Kia Soul Head Removal Part 3

Поділитися
Вставка
  • Опубліковано 26 гру 2022
  • This is the final part of the head removal but this is the installation of the head. This is on a 2011 Kia Soul with a 2.0 liter engine. I show the final parts that need to be removed and then install the head with all of the torque specs. I will also include all the torque specs here as well as the parts below.
    Torque Specs:
    Intake Manifold: 11-16 lb ft
    Exhaust manifold: 31-40 lb ft
    M10 Cylinder Head bolts: 16 lb ft, 20 lb lft + 65 degrees, 65 degrees
    M12 Cylinder head bolts: 20 lb ft, 33 lb ft + 65 degress, 65 degrees
    Camshaft bearing caps: 11 lb ft
    Timing Chain tensioner: 20 lb ft
    Cam sprocket: 75 lb ft
    Timing belt Idler: 32-40 lb ft
    Harmonic balancer bolt: 123 lb
    Parts:
    Head gasket kit with head bolts: amzn.to/3WCsQHi
    Timing belt kit with water pump: amzn.to/3Vka5aF
    thermostat: amzn.to/3jvcS3u
    thermostat housing: amzn.to/3YOOie3
    Spark Plugs: amzn.to/3vc8Lw5
    Spark Plug Wires: amzn.to/3vgHicp
    Coolant: amzn.to/3jtH5Ab
    Oil Filter: amzn.to/3HXSKRN
    Oil: amzn.to/3BZCLiz
    Honing stone: amzn.to/3YOZtDS
    Filming Gear:
    Go Pro Hero 10 Kit: amzn.to/3S9kd55
    Go Pro Endurance Battery: amzn.to/3S1KXUS
    Manfrotto Camera Tripod: amzn.to/3BnmYch
    Instagram: / 0p_0verhaul
    TubeBuddy Link: www.tubebuddy.com/operationov...
    Patreon: / operationoverhaul
  • Авто та транспорт

КОМЕНТАРІ • 14

  • @kkkx6532
    @kkkx6532 Рік тому +1

    Thank You very much! Have a good day!😀

  • @codywalls5765
    @codywalls5765 6 місяців тому +1

    This is great man thanks for sharing this knowledge

    • @operationoverhaul
      @operationoverhaul  6 місяців тому

      You are very welcome. If you need anything else feel free to contact me.

  • @edgartorres4482
    @edgartorres4482 9 місяців тому +1

    Great video 👍🏼

    • @operationoverhaul
      @operationoverhaul  9 місяців тому

      Thank you, I appreciate the comment and the view.

  • @lifeonmars11
    @lifeonmars11 7 місяців тому +1

    Thanks!

    • @operationoverhaul
      @operationoverhaul  7 місяців тому

      Thank you. I really appreciate the super thanks and you are welcome. If there are any specs or anything that you need feel free to contact me and I can you out any way I can

  • @TheMrJonmoore
    @TheMrJonmoore Рік тому +1

    Thank You!

  • @diyray352
    @diyray352 3 місяці тому +1

    What is a normal cost for the machineshop to do what you had done

    • @operationoverhaul
      @operationoverhaul  3 місяці тому

      I would say somewhere between 500 and 700 roughly but that could differ based on locality and shop rates.

  • @gregferguson2398
    @gregferguson2398 8 місяців тому +1

    Did you put new oil filter in it

    • @operationoverhaul
      @operationoverhaul  8 місяців тому

      Yes, I put a new one on and some of these kias like to use a factory brand filter only. They will throw a vvt code sometimes if a kia/hyundai brand filter is not used.