enjoyed this video. I'm kinda weird, I like watching motor tear downs.
Small note there are two positions of TDS
to be correct look at valves
very good bro was realy helpfull good job again keep going thanks alot
Yoo dope I found your page. Subbed !
Nice im getting my heads clean/resurfaced but unfortunately my valves are slightly leaking so I'm taking them out prior. Sucks because I just put new Viton valve seals smh.
My motor is 30 degrees off if I use the mark on the timing cover. And I verified by shoving an extension in the plug hole during the compression stroke
Would i be able to do head gaskets on a HR/VHR using the same steps in this video?
I have a 05 maxima and I have been having issue with it running close to hot but it never pegs the red. I go up a hill and gauge drops back to normal. Temp sensor replaced twice,thermostat replaced twice, water pump replaced, radiator replaced, fans replaced with runs wide open when it reaches 226 degrees and never cuts off until I turn car off. It runs great no misfires. Never had issue with running hot until I changed thermostat due to no heat idling in the winter. Now I have heat but runs hot idk. Any suggestions???
Does the engine have to be out to do this currently doing a timing job on a new g35 i bought and noticed the headgaskets were blown when i drained the oil to get the front timing cover off
No, you can do this in the car, but I don’t know if it’s just easier to pull the engine so you’re not bent over taking everything off
I need to do this on a 2001 Pathfinder 4WD - is it possible to to it without engine removal? I have done it on my 4Runner but this thing is a bit more of a puzzle LOL - from what I understand the coolant crossover pipe can't come out with the engine in , or is there a way to do it?
How much is this work? I need this done on my FX35 2010 with an VQ35HR engine.
Is it best to remove the engine before doing the heads on this motor since there really is no working room when it comes to the timing chain?
I'm just curious I just bought a 2005 G35 and I went to replace the fluids and the radiator was filled with water didn't smoke or anything but when I refilled it with antifreeze and drove down just down the block it ended up shooting a lot of white smoke out the exhaust so I'm wondering would that be a bad head gasket
Hey brother thanks for the video. Do you recommend oem or after market head gaskit the Tomei 0.7 is thicker will that effect anything or just go with eBay all gaskit and bolt kit
16:52 Yo Myke forgot his cup in your car again? 🙂
Aye he left a green tea in my Garage and then he left a coffee in my truck lol it’s war going on over here…
@@Its_Mike_Myke I was just asking I didnt want the pre workout to go bad! Aaron = Exposed! He cant be leaving stuff all around like that.. I knew there was something about that ninja! 🤣
🤨🤨🤨 wasn’t on purpose. I’m about to be bringing all kinds of shit to hide in your cars🤣😂🤣😂🤣😘 lol nah I couldn’t do that to you
Hey question what other gaskets will be needed to replace when replacing head gasket??
im assuming the engine needs to be pulled...my daughters g37 just popped head gasket...great...
any tricks to loosening up that crank pully bolt?
how to differentiate VQ35DE exhaust valve lifters from intake valve lifters
Hey Aaron I’ve been watching you for a good time now and wanted to ask cause I also have a 350z mine is 2005 and has a blown head gasket could that been a reason why my car won’t start
How did you remove the crank pulley bolt?
Hi quick question how much do you charge to rebuild a Vq35de motor??
Dm me on Instagram and we can talk about it🙏🏼❤️
Amazing content my guy. Im new to this but I was told that you need a special tool to do the timing for the VQ, is that true? I didn’t see you using a tool.
Great video
I need my head gasket changed how much would this cost me if I take it to a shop
So helpful 👏🏽
Is there a part 2
You made my engine swap possible, im sure youll make this possible for me
I’m just curious. Why did you choose to stick with the vq35de? I personally have one but myke myke has had bad experiences with them.
Hey what oil pick up tube is that? Aftermarket and better?
Tbh Id have to go back and check, I dont think it was replaced as far as I know!!
Is this the same motor as in a nissan maxima 3.5 v6....??
Yessir. A little different accessories since in the maxima it fwd transversely mounted but it’s still the vq35 yes
I did one but the engine is not starting only shooting
Hey I’ve got a question, I’ve got a M35 and I had just got it tuned and there was an immense amount of oil leaking onto the AC compressor but it’s not the valve covers what do you think it could be?
If you’ve gotta Instagram that I could text you on so you could help me figure this out ?
I’d love to help you. Yea hit me on my IG @the_crooked_king
You do suspension work?
Can be on the car?
I don't know if u can help me i have an 03 and I just put an engine with 50k miles and i was trying to burp the coolant and after a while the bubbles got violent splashing out of the plastic thing used to burp it so checked compression only cylinder one was the lowest 158 the others are 185 or so do u think it is that head
Hey brotha. You shouldn’t have anymore than a 10 psi variance between cylinders. Sounds like the head gasket is blown unfortunately
Thank you I will get the gasket changed and the heads check how did you hold the crank to get the crank pulley off
What's good my guy?
What weighted stand do you use?
Just a half ton. Nothing special
@Crooked Crown Motorsports Thanks man 👊
4:12pm friday November 29th tacoma wa I'm doin the exact motor but when putting in TDC the screwdriver trick piston is up but the marks on crank where the marks are is on the opposite side there pointing bank one the passenger side when standing in front of truck is it possible that someone has had the crank pully off and put it on wrong is that possible i just dont understand why yours on on the side pointing at the plastic cover on water pump mine on opposite side but pizton is up on cylinder one cylinder one bein left side from front of truck anything ypu could tell me id appreciate it.
Hey, what’s up man? Not to insult your intelligence, but are you sure you’re on cylinder number one a lot of people get the side mixed up on which one is cylinder number one. Is it on the correct stroke?
@Thecrookedking15 yea from front of truck would be passenger side?
I tried rotating again to see if on right strike still doesn't line up
Stroke ***
@Thecrookedking15 if you could help me out with this I'd really appreciate it anything you could help me get this thing running again
White Arron how can I swapp the vq in a spec v Sentra?
Hmmmmmm I’d have to look at that. They are transverse mounted tho because they are front wheel drive tho no?
Yes sir fwd
how much torque for head bolt?
How can I get quotes so you can work on my car brotha Aaron
Only if you was close by would’ve had you
Build my motor
Please
Why head gasket bad ,what is the reason
Overheated the engine. Lost coolant
@@Thecrookedking15
Thank you very much 🌹
👍👍👍
❤️❤️🙏🏼
🔥🔥🔥🔥🔥
💯🔥
❤️❤️👊🏼
❤❤❤❤❤
🙏🏼🙏🏼❤️❤️❤️🤙🏼
I enjoy your videos. But damn I hate when you stop the camera to remove certain things and bring it back after everything is taken off. Get a tripod so you can record everything.
👍🏻
💪👍💯
Engine Nissan Xterra VQ40 DE !
Not a bad way to spend 7500 on a vortex supercharger lol
Vortech has A LOT of different trims, kits and accessories ranging in all levels of price. I am however VERY fortunately sponsored by that amazing company. And no matter what you spend with them. WORTH. EVERY. PENNY. I promise 😈 #poweredbyvortech
Clark David Young William Moore Scott
DEEP EAST OAKLAND
💯💪🏼❤️
Step 1 LS swap
5.0 swap the z lol
Lol hmm 🤔 that would be interesting
@@Thecrookedking15 you with the 5.0 swapped 350z parked next to mike with the ls two of the craziest zs 💪🏼
Come white Arron. Can't show us a how to with out showing us the how to. Please get a tripod and show us the the full process
how in the fuck do i do this shit bro😭
Bunk
?
@@Thecrookedking15 I hate vq's dumbest motor ever made
@@Thecrookedking15 wen it blows up go LS3
Nah I already have an ls3 Z
@@jamesray9186 dumbest motor ever made? The vq35 is and was one of the most reliable v6s made. With regular maintenance they are known to go past 200,000 miles. You’re talking out of your ass.
Lol , umm you’re kinda acting like the engine being in or out of the vehicle is similar!? Lol the engine being out of the vehicle is a BILLION times easier then what someone would encounter with the engine still in the vehicle. There’s tons of things that have to be moved or removed just to get to the point you’re starting at . Anyway , great video
Wait wdym put the pin in the chain tensioner?? What the hell is going on in that area? I dont get that part, can u further explain that part to me
Vq 35 power 💪
❤️💯💪🏼
What bolts you use to mount the engine to the stand?
The transmission bolts
🔥🔥
🔥🔥🔥
❤️❤️🤙🏼🙏🏼🙏🏼🙏🏼