How to Replace Front Driver Side Axle 2006-10 Dodge RAM

Поділитися
Вставка
  • Опубліковано 12 жов 2020
  • Buy Now!
    New CV Axle Shaft from 1AAuto.com 1aau.to/ia/1AACS00326
    A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install one in your 2002-2009 Dodge Ram 1500.
    • Check here for more videos on the 2002-09 Dodge Ram 1500: • Dodge Ram 1500 3rd Gen...
    This process should be similar on the following vehicles:
    2002 Dodge Ram 1500 Truck
    2003 Dodge Ram 1500 Truck
    2004 Dodge Ram 1500 Truck
    2005 Dodge Ram 1500 Truck
    2006 Dodge Ram 1500 Truck
    2007 Dodge Ram 1500 Truck
    2008 Dodge Ram 1500 Truck
    Tools you will need:
    • Pocket Screwdriver
    • 21mm Socket 1aau.to/oa/1AXAA00043
    • Straight Cutters
    • 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
    • Ratchet 1aau.to/oa/1AXAA00016
    • Socket Driver
    • Socket Extensions 1aau.to/oa/1AXAA00015
    • Swivel
    • Torque Wrench 1aau.to/oa/1AXAA00044
    • Bearing Grease
    • Bungee Cord
    • Copper Anti-Seize
    • Rust Penetrant
    • Center Punch 1aau.to/oa/1AXAA00055
    • Floor Jack 1aau.to/oa/1AXAA00068
    • Hammer 1aau.to/oa/1AXAA00091
    • Jack Stands 1aau.to/oa/1AXAA00065
    • Rubber Mallet 1aau.to/oa/1AXAA00413
    • Wheel Chocks
    Subscribe: / @trq
    Check out our playlist:
    Dodge Ram 1500 3rd Generation 2002-09: • Dodge Ram 1500 3rd Gen...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто та транспорт

КОМЕНТАРІ • 70

  • @TRQ
    @TRQ  3 роки тому +2

    √ *Watch the Video*
    √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
    √ *Do it Yourself*
    √ *Save Money*

    • @PapodeArmas
      @PapodeArmas 2 роки тому

      been doing that for a long time now! thank you A1, the videos are my favorite part, SUPER helpful.

  • @Emmitt321
    @Emmitt321 2 роки тому +17

    Not a single part of this job took a couple loving bonks on my truck. It required big torches and lots of frustration

    • @drewerotic
      @drewerotic Рік тому +3

      I hope mine takes a couple loving bonks and not torch the entire truck. We will see🤞

  • @izzightShrooms
    @izzightShrooms 3 місяці тому +2

    I tackled this on my 09 ram this weekend and the toughest part getting the lower ball joint to disengage. Finally got it though! Thanks for the video!

  • @SouthBendPhotographer
    @SouthBendPhotographer 5 місяців тому +2

    I'm glad this only took 8 mins, I thought it would be a couple of hours..
    Lol, kidding, great video!

  • @JacksonGuitarsPlayer03
    @JacksonGuitarsPlayer03 Рік тому +1

    Since this side is “longer” because when you pull the CV axle out, it still has the intermediate shaft connected you therefore need a lot more clearance to get this one out than your passenger side which is far more simpler. So yeah, take the WHOLE damn thing apart and pull it straight out. Take intermediate shaft out install on new axle, slide new in and re assemble everything.
    This video is it 👍🏼👍🏼👍🏼👍🏼👍🏼

  • @tinahurley4541
    @tinahurley4541 2 роки тому +4

    Love you video's as a single woman working on my own vehicle you have saved me, I have purchased parts more for my BMW than Dodge saved money big time. But I want to know what relationship you have with that Dodge that it gets Love taps. No love taps on mine more hate S&M type beating nothing came apart that easy

  • @jez032163
    @jez032163 2 роки тому +2

    Excellent! I'm glad I found this video first no need to look at another video.

  • @gvjester
    @gvjester 3 роки тому +8

    Great video!! You make it look SOOO easy, I know mine won't go nearly as smoothly but..... Excellent video! Thank You!

    • @TRQ
      @TRQ  3 роки тому +1

      +gvjester Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ

    • @blades.
      @blades. Рік тому +1

      Well of course it was easy. All the parts were new and shiny. Nothing was frozen together with rust and whatnot

  • @firearmsfreedomcanada7169
    @firearmsfreedomcanada7169 2 роки тому

    Thanks for the video. This was very helpful as I have to do all my tie rod ends, inner and outer on both sides and both CV Axles on my 2010 Ram.

  • @unixdoes
    @unixdoes Рік тому +1

    "loving bonks" is a new band name

  • @ShreddinSleds
    @ShreddinSleds 3 роки тому +1

    This helped me help a friend over the phone replace his CV axle haha

  • @davidperry9968
    @davidperry9968 2 роки тому

    Excellent video and explanation along the way.

  • @jadestarr7153
    @jadestarr7153 2 роки тому

    Solid AF . Nicely done

  • @alexcruz2631
    @alexcruz2631 Рік тому

    Excellent! Thank you! I'm gonna do my ram today

  • @stephenkasanovich6656
    @stephenkasanovich6656 2 роки тому +2

    except ball joints don't pop out with a bonk. I've had to hammer on them for hours or even cut them out. Other thanthat very good video. A "when ball joints won't release" segment would have made it more real world though.

  • @doofi86
    @doofi86 Рік тому +1

    Excellent video, easy to understand 👍 helped me greatly. Too much love bonkin though to me at least 😂. Maybe mix it up with a little taparoo here , a smack here, hiiyaah

    • @TRQ
      @TRQ  Рік тому +1

      +Doofi86 Thanks for watching. Buy the part in this video on 1AAuto.com: 1aau.to/m/Shop-TRQ

  • @slacinace
    @slacinace 2 роки тому +3

    please make a video replacing the stub shaft... they only come off with the cv 1/2 of the time lol

  • @charlesellis4470
    @charlesellis4470 2 роки тому +4

    According to the manual, the lower ball joint is first torqued at 35 foot pounds, then 140 to 160 foot pounds

  • @lonelybikr
    @lonelybikr 3 роки тому +6

    Thanks guys. My auto parts dealer "forgot" to mention the inner spline and it welded itself to the CV shaft.

    • @TRQ
      @TRQ  3 роки тому

      +Jeff B Thanks for watching our video! 1aau.to/m/Shop-TRQ

    • @davereeves1967
      @davereeves1967 3 роки тому

      I took a torch to the old CV axle last weekend, held the inner shaft with a welding glove and gave the CV axle some "bonks" with a hand sledge, it broke free after the 4th or 5th whack.

  • @sorehair7075
    @sorehair7075 2 роки тому +6

    what about if the lock ring inside the axle breaks first? The stub remains in the diff. How do you remove the stub from the diff housing?

  • @teppiccarrot
    @teppiccarrot 3 роки тому

    Love the bonks👍

  • @zacsav4ge100
    @zacsav4ge100 2 роки тому

    What is the bearing inside that should be replaced? Having trouble finding the part. Or would you suggest replacing?

  • @lachy5146
    @lachy5146 3 роки тому +5

    U should include the sizes and tools needed in the comments

    • @TRQ
      @TRQ  3 роки тому

      +Jonathan Ibanez Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ

  • @thedripdrop9826
    @thedripdrop9826 Рік тому +2

    what size is the axle nut? i cant seem to find a straight answer

  • @terrycarter1061
    @terrycarter1061 6 місяців тому

    Great video. Thanks

  • @georgesduplessis1556
    @georgesduplessis1556 Рік тому

    Great video...Just wondering how many attempts it took to slide in the two holes.

  • @leeh.8629
    @leeh.8629 2 роки тому

    Put the intermediate shaft in first. I tried to put the axel and intermediate in all at once and destroyed the seal. Thanks for the help

  • @Easyrider4732
    @Easyrider4732 5 місяців тому

    He made that look easy I wouldn't have that type of luck.

  • @wrench9111
    @wrench9111 2 роки тому

    Mine went exactly as in the video .. Great video .. Bonk On

    • @TRQ
      @TRQ  2 роки тому

      +paul aaronson Thanks for watching our video! 1aau.to/m/Shop-TRQ

  • @WS1_AUTOS_N_STUFF
    @WS1_AUTOS_N_STUFF 2 місяці тому

    I found the upper ball joint didn’t torque properly until I had proper weight since it was only around 40lbs 👍
    Also I have a very very regretful 2” puck lift and had to use a jack and ratchet strap to get upper ball joint in 🤦🏽 I didn’t change cv yet because it’s on the opposite side, just change the upper ball joint

  • @angelwarrior2495
    @angelwarrior2495 Рік тому +1

    what type of lubricant did you use?

  • @scottpolenske9224
    @scottpolenske9224 2 роки тому

    Do you guys offer a cv shaft for the slightly steeper angle from a 2" leveling block/kit?

  • @ijw7801
    @ijw7801 2 роки тому

    I wanted to see that seal get changed. Is it same as rear axle seal, where u can just remove old one and put in new, or is there more to it for the front??

    • @allthestuff1
      @allthestuff1 Рік тому

      Badically yes theres nothing else you gotta do for that seal

  • @BBDos
    @BBDos Рік тому

    Does the front diff need to be drained beforehand?

  • @yangtaolai129
    @yangtaolai129 2 роки тому

    Good video. I have cv axle for for Dodge Ram

    • @TRQ
      @TRQ  2 роки тому

      +Yangtao Lai Thanks for watching our video! 1aau.to/m/Shop-TRQ

  • @dioncrookedneck4125
    @dioncrookedneck4125 Рік тому +1

    What size socket is the CV axle nut?

  • @user-jr9ef7wj7s
    @user-jr9ef7wj7s Рік тому

    My 2015 ram has broken 4 cv axles in the last month. Does anyone have an idea of what might cause this?

  • @shaynekirby9117
    @shaynekirby9117 3 роки тому +1

    "Loving bumps" 😆😅🤣

  • @grizzlyexplorer7700
    @grizzlyexplorer7700 2 роки тому

    Can you change the intermediate shaft on 2015 ram 1500, drivers side ?

    • @TRQ
      @TRQ  2 роки тому

      +grizzlyexplorer We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ

  • @ipd793slo
    @ipd793slo 3 роки тому +1

    How do you remove the stub shaft if it didn’t come out with the axle? Mine needs replaced and having trouble getting it removed.

  • @xxbioklismxx1850
    @xxbioklismxx1850 4 місяці тому

    A mechanic told me some of these are weird and requires an update to the differential. Is that true? I'm really sick of being jerked around and robbed. He seems good but I wanted to ask the Internet at large. Any help is very very appreciated.

  • @gimlidragwayfan
    @gimlidragwayfan 3 роки тому +2

    No need bottom ball joint

  • @ijw7801
    @ijw7801 2 роки тому

    Did 1A auto change name?

  • @harryodum5598
    @harryodum5598 2 роки тому

    I wish you would have changed the seal that's what I kinda wanted to see also.But good video

  • @salvadorsepulveda6415
    @salvadorsepulveda6415 3 роки тому +2

    The Seal !!!!!

  • @RetroRod-im6tl
    @RetroRod-im6tl 10 місяців тому

    Where was the locking clip?

  • @dustingiberson5749
    @dustingiberson5749 Рік тому

    Please give my head a few loving bonks I can't do this

  • @raynoy3174
    @raynoy3174 9 місяців тому

    How can u tell u need to replace

    • @TRQ
      @TRQ  9 місяців тому

      +ray noy We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

  • @saskmuddinatv
    @saskmuddinatv Рік тому

    Bonks

  • @stihlhead3338
    @stihlhead3338 3 роки тому +1

    Your loving bonks was a bit annoying!

  • @luvsracin87
    @luvsracin87 3 роки тому

    Could we see the passenger side for a 2014 ram?😅😅 Mine doesn't have the bolted seal.....and I can't find anything on it

  • @user-fs3nk5bo5t
    @user-fs3nk5bo5t 6 місяців тому

    Looks about as rusted out as my truck. lol