Wearing your helmet as much as possible is very true. Not only will the enemy be able to throw artillery, rockets, drones etc at you pretty much anywhere you are, there are also non combat related injuries. One of our guys was securing a hatch on a truck when the truck lurched forward and the hatch slammed on his head. He got injured pretty bad but the doctors told him had he not worn a helmet it would have probably been fatal. Another example was a guy leaning against a tree and the tree fell over hitting another guy on the head with a large branch. I myself once slipped and fell while walking in a burnt out building and hit the back of my head on concrete. Falls happen very easily when wearing full kit. Also agreed on the issued helmet pads. They all suck. Aftermarket pads are well worth the money. I once had traction alopecia on the side of my head from a pressure point. Not fun.
Had a guy who had a similar situation. He had propped open a Humvee door with a rock, he went in the truck to get some more 50 Cal and the rock broke. The whole up armored door came down on his head with his helmet. Had he not been wearing it he would’ve died almost certainly.
The MC used ECH's, Gentex makes both the ECH and the high-cut (I also believe that they just sent in the ECH's to get cut, because they also use the same rails that recon had been using on old ECH's and MICHs from ops-core). Gentex is the parent company of ops-core and they use older materials, while ops-core uses the good stuff. Also I haven't used an issued helmet in years, if you're a careerist then invest in your job and gear, spend some extra bones to get an SF from ops-core. And no one can argue because it's a ballistic helmet issued to MARSOC and other special operations.
@@TheGruntPerspective I never had any problems, someone else's command may be weird as per usual. Last two commands haven't said anything. Worn my own stuff that's multicam and no arguments as long as the front and back plate bags are CB. Wanted to add a few more things as I watched your video, I used JB weld for my base plate, the last time I had an ECH and it never moved. Plus you help a boy who gets your helmet next. And the 31d's that we get have a proprietary battery so that's why it's weird, compared to the 31a battery pack, I think they are the same height (don't quote me though) I'll have to look at mine and compare. When I used Peltors, I would tuck my cord under the helmet pads on the inside to avoid snags, especially in the J haha. I've harped that a lot with guys. It's why I see a lot of guys using covers so they can tuck wires underneath, helps with nod wires, and useful for using scrim. I'd love to bounce some stuff off you and back and forth. Love sharing stuff that worked for me and if it helps dudes then I'm happy.
Thank you man! Was just watching your other helmet video this morning and boom you made a new one - really appreciate you sharing this solid info here. Your channel has been invaluable.
For me personally, the team wendy helmet liners put a crazy amount of pressure on the top of my nugget. The helmet itself fits me great. I put 4D tactical Hive deluxe pad set in my Exfil helmet and it wears like a dream now. Theyre going into my other ballistic and bump lid soon.
@TheGruntPerspective everyone's heads are shaped different. What's comfortable to me may work terrible for others. I love the TW helmets but the pad set in the Exfil specifically were a no go for me. 5 mins of wear and I'd have a headache starting. I have a different TW pad set in an Avon helmet that fits great 🤷♂️
I use an AKA2 as well, excellent mount, I find that with no counterweight pouch I can punch the PVS14 out in the middle position in front of me and it somehow balances nicely with an ACH. Can't explain it. When I was in I had my own personal J arm. I plastic cemented the main joint together (over my left eye) and I would keep the issued one in my rucksack in case I needed to shoot passive through the RCO (never happened). I miss those titanium silver rhino mounts and the plates for the LWH, that was a pretty slick setup for like a few years 2014-2016 or so
With the j-arm a less destructive way is to wrap it in electric tape and force the screw past it heat shrink works as well as you fully cover the contacts
The Corps has come a long way on gear! Balance is the key to comfort! Nothing like the old leather helmet strap! On the mount, use the longer screw with a washer, and some heavy duty double sided tape between.
Great video. My set up is very similar. Not sure how you dummy cord your NVG's but I would check out the NOD Lock from parashootergear I think you would like it as a possible option to dummy cord your NVG's.
With my J arm i ended up just putting a strip of electrical tape over my pvs14s contacts. It solved the turning off issue I had. For all the blokes that don't want to ruin the j arm tabs.
Great video man! I’m honestly torn rn. Sold my team Wendy bump for a pgd arch ballistic helmet and kinda regretting it. Don’t know if it’s because I’m in between sizes or the standard pads suck cuz the hat always feels unstable and jostles around even when I crank the boa. Have a couple of other thoughts but it’s a longer convo
The boot blouse was a nice touch, does it get in the way of opening the pouch? Granted you are very rarely going to get into it anyway but just out of curiosity
Have you considered trying to get a the Microlattice pads from hard head veterans? I imagine those are perfect for the marine corps especially when staying cool and cleaning is concerned
I kinda do in the plate carrier video. It’s nothing crazy and I haven’t make a video with it because I can’t just take one of those radios home with me
Nice to see the Marines get gear that works. Waiting for the Army to figure that concept out too.
I’m sorry brother
Glad to see you have a seat now and are more relaxed. Wish you could put links into the description. Another excellent video. Keep up the good work.
Thanks for watching!
Wearing your helmet as much as possible is very true. Not only will the enemy be able to throw artillery, rockets, drones etc at you pretty much anywhere you are, there are also non combat related injuries. One of our guys was securing a hatch on a truck when the truck lurched forward and the hatch slammed on his head. He got injured pretty bad but the doctors told him had he not worn a helmet it would have probably been fatal. Another example was a guy leaning against a tree and the tree fell over hitting another guy on the head with a large branch. I myself once slipped and fell while walking in a burnt out building and hit the back of my head on concrete. Falls happen very easily when wearing full kit.
Also agreed on the issued helmet pads. They all suck. Aftermarket pads are well worth the money. I once had traction alopecia on the side of my head from a pressure point. Not fun.
Had a guy who had a similar situation. He had propped open a Humvee door with a rock, he went in the truck to get some more 50 Cal and the rock broke. The whole up armored door came down on his head with his helmet. Had he not been wearing it he would’ve died almost certainly.
I like that netting you used with the mesh underneath. Thanks for the content, this was good stuff.
@@Masta_E thanks for watching!
The MC used ECH's, Gentex makes both the ECH and the high-cut (I also believe that they just sent in the ECH's to get cut, because they also use the same rails that recon had been using on old ECH's and MICHs from ops-core). Gentex is the parent company of ops-core and they use older materials, while ops-core uses the good stuff. Also I haven't used an issued helmet in years, if you're a careerist then invest in your job and gear, spend some extra bones to get an SF from ops-core. And no one can argue because it's a ballistic helmet issued to MARSOC and other special operations.
Oh but they will argue, they will. And you will lose every time
@@TheGruntPerspective I never had any problems, someone else's command may be weird as per usual. Last two commands haven't said anything. Worn my own stuff that's multicam and no arguments as long as the front and back plate bags are CB. Wanted to add a few more things as I watched your video, I used JB weld for my base plate, the last time I had an ECH and it never moved. Plus you help a boy who gets your helmet next. And the 31d's that we get have a proprietary battery so that's why it's weird, compared to the 31a battery pack, I think they are the same height (don't quote me though) I'll have to look at mine and compare. When I used Peltors, I would tuck my cord under the helmet pads on the inside to avoid snags, especially in the J haha. I've harped that a lot with guys. It's why I see a lot of guys using covers so they can tuck wires underneath, helps with nod wires, and useful for using scrim. I'd love to bounce some stuff off you and back and forth. Love sharing stuff that worked for me and if it helps dudes then I'm happy.
Thank you man! Was just watching your other helmet video this morning and boom you made a new one - really appreciate you sharing this solid info here. Your channel has been invaluable.
Thanks for the support!
Sponsored by Monster 😎. God speed killer. Great content
Lol maybe one day
For me personally, the team wendy helmet liners put a crazy amount of pressure on the top of my nugget. The helmet itself fits me great. I put 4D tactical Hive deluxe pad set in my Exfil helmet and it wears like a dream now. Theyre going into my other ballistic and bump lid soon.
Hmm, I’ve never felt that with these
@@TheGruntPerspectivei've heard really good things about the 4D tactical Hive deluxe pads. have been thinking about buying them for my helmet.
@TheGruntPerspective everyone's heads are shaped different. What's comfortable to me may work terrible for others. I love the TW helmets but the pad set in the Exfil specifically were a no go for me. 5 mins of wear and I'd have a headache starting. I have a different TW pad set in an Avon helmet that fits great 🤷♂️
Lets go!! Been waiting for this since I saw your stories on IG. Great work man.
Thanks for watching!
I’ve been excited for a new video👍👍
I apologize for the long gaps. Working has been gnarly
I use an AKA2 as well, excellent mount, I find that with no counterweight pouch I can punch the PVS14 out in the middle position in front of me and it somehow balances nicely with an ACH. Can't explain it. When I was in I had my own personal J arm. I plastic cemented the main joint together (over my left eye) and I would keep the issued one in my rucksack in case I needed to shoot passive through the RCO (never happened). I miss those titanium silver rhino mounts and the plates for the LWH, that was a pretty slick setup for like a few years 2014-2016 or so
Those titanium mounts were the shit
With the j-arm a less destructive way is to wrap it in electric tape and force the screw past it heat shrink works as well as you fully cover the contacts
I am a cave man
Those helmets are 100% ops core. On the inside you will read where it says “gentex” which is the company that owns ops core
Yeah they are, thanks for watching!
One tip for the J Arm. I just put electrical tape on the metal tab and it makes your problem go away.
Yeah that works too
The Corps has come a long way on gear! Balance is the key to comfort! Nothing like the old leather helmet strap! On the mount, use the longer screw with a washer, and some heavy duty double sided tape between.
That’s a good idea, I might try that out
Great video. My set up is very similar. Not sure how you dummy cord your NVG's but I would check out the NOD Lock from parashootergear I think you would like it as a possible option to dummy cord your NVG's.
Yeah I’ve seen those before, they seem very nice
With my J arm i ended up just putting a strip of electrical tape over my pvs14s contacts. It solved the turning off issue I had.
For all the blokes that don't want to ruin the j arm tabs.
That would work as well
That old cami net is gonna reflect IR if you live in a wooded environment. Recommend painting/restaining.
It is painted. And I will tell you from experience it’s REALLY easy to miss cammie net at night. It actually works really well
Hey there love the content, just wondering what youve used as the base layer/ helmet cober for your scrim, looks awesome 🤙🤙
There’s no cover on there, it’s just the netting stretched over the helmet under the rails
Thanks for watching!
the ECH should be produced by gentex, the parent company of opscore. very nice helmets
Yeah I believe that’s correct too
Great video man! I’m honestly torn rn. Sold my team Wendy bump for a pgd arch ballistic helmet and kinda regretting it. Don’t know if it’s because I’m in between sizes or the standard pads suck cuz the hat always feels unstable and jostles around even when I crank the boa. Have a couple of other thoughts but it’s a longer convo
Hit me up on instagram?
The boot blouse was a nice touch, does it get in the way of opening the pouch? Granted you are very rarely going to get into it anyway but just out of curiosity
No not at all actually
What type of Peltors are these that they issue you? The Comtac III, IV, V?
These ones are V’s
26:20 made me audibly laugh lol
The squeaking is horrendous
Anti Gravity Pads from TNVC and Team Wendy Boa. you're welcome...
I’ll check it out, I’ve used a boa before on my ACH, definitely loved it
@@TheGruntPerspective Zero Gravity Pads are primo, mold to your head and absorb sweat
Have you considered trying to get a the Microlattice pads from hard head veterans? I imagine those are perfect for the marine corps especially when staying cool and cleaning is concerned
I have not. I know nothing about them though
Chinesium
@@tylergarrett4498 yeah that’s kinda what I was talking about when I said quality
Wow 😳
Thanks for watching!
Do you go over your comms setup in any of your videos?
I kinda do in the plate carrier video. It’s nothing crazy and I haven’t make a video with it because I can’t just take one of those radios home with me
Did you make the helmet cover under the cammy netting?
There’s nothing under the cammie net. That mesh stuff is part of it
Are you GruntComm from GLids videos? Great videos btw!
I am not, and thank you for watching!
@@TheGruntPerspective all good!
brother has had one too many TBIs
if the Corps want you to have....
oregon aero
I’ve heard a lot of people suggest these
Hello fellow grunt. I prefer the low cut helmet too, although I hate all helmets in general. Good video man.
Follow me!
Thanks for watching!