I got the RokForm, and I couldn't be more satisfied. Great case, great accessories (including a finger ring/stand that clicks into the locking grooves on the back of the case, and a vibration damper for the handlebar mount).
The same complaint is reported by some Quadlock users. As one person pointed out, the problem is not the mount, the problem is vibration generated by the bike together with inability of newer phones' stability control to tolerate. So some bikes will be more prone than others. If a mount has an arm incorporated this may magnify amplitude of vibration. Playing with position of the mount and angle of the arm might help. It might also be helpful to add a rubber or nylon washer at the base of the arm, if possible, to act as a shock absorber and remove some of the rigidity within the system. A potentially expensive experiment though.
With the rokform you can purchase the case and mount separate and purchase a Ram ball mount , which has the same easy release lever as the quad lock. Also uses a RAM mount system so you can REALLY control the phones position better than either mounts stock options.
I had been using the ROKFORM for the last couple of years and it has been a great product. Recently however I have switched to the QuadLock. My main reason was the case. The ROKFORM case was huge and in order to use wireless charging you had to cut the magnet out of the phone. I suppose the magnet does come in handy in certain situations but I found that I never used it that way. The QuadLock case is much sleeker which is good for me as I put it in my pocket a lot when not on the bike. I also have zero problems with the buttons. I don’t use my phone on flat surfaces so the rocking doesn’t affect me. I typically hold my phone and have the phone ring installed to help stabilize it. I found the mounting system on the QuadLock much more versatile and easier to find that “sweet spot”. The ROKFORM mount is just ok (for me). I also use a wireless charging head mounted on the bike so I don’t have to keep plugging and unplugging the phone all the time. The QuadLocks head is very secure and is weatherproof. The ROKFORM’s head is not weatherproof and does not “click in” when mounting. The magnet also has to be removed from the case in order to charge wirelessly. They do make special cases for wireless charging but not for my iPhone 12pro Max. These are both great products and you can’t go wrong with either of them. Personally, I think the QuadLock is more versatile with more mounting and accessorizing options. Again, I have used both [recently} and these are just my opinions.
I like the quadlock for several reasons, listed below. The key reason is flexibility and customization. If you only want to spend 70 to get it going, cool. If you want to go all in, expect to spend 200$ and up. I went all in, sorta. ******************** First, this is my quadlock head setup, that I use for 3 locations. ******************** (A)Weatherproof wireless charging head. I ride in the rain, and I hate excess loose wires. (B)1" ball to standard quadlock head. I swapped the standard with wireless head. Then reused the standard head for my home Samsung DEX setup, where wireless charging isn't needed. it could Be though, if you used wireless dex with wireless charging. (C) 1" to 1" ball socket Ram Mount arm. Quadlock sells their own double ball joint arm, but it's a non standard size. If you went with quadlock, you have to stay in that ecosystem. They don't force you. I already had several 1" ball adapter stuff, for my truck driver GPS units. ********************** ********************** Second, this is my base setup for 5 different locations. ********************** (A) 2018 Volvo Semi truck. I have a 1" hand rail near the driver side air vents. I use a 1" bar clamp to 1" ball adapter. With a USB C cable neatly routed for power. (B) 05 Harley Dyna Superglide. I'm using some mid bend thrashin bars. I use the same style clamp, as in the truck except chrome. For power a battery tender to usbA, with a 6' usbA to usbC cable neatly routed. (C) 22 Kawasaki Ninja 650. I mount it to the stem. Unfortunately the quadlock stem only works with circular stem holes. Kawasaki uses a hexagonal stem hole. So, a hexagonal stem mount to 1" ball adapter. I also use this location to run my pcV, when I need to. For power, I'm using quadlocks battery to USB adapter and a 6' usbA to usbC cable, neatly routed. (D) Nexdock 360, for on the go Samsung Dex + Nintendo Switch. I use the key ring adapter, to prop my phone up in landscape. It's also useful for my small hands to keep ahold of my big ass phone. (E) Skull n Co Switch dock, also for samsung dex. A simple 2 hole flat base to 1" ball, screwed into my desk. With the wires for the SkullNCo jump gate routed cleanly. **************************** Okay, sorry for that long winded explanation. If you read it though, I truly use my phone everywhere, and try to maximize the usefulness of my NON ESSENTIAL purchases. Which is a luxury in and of it self. I'm a truck driver, who is always On the go. Ensuring my phone is protected and fully charged is mandatory. For my work, and off duty entertainment. For the intended purpose, motorcyclists phone mount, you can buy what is necessary. Then add more if that suits your lifestyle. Edit: Oh Yeah! I forgot! The main reason I went with quadlock is the stabilizing base adapter. I'm using an expensive ass phone, and I wanted to protect its camera modules. So really, the quadlock seems cheaper... but when you fully utilize it, it's easily twice as much as rokform.
Good review of both I have the quad lock I actually really like it, I feel like my $1K phone is secure after riding 1700 miles in a day my phone didn't move or make me feel like it was gonna fall off.
looking at the Rokform case, how does it work in lanscape after getting some bumps, because the mounting point is not at the center of the phone. at the price of a Rokform you get a Quadlock with a charger.......just saying. plus how does the compass work with a magnet on the case?
No wireless charging and it's no problem for you? :O Now wireless charging is the best feature in today's phones. Now how I can understand you chose everyday take off case than plug in cable? lol
My only complaint is that you easily break the black clip on the top when tightening the center screw. This fortunatly doesn't happen on the (expensive!) Wireless charging mount
My one big complaint is that the case is basically shit, its too smooth, there is no grip strips on the sides of the phone so that it doesnt slip out of your hand. Most of my cases have some sort of textured surface on the sides. This smooth feeling case doesnt really feel that good to be honest. I wish they would do something what dbrand does. Put tiny textured dots on both sides of the phone. Then it is an everyday case, right now I just use the case when I am riding which is not everyday
I've been running the Rokform on every phone for many years now. While off roading, commuting, or on the bike, this brand has never let me down. Also, the ability to mount your phone using the magnet while in the garage, or wherever, has been so useful over the years. Great comparison, Rokform has a customer for life here.
I've been using quadlock for about 7 years now and it's absolutely amazing! I use, car, motorbike and bike mounts and they've been spot on every single time! Doesn't feel cheap at all!
Thanks for the informative review. Initially, I was interested in the RockForm, but the cost of it led me to this video of my second choice. Really like the Rock Form the best, but since I mostly go on short day trips on a cruiser, I may settle for the Quad Lock. As a casual rider, it's hard to justify the price difference. Thanks again for a great video!
Agreed, but quad lock is a fail too depending on which phone you have. Both companies should be ashamed they’ve got $70 knickknacks they both have major flaws that are frankly unacceptable. Blows my mind that nobody has wipe them both out yet
As a former ram mount user , this video finalized my decision to go with the rokform. I could not be happier. Mine is on a 2017 street glide with paul yaffe 10 in monkey bars . Very high quality and holds phone very solid . A little learning curve to mount and unmount phone but I am used to it after 5 to 10 uses. Well worth the money. I love it
I used QuadLock for almost a year now and find myself looking for something else for one main reason: The composite locking face wears and allows lateral play over just a couple of months of constant use. Now, to their defense, QuadLock will send you a replacement because their customer service is great. However, its just too much of an inconvenience to have to email them....wait...swap it out...only to have to repeat the process a few months later. It would be awesome if they sold these parts on their site...but unfortunately they do not. Bummer. I may have to give Rockform a go just because of the all metal mounting surfaces. Great review and solid pro/con for both. Thanks!
Yeah this same thing has happened to me TWICE - now I know that the bigger and heavier the phone - the faster the lock face wears away with that white residue and your phone just gets less and less secure. Switching to RokForm is the plan soon - but I haven't seen anyone point out if the "lock face" on RokForm is aluminum or plastic...?
If you're curious how the quad lock holds up after 2 years of courier work and over 10.000 mounts and dismounts: ua-cam.com/video/--XfAO6FyP0/v-deo.html
What you should include in this is the fact that Rockform on a HD will ruin your camera. Especially with an iPhone pro. And that quad lock has a vibration dampener that prevents that
I'm using Quadlock and I must say I agree on the side buttons not being as responsive but I've gotten car, desk and bike mounts and I'm very very happy, I also got two wireless chargers and they work great, although Rokform's seems better in materials I'm sure I'd still keep this one, even for the same price. Thanks for all the work of putting together this review!
I use the quadlock and have it for just over a year. I like it pretty well. My biggest biff is trying to get it to click onto my belt clip. Getting it on the handlebar mount is simple. I've never had an issue with it so far. Great review by the way. 😎😎
I used to love RAM mounts but after a scare (I was lazy, no rubber bands on rough road) I started to look. I also needed to sort out a wireless charging solution. Different people use phones differently of course but (1) the buttons on the side? I almost never use them (2) bump/rocking on the desktop? Dunno, I use the phone in my hand or in a mount. But the thick case and no wireless charging on the Rokform - I could not live with that. Plus the ecosystem of Quad Lock is so large, there's a solution for almost every problem. Not quite RAM level but you can interface with RAM, so good to go
One thing I have noticed. Is that the Rokform is that the magnet interferes with the Note 9's stylus. It also seems to throw off the compass and rotation sensor. Sometimes locking my phone in landscape mode.
Had my Quadlock for just over a year now and I never have any issues with operating any of the buttons whilst my iPhone is mounted in its case. Wireless charging also is a number one plus for myself when the iPhone is in the case, it charges perfectly with no issues. The mount is solid, has no vibration issues on my 2016 breakout. All in all, why pay over double the price for an item that just comes in different colours?
Colors, can actually lie flat, currently supports wireless charging, made out of aluminum instead of plastic, actually protects that 80%glass iPhone when dropped but yeah...it’s just about the colors. It’s like asking why people buy ECE rated helmets when DOT gets the job done.
Comments from a Quad Lock user: 1) I prefer a black case anyway, but I do wish that Quad Lock would offer options in color and design. 2) The design for slightly easier install (Not even worth noting IMO) is what hurts the Rokform when adjusting. I would like to see Rokform change that. 3) Quad Lock definitely wins with construction material for the mount. Both Glass Reinforced Nylon (GRN) and Aluminum are sturdy, light, and good choices for materials on a superficial level. The smooth, rounded corners of the Quad Lock mount, coupled with the softer properties of GRN, make it FAR less likely to scratch paint or catch on clothing. The Rokform aluminum mount has very hard 90 degree edges that are more conducive to damage from, and to, other parts of the bike. To me it's a no brainer to use GRN for the mount material. 4) Not only does Quad Lock's case still allow wireless charging, they actually have a wireless charging mount head that you can use so it charges while in the mount. I don't know if you knew about that or not, but it's a game changer when using GPS while riding! I HIGHLY HIGHLY recommend it to anyone who will listen. It's just so damn convenient to run Bluetooth and GPS and never worry about a low battery. 5) My iPhone XS (and prior 7+) case has a perfect feedback for locking and unlocking. I can feel the click of each button very easily, and I wholeheartedly believe that you should try a new Quad Lock case. Either I've been lucky twice, or you've been unlucky once. 6) (And this is the reason why I'm even making a comment to begin with) Don't press on your screen like it's a damn keyboard! I've had a Quad Lock case for years and I've never even noticed that. 7) This is not an ideal solution for everyone, but Quad Lock makes a universal mount that you can do whatever with. I have on with a pop socket, and another with a magnet on it. I use the magnet one all the time while watching UA-cam videos and working at my job or playing mechanic at home. 8) Quad Lock offers a vibration dampener now for their mounts. 9) I think the center mounting point in the phone case is what helps with securing the phone to the mount on the Quad Lock. The way Rokform has their mounting offset isn't as straight on if you aren't thinking about it. 10) I think your assessment of value at the end is outright biased. I don't know why you are so biased for Rokform, but it definitely shows. The ONLY way anyone could justify spending $80 more for the Rokform would be if they just had to have a case that was offered in more than black. Other than that, the Rokform either does the same, or worse than the Quad Lock in every category.
Rokform cases don't work with 3rd party magna safe chargers. You'll have to invest in all new ones. Rokform's wireless charger mount doesn't lock like their non-charging mounts which makes them useless on motorcycles. Rockform's case is super heavy and hard to attach while riding. Finally, their ball mount is super over-priced and is of low quality. Don't waste $300 on Rokorm parts and then have to switch like I did.
Nails down absolutely Quad Lock is the one I like. The problem with both of them is unless you have Apple or Samsung, you get just an adaptor that you have to just tape to your phone's case. I'm not willing to trust my phone at 80 MPH to a piece of tape. Wouldn't it be easier (like, 2 seconds) to just plug in your phone to charge it rather than to drag it out of the case just to use the wireless charging?
I went with the Quad Lock Pro because it's metal, it's weatherproof, I'd rather have wireless charging over a magnet, I seldomly ever use my phone on flat surfaces, I don't have any problems with the buttons, and it's more affordable.
If all the hardware on the rokform is made in USA I’ll definitely buy it for the price. But if it just says made in USA but actually just assembled in the USA I’d buy the quad lock. I’m one willing to pay extra for true American made products.
I disagree. If I’m mounting my phone to my bars etc... it’s so I can use the navigation. Nav uses a lot of the phones battery and the ability to charge wirelessly is a huge asset... no fumbling with a charge cord! The Quadlock system offers this snd gets my vote!
Need to take the case off every night is more of a nuisance than the phone rocking on a flat surface and as for the buttons I am actually confused how you even had issues with quad lock? I've been using quad lock for near 3 years now and I do fast food deliveries on my bike never had any button issues 🙄 lastly I use wireless charging mount on my bike so I don't need to have a cable dangling or every time I get on or get off the bike I don't need to keep putting the cable in and out.... Why on earth would someone pay that much extra money plus sacrifice wireless charging and the ease of adjustment to near enough any position that you desire to when mounting, just so the buttons feels good and it doesn't rock on the table?? 🤦
To be fair to quad lock nearly all the issues you raised have been fixed. The buttons now feel really nice and super clicky the mount only had one bolt to tighten. I personally was very suspicious and not confident in the quad lock and then I received it and have been using it ever since 10/10 would recommend.
It appears that the motorcycle in question is a Harley...vibration is a feature of that style of motorcycle. I am using the Quadlock on a sport bike with the stem mount in Texas. Its been on for a few years and is as good as it was new, and I even have the vibration absorbing mount as well. If I crash hard enough to break the "plastic" mount the "aircraft grade" aluminum will break as well. A bulky case is annoying, its like going back in time. With the price difference between the two you could buy a desktop mount and a car mount and still come out ahead with the Quadlock.
I believe the Rockform emphasizes style over function, but the premium in price is unjustified, based on features function, and durability. So I guess you would be paying for style with the Rockform.
Hello. I just want to ask one thing. I’m thinking about quad lock mount, but I’d like to use it both on my mountain bike and my motorbike also. So there’s the question. Does the vibration dampener fit to a bike mount? Or is it only dedicated to motorbike mounts? I’d like to buy just one mount and use it on both. Thanks.
Been using the rokform cases and mount system for years , 3 different bikes, same mount and of course different phone cases , on a side note I currently have an s8 note and had to remove the magnet from the case because it had issues with the stylus .
It’s hard to justify the price, also the lack of waterproof wireless charger and waterproof smart usb adapter that quad lock has. Quadlock mount pro for me, mag case, wireless charger and smart usb, this Black Friday comes at the fraction of the price compare to Rokforn.
Sooo I have had the quadlock for about years amd been through a high side at 35-40 mph and my phone have flying off the mount. Though my phone was still safe. I mean I'd still suggest them
I used QuadLock on my Ducati 748.. but still problem of steering too big. So i need buy "Fork Clamp Mount" but only for Rokform! Not have Quadlock Clamp Mount? Fork Clamp Mount cost is 99,- Euro. Anyone have idea and tips? #QuadLock #Rokform Greeting
I returned both because of the cases. The Quadlock "bulge" in the back was a deal breaker for the same reason, it also was not compatible with ANY car magnet. The Rokform geniuses put the magnet in the phone case which ruined all my CC's, and hotel key. Just dumb. Also not being able to landscape a phone is just dumb. Great review!
Awesome review. Quad lock for me. I don't need a $150 mount when it's going on a MTB. Which I don't think that's the purpose of the rok form lock anyways
I’m lookin for a good mount for my gpz and this unfortunately this mount won’t work u are limited on the type of bike. The ram mount work great on my bike
Bought the Quad Lock for my Note 9. One of the tabs of the mount broke off at 70mph and I had to replace my screen. So less than a month in I was out $250 to repair and my camera doesn't work like it used to.
The thought of it is cool yet,, I’ll stick with my life proof and my ram mount have had it 2 years now with no problems besides losing those dam little rubber ends which are cheap !!
Either way I think biased a bit, I think trying to promote buy American made, makes sense if your American. I have the quadlock had a decent accident with mine on held up to the test, it is made in Australia and guess what I am Aussie.
I wonder what on god's good earth you talking about, I just dropped 107 € on the quadlock Pro mount and vibration dumpner, Iphone 13 case..That is not cheep!
I like the ruggedness of the Rokform case. I've dropped my phone a few times and no damage at all. I wish the handlebar mount was more adjustable. I see that Rokform now offers a wireless charger that works with the cases.
Thanks for the great comparison. You really nailed it. This should be a benchmark for anyone doing a product review or comparison video. And with what I learned and confirmed here, I am going to purchase the Rokform...thanks again.
Thanks buddy, great review, exactly what I was looking for, with the wireless charging option and an extra 10% discount the QL won, I await delivery and installation and cannot wait to use this and stay ahead of the game.
Question, the rock for Mount does it hold the phone securely on the handlebar without it moving from vibration that stays in one place. Are use it as a GPS the firm days and it’s so annoying when the phone is slowly moving down because of the vibration of my old milk
I got the RokForm, and I couldn't be more satisfied. Great case, great accessories (including a finger ring/stand that clicks into the locking grooves on the back of the case, and a vibration damper for the handlebar mount).
Thank you so much for including us in your in-depth review!
The same complaint is reported by some Quadlock users. As one person pointed out, the problem is not the mount, the problem is vibration generated by the bike together with inability of newer phones' stability control to tolerate. So some bikes will be more prone than others. If a mount has an arm incorporated this may magnify amplitude of vibration. Playing with position of the mount and angle of the arm might help. It might also be helpful to add a rubber or nylon washer at the base of the arm, if possible, to act as a shock absorber and remove some of the rigidity within the system. A potentially expensive experiment though.
You guys were fast on the scene ... ! 🐀 🐟 🐟 🐟
Galaxy users don't report that problem with either system. IJS
And the sponsor comments.
Shane Toner they now make an anti vibration quad lock mount if you’re still interested. Fixes the issue.
You really should do more reviews on products this by far as the best review I have seen on the Internet thank you for the video
With the rokform you can purchase the case and mount separate and purchase a Ram ball mount , which has the same easy release lever as the quad lock. Also uses a RAM mount system so you can REALLY control the phones position better than either mounts stock options.
I had been using the ROKFORM for the last couple of years and it has been a great product. Recently however I have switched to the QuadLock. My main reason was the case. The ROKFORM case was huge and in order to use wireless charging you had to cut the magnet out of the phone. I suppose the magnet does come in handy in certain situations but I found that I never used it that way. The QuadLock case is much sleeker which is good for me as I put it in my pocket a lot when not on the bike. I also have zero problems with the buttons. I don’t use my phone on flat surfaces so the rocking doesn’t affect me. I typically hold my phone and have the phone ring installed to help stabilize it. I found the mounting system on the QuadLock much more versatile and easier to find that “sweet spot”. The ROKFORM mount is just ok (for me). I also use a wireless charging head mounted on the bike so I don’t have to keep plugging and unplugging the phone all the time. The QuadLocks head is very secure and is weatherproof. The ROKFORM’s head is not weatherproof and does not “click in” when mounting. The magnet also has to be removed from the case in order to charge wirelessly. They do make special cases for wireless charging but not for my iPhone 12pro Max. These are both great products and you can’t go wrong with either of them. Personally, I think the QuadLock is more versatile with more mounting and accessorizing options. Again, I have used both [recently} and these are just my opinions.
I like the quadlock for several reasons, listed below. The key reason is flexibility and customization. If you only want to spend 70 to get it going, cool. If you want to go all in, expect to spend 200$ and up. I went all in, sorta.
********************
First, this is my quadlock head setup, that I use for 3 locations.
********************
(A)Weatherproof wireless charging head. I ride in the rain, and I hate excess loose wires.
(B)1" ball to standard quadlock head. I swapped the standard with wireless head. Then reused the standard head for my home Samsung DEX setup, where wireless charging isn't needed. it could Be though, if you used wireless dex with wireless charging.
(C) 1" to 1" ball socket Ram Mount arm. Quadlock sells their own double ball joint arm, but it's a non standard size. If you went with quadlock, you have to stay in that ecosystem. They don't force you. I already had several 1" ball adapter stuff, for my truck driver GPS units.
**********************
**********************
Second, this is my base setup for 5 different locations.
**********************
(A) 2018 Volvo Semi truck. I have a 1" hand rail near the driver side air vents. I use a 1" bar clamp to 1" ball adapter. With a USB C cable neatly routed for power.
(B) 05 Harley Dyna Superglide. I'm using some mid bend thrashin bars. I use the same style clamp, as in the truck except chrome. For power a battery tender to usbA, with a 6' usbA to usbC cable neatly routed.
(C) 22 Kawasaki Ninja 650. I mount it to the stem. Unfortunately the quadlock stem only works with circular stem holes. Kawasaki uses a hexagonal stem hole. So, a hexagonal stem mount to 1" ball adapter. I also use this location to run my pcV, when I need to. For power, I'm using quadlocks battery to USB adapter and a 6' usbA to usbC cable, neatly routed.
(D) Nexdock 360, for on the go Samsung Dex + Nintendo Switch. I use the key ring adapter, to prop my phone up in landscape. It's also useful for my small hands to keep ahold of my big ass phone.
(E) Skull n Co Switch dock, also for samsung dex. A simple 2 hole flat base to 1" ball, screwed into my desk. With the wires for the SkullNCo jump gate routed cleanly.
****************************
Okay, sorry for that long winded explanation. If you read it though, I truly use my phone everywhere, and try to maximize the usefulness of my NON ESSENTIAL purchases. Which is a luxury in and of it self. I'm a truck driver, who is always On the go. Ensuring my phone is protected and fully charged is mandatory. For my work, and off duty entertainment.
For the intended purpose, motorcyclists phone mount, you can buy what is necessary. Then add more if that suits your lifestyle.
Edit: Oh Yeah! I forgot! The main reason I went with quadlock is the stabilizing base adapter. I'm using an expensive ass phone, and I wanted to protect its camera modules.
So really, the quadlock seems cheaper... but when you fully utilize it, it's easily twice as much as rokform.
Good review of both I have the quad lock I actually really like it, I feel like my $1K phone is secure after riding 1700 miles in a day my phone didn't move or make me feel like it was gonna fall off.
looking at the Rokform case, how does it work in lanscape after getting some bumps, because the mounting point is not at the center of the phone. at the price of a Rokform you get a Quadlock with a charger.......just saying. plus how does the compass work with a magnet on the case?
im gonna try gearlock from spigen and it seems the price is reasonable. these 2 are super expensive
Quadlock is actually $80 with 10% coupon code and it comes with a mount and a case
Rock Form is giving 20%
In the video you only showed the phones mounted vertically. Can they be mounted horizontally by just mounting it 90 degrees out?
Yes
No wireless charging and it's no problem for you? :O Now wireless charging is the best feature in today's phones. Now how I can understand you chose everyday take off case than plug in cable? lol
Hi are both interchangeable i.e. adapter and case..
no they are not
No wireless charging would be a deal breaker. Having to remove the case all the time would wear it out quickly.
saliston I think you can remove magnet to allow wireless charging
I was a rokform fan until they stopped carrying android cases outside of . the universal mount is trash. quality option while i had an iphone though
Rockform still comes out on top. Can you say 40% Military Discount...
Whoah! How do you pull that off?
I am a current Quadlock user and am 100% satisfied no complaints at all
My only complaint is that you easily break the black clip on the top when tightening the center screw. This fortunatly doesn't happen on the (expensive!) Wireless charging mount
@MrJordiboy i know that haha. But my monkey hands didn't think it was tight enough haha
Ùu,uiuiùiūu1,
My one big complaint is that the case is basically shit, its too smooth, there is no grip strips on the sides of the phone so that it doesnt slip out of your hand. Most of my cases have some sort of textured surface on the sides. This smooth feeling case doesnt really feel that good to be honest. I wish they would do something what dbrand does. Put tiny textured dots on both sides of the phone. Then it is an everyday case, right now I just use the case when I am riding which is not everyday
I've been running the Rokform on every phone for many years now. While off roading, commuting, or on the bike, this brand has never let me down. Also, the ability to mount your phone using the magnet while in the garage, or wherever, has been so useful over the years. Great comparison, Rokform has a customer for life here.
0
I've been using quadlock for about 7 years now and it's absolutely amazing!
I use, car, motorbike and bike mounts and they've been spot on every single time!
Doesn't feel cheap at all!
Totally agree
it also isn't cheap ;)
Can you use it for a pixle 5 phone?
@@-Xaverius you're right, it's not cheap but its value for money.
@@dangrimes5078 yes, check out their website. They have a case for almost all phones! Cheers
You need a SP Connect vs Quad Lock vs Rok Form.
Thanks for the informative review. Initially, I was interested in the RockForm, but the cost of it led me to this video of my second choice. Really like the Rock Form the best, but since I mostly go on short day trips on a cruiser, I may settle for the Quad Lock. As a casual rider, it's hard to justify the price difference. Thanks again for a great video!
4:10 well then just plug it in to charge it. thats much easier and faster than removing and reapplying the case every time you want juice.
The lack of wireless charging is a deal breaker for me, and quadlock just came out with a car mount with integrated wireless charging
Agreed, but quad lock is a fail too depending on which phone you have.
Both companies should be ashamed they’ve got $70 knickknacks they both have major flaws that are frankly unacceptable. Blows my mind that nobody has wipe them both out yet
As a former ram mount user , this video finalized my decision to go with the rokform. I could not be happier. Mine is on a 2017 street glide with paul yaffe 10 in monkey bars . Very high quality and holds phone very solid . A little learning curve to mount and unmount phone but I am used to it after 5 to 10 uses. Well worth the money. I love it
I used QuadLock for almost a year now and find myself looking for something else for one main reason: The composite locking face wears and allows lateral play over just a couple of months of constant use. Now, to their defense, QuadLock will send you a replacement because their customer service is great. However, its just too much of an inconvenience to have to email them....wait...swap it out...only to have to repeat the process a few months later. It would be awesome if they sold these parts on their site...but unfortunately they do not. Bummer. I may have to give Rockform a go just because of the all metal mounting surfaces. Great review and solid pro/con for both. Thanks!
Thanks for the important feedback on Quad Lock. Will look into Rockform now since it has metal mounting......
Thanks for info.
Yeah this same thing has happened to me TWICE - now I know that the bigger and heavier the phone - the faster the lock face wears away with that white residue and your phone just gets less and less secure. Switching to RokForm is the plan soon - but I haven't seen anyone point out if the "lock face" on RokForm is aluminum or plastic...?
I’m a simple RAM man. This review is tempting me to get a rockform
if the Rockform had a Ram Ball capable mount i would have bought already
@Dam Rymarz but it does lol
If you're curious how the quad lock holds up after 2 years of courier work and over 10.000 mounts and dismounts: ua-cam.com/video/--XfAO6FyP0/v-deo.html
What you should include in this is the fact that Rockform on a HD will ruin your camera. Especially with an iPhone pro. And that quad lock has a vibration dampener that prevents that
Happened to me on a fz07. switched to quadlock with dampener, no issues
The magnets in the rokform cases are removable, you do not need to use the case with the magnet, not sure why he didn't specify this.
well that would have been nice to know... smh already went with quad lock
I'm using Quadlock and I must say I agree on the side buttons not being as responsive but I've gotten car, desk and bike mounts and I'm very very happy, I also got two wireless chargers and they work great, although Rokform's seems better in materials I'm sure I'd still keep this one, even for the same price. Thanks for all the work of putting together this review!
I use the quadlock and have it for just over a year. I like it pretty well. My biggest biff is trying to get it to click onto my belt clip. Getting it on the handlebar mount is simple. I've never had an issue with it so far. Great review by the way. 😎😎
I used to love RAM mounts but after a scare (I was lazy, no rubber bands on rough road) I started to look. I also needed to sort out a wireless charging solution. Different people use phones differently of course but (1) the buttons on the side? I almost never use them (2) bump/rocking on the desktop? Dunno, I use the phone in my hand or in a mount. But the thick case and no wireless charging on the Rokform - I could not live with that. Plus the ecosystem of Quad Lock is so large, there's a solution for almost every problem. Not quite RAM level but you can interface with RAM, so good to go
One thing I have noticed. Is that the Rokform is that the magnet interferes with the Note 9's stylus. It also seems to throw off the compass and rotation sensor. Sometimes locking my phone in landscape mode.
Quad lock all day..... The Rockform bracket is too bulky & having to keeping taking the phone out of the case to charge it is just a no no!
they both have chargers now
Look at SP Connect - same price as Quadlock but with an Aluminium + Steel fittings made mounting systems.
Had my Quadlock for just over a year now and I never have any issues with operating any of the buttons whilst my iPhone is mounted in its case. Wireless charging also is a number one plus for myself when the iPhone is in the case, it charges perfectly with no issues. The mount is solid, has no vibration issues on my 2016 breakout. All in all, why pay over double the price for an item that just comes in different colours?
Colors, can actually lie flat, currently supports wireless charging, made out of aluminum instead of plastic, actually protects that 80%glass iPhone when dropped but yeah...it’s just about the colors. It’s like asking why people buy ECE rated helmets when DOT gets the job done.
My rokform case charges fine with Samsung wireless charger. Just have to move it slightly down
The newer ones do now yup!
@@BikeNBird also work just fine on my s9+ case. At least a few years old. Just ordered s21 ultra case so I'm hoping it works also
Comments from a Quad Lock user:
1) I prefer a black case anyway, but I do wish that Quad Lock would offer options in color and design.
2) The design for slightly easier install (Not even worth noting IMO) is what hurts the Rokform when adjusting. I would like to see Rokform change that.
3) Quad Lock definitely wins with construction material for the mount. Both Glass Reinforced Nylon (GRN) and Aluminum are sturdy, light, and good choices for materials on a superficial level. The smooth, rounded corners of the Quad Lock mount, coupled with the softer properties of GRN, make it FAR less likely to scratch paint or catch on clothing. The Rokform aluminum mount has very hard 90 degree edges that are more conducive to damage from, and to, other parts of the bike. To me it's a no brainer to use GRN for the mount material.
4) Not only does Quad Lock's case still allow wireless charging, they actually have a wireless charging mount head that you can use so it charges while in the mount. I don't know if you knew about that or not, but it's a game changer when using GPS while riding! I HIGHLY HIGHLY recommend it to anyone who will listen. It's just so damn convenient to run Bluetooth and GPS and never worry about a low battery.
5) My iPhone XS (and prior 7+) case has a perfect feedback for locking and unlocking. I can feel the click of each button very easily, and I wholeheartedly believe that you should try a new Quad Lock case. Either I've been lucky twice, or you've been unlucky once.
6) (And this is the reason why I'm even making a comment to begin with) Don't press on your screen like it's a damn keyboard! I've had a Quad Lock case for years and I've never even noticed that.
7) This is not an ideal solution for everyone, but Quad Lock makes a universal mount that you can do whatever with. I have on with a pop socket, and another with a magnet on it. I use the magnet one all the time while watching UA-cam videos and working at my job or playing mechanic at home.
8) Quad Lock offers a vibration dampener now for their mounts.
9) I think the center mounting point in the phone case is what helps with securing the phone to the mount on the Quad Lock. The way Rokform has their mounting offset isn't as straight on if you aren't thinking about it.
10) I think your assessment of value at the end is outright biased. I don't know why you are so biased for Rokform, but it definitely shows. The ONLY way anyone could justify spending $80 more for the Rokform would be if they just had to have a case that was offered in more than black. Other than that, the Rokform either does the same, or worse than the Quad Lock in every category.
Rokform cases don't work with 3rd party magna safe chargers. You'll have to invest in all new ones. Rokform's wireless charger mount doesn't lock like their non-charging mounts which makes them useless on motorcycles. Rockform's case is super heavy and hard to attach while riding. Finally, their ball mount is super over-priced and is of low quality. Don't waste $300 on Rokorm parts and then have to switch like I did.
Nails down absolutely Quad Lock is the one I like. The problem with both of them is unless you have Apple or Samsung, you get just an adaptor that you have to just tape to your phone's case. I'm not willing to trust my phone at 80 MPH to a piece of tape.
Wouldn't it be easier (like, 2 seconds) to just plug in your phone to charge it rather than to drag it out of the case just to use the wireless charging?
I went with the Quad Lock Pro because it's metal, it's weatherproof, I'd rather have wireless charging over a magnet, I seldomly ever use my phone on flat surfaces, I don't have any problems with the buttons, and it's more affordable.
If all the hardware on the rokform is made in USA I’ll definitely buy it for the price. But if it just says made in USA but actually just assembled in the USA I’d buy the quad lock. I’m one willing to pay extra for true American made products.
I disagree. If I’m mounting my phone to my bars etc... it’s so I can use the navigation. Nav uses a lot of the phones battery and the ability to charge wirelessly is a huge asset... no fumbling with a charge cord! The Quadlock system offers this snd gets my vote!
Rockform is $39.99 10.29.19 also wireless charging now works the moved the lock position up higher allowing charging
the case is $39.99 unfortunately the bar mount is $119.99
Need to take the case off every night is more of a nuisance than the phone rocking on a flat surface and as for the buttons I am actually confused how you even had issues with quad lock? I've been using quad lock for near 3 years now and I do fast food deliveries on my bike never had any button issues 🙄 lastly I use wireless charging mount on my bike so I don't need to have a cable dangling or every time I get on or get off the bike I don't need to keep putting the cable in and out.... Why on earth would someone pay that much extra money plus sacrifice wireless charging and the ease of adjustment to near enough any position that you desire to when mounting, just so the buttons feels good and it doesn't rock on the table?? 🤦
To be fair to quad lock nearly all the issues you raised have been fixed. The buttons now feel really nice and super clicky the mount only had one bolt to tighten. I personally was very suspicious and not confident in the quad lock and then I received it and have been using it ever since 10/10 would recommend.
It appears that the motorcycle in question is a Harley...vibration is a feature of that style of motorcycle. I am using the Quadlock on a sport bike with the stem mount in Texas. Its been on for a few years and is as good as it was new, and I even have the vibration absorbing mount as well. If I crash hard enough to break the "plastic" mount the "aircraft grade" aluminum will break as well. A bulky case is annoying, its like going back in time. With the price difference between the two you could buy a desktop mount and a car mount and still come out ahead with the Quadlock.
I believe the Rockform emphasizes style over function, but the premium in price is unjustified, based on features function, and durability. So I guess you would be paying for style with the Rockform.
Hello. I just want to ask one thing. I’m thinking about quad lock mount, but I’d like to use it both on my mountain bike and my motorbike also.
So there’s the question.
Does the vibration dampener fit to a bike mount? Or is it only dedicated to motorbike mounts?
I’d like to buy just one mount and use it on both.
Thanks.
Been using the rokform cases and mount system for years , 3 different bikes, same mount and of course different phone cases , on a side note I currently have an s8 note and had to remove the magnet from the case because it had issues with the stylus .
Good to know that the magnetic part is removable... That was going to be a big deal for me... S9 note!
It’s hard to justify the price, also the lack of waterproof wireless charger and waterproof smart usb adapter that quad lock has. Quadlock mount pro for me, mag case, wireless charger and smart usb, this Black Friday comes at the fraction of the price compare to Rokforn.
It’s quad lock for me. Just got the fork stem mount with the dampener and i was not let down at all would recommend
Sooo I have had the quadlock for about years amd been through a high side at 35-40 mph and my phone have flying off the mount. Though my phone was still safe. I mean I'd still suggest them
I used QuadLock on my Ducati 748.. but still problem of steering too big. So i need buy "Fork Clamp Mount" but only for Rokform! Not have Quadlock Clamp Mount?
Fork Clamp Mount cost is 99,- Euro.
Anyone have idea and tips?
#QuadLock
#Rokform
Greeting
I returned both because of the cases.
The Quadlock "bulge" in the back was a deal breaker for the same reason, it also was not compatible with ANY car magnet. The Rokform geniuses put the magnet in the phone case which ruined all my CC's, and hotel key. Just dumb. Also not being able to landscape a phone is just dumb. Great review!
did you see Quad Lock has car setups?
you can use your phone in landscape mode with Rokform
I'll stick to the x mount. I prefer having my own stylish/sturdy cases on my phones that still work with wireless charging.
I've used quadlock which is a great mount but the plastic wears out over time. I now have the rockform which appears much superior to the quadlock
If you are Military, police, fire, etc. GovX partners with rokform. $88 for the mount and $30 for the case after the discount.
Awesome review. Quad lock for me. I don't need a $150 mount when it's going on a MTB. Which I don't think that's the purpose of the rok form lock anyways
You should go back and do the rokform vs the quadlock pro that came out. I'm sure they bridged the gap in quality.
Great review, not great, but perfect. You nailed it! Just as it supposed to be. Thanks!
I’m lookin for a good mount for my gpz and this unfortunately this mount won’t work u are limited on the type of bike. The ram mount work great on my bike
I think it time to review again. Solid review but quadlock has fixed a ton of what you hit on other then color cases.
You had me at S Texas summer....lol.....I live in SA and I gotta say, Texas can be brutal
The rockform has a magnet case. It magnetized my iPhone 11 Pro Max causing it not to work.
Very informative review. Video dropped just when I needed it. I just started looking at phone mounts. Thank you B&B
"I like the all aluminum construction but adjusting is a pain in the ass and you may not be able to hit the sweetspot... but it's a better mount"
New to riding. Great video. My question is, do you need some screen to shield the phone from overheating in the sun?
Day in and day out but you have to take the case off at night? So just day in. How much did they pay you for this review?
I actually have the rokform and I have a magnet charger and it works perfectly fine without having to take off the case
the quad lock case is overall much smaller and lighter which is definently a deal breaker for me easy choice for quad lock
Decided to go with quad lock because rokform is just a little to much for a phone mount system
Bought the Quad Lock for my Note 9. One of the tabs of the mount broke off at 70mph and I had to replace my screen. So less than a month in I was out $250 to repair and my camera doesn't work like it used to.
Too funny
No wireless charging.
I still plug in to charge.
I feel so... last week
How’s is it not a fair comparison!! Literally 2 takes on the same concept in the same arena and dark market!!
A thing with the quadlock though is there is an option to get a aluminum version of the mount
One of the pros in this video seems to be a moot point now that the quad lock pro aluminum mount is out.
i would choose the all black color quad lock ( pro version ) it fits color of my bike
Lol anyone notice that he chose rokform and in the description see he has a discount code to them? Bias review?
I’ve just gone with Quad Lock, had too many Rokform cases fall apart.
i've have 3 quadlocks with broken mounting lugs in the space of 4 months, case is good though
Andrew494 - You must be a hamfisted idiot, then? Or a Rokform shareholder ... lol
My Rockform mount has screwed up two my iPhones. The magnet jacked my camera function up totally
It’s not the magnet. It’s the vibrations that destroy the optical image stabilization mechanism. Happens often to off-road riders especially.
The thought of it is cool yet,, I’ll stick with my life proof and my ram mount have had it 2 years now with no problems besides losing those dam little rubber ends which are cheap !!
Thanks for the great unbiased review! Would you be able to do a review of the SP Connect case/mount and compare it to the Rockform and Quad Lock?
It's superior since it's the same CNC aluminum that Rockform uses and way cheaper.
Either way I think biased a bit, I think trying to promote buy American made, makes sense if your American. I have the quadlock had a decent accident with mine on held up to the test, it is made in Australia and guess what I am Aussie.
I wonder what on god's good earth you talking about, I just dropped 107 € on the quadlock Pro mount and vibration dumpner, Iphone 13 case..That is not cheep!
That was the price 3 yrs ago when this video was made
Why not just plug the case in and forget the wireless charging?
Great video. I literally knew nothing about either of these two and now I feel well informed. Thanks a bunch.
Had a Rokform mount on my bike and in less than 6 months my iPhone’s camera died
The quad lock bump is so Annoying! I'm glad you mentioned it in your video.
more expensive more quality more beautiful no comparison rokform 🥇 🥇
I like the ruggedness of the Rokform case. I've dropped my phone a few times and no damage at all. I wish the handlebar mount was more adjustable. I see that Rokform now offers a wireless charger that works with the cases.
Thx for the vid now i believe ddn when he talks about his Rockform
That’s a damn good review Justin
Good video. 👍🏻 I've tried both and going back to Rokform.
Can you use rokform case with quadlock mount and vise versa?
Thanks for the great comparison. You really nailed it. This should be a benchmark for anyone doing a product review or comparison video. And with what I learned and confirmed here, I am going to purchase the Rokform...thanks again.
You're right. This comparison video is the gold standard for YT reviews.
Now, the Quadlock is well over $100, closer to $150.
Fortunately in 2022 I don’t think you’ll have the same issues
Thanks buddy, great review, exactly what I was looking for, with the wireless charging option and an extra 10% discount the QL won, I await delivery and installation and cannot wait to use this and stay ahead of the game.
Question, the rock for Mount does it hold the phone securely on the handlebar without it moving from vibration that stays in one place. Are use it as a GPS the firm days and it’s so annoying when the phone is slowly moving down because of the vibration of my old milk
The Rokform mount doesn't move at all. I even use the same mount on my dirt bike for 70 minute enduro races.
Now can we get a review of the Q-Mount phone mount vs the Rokform
Can you use the rokform case with quad lock mounts?