✅ How to Perfect Metal Work The Side of Rolled Over Nissan Frontier
Вставка
- Опубліковано 3 кві 2021
- In this video I will show you the steps I take to fix up all of the damaged sheet metal on a rolled over Nissan Frontier. If you have the right tools and the know-how than just about anyone can get the metal work done just about perfect. I will show you step-by-step instructions on how I go about performing this repair with my spotter tool. It is very important to do the metal work this way to save yourself a lot of time and frustration down the road when the time comes to do the body filler (Bondo) work.
How To Build your Own Spotter: • Car Body DIY Spotter E...
Hydraulic Spreader Kit: amzn.to/3ulVzlL - Авто та транспорт
From all the bodywork videos on youtube I think I learned the most from yours. No over the top shouting, just straight to the point explanations and calm attitude. Thanks for the content and keep up the good work! I hope you get more views...
Hey Peter, appreciate the comment.. I try to make my videos as informative as possible, so folks could learn something instead of just watch a guy fix a car with no explanation as to what it is that he's doing....
came here from a comment from bluecollarkyle, the person mentioned you and paintsociety,you gained a new sub
Thanks for subbing! And welcome aboard Richard!
I always look forward to seeing your videos thank you so much for explaining the process of the repairs that’s going to be a good looking truck when you’re finished
He's definitely the best on UA-cam at being transparent and actually showing (teaching) us his knowledge. He deserves to have more subscribers than any other car channel I follow.
Very welcome, I figured if I'm gonna make videos, then I might as well share some knowledge and hopefully folks out there will learn something new !!
You got the best puller and best diy spot welder. I wish they still make puller like yours. God Bless!
Thank you ! This spotter truly is the best tool for car metal work that I've ever used. Don't know how I got by without it all those years... I do have the puller with attachments available for sale now... I'll be making an announcement on them soon
@@fix206 waiting for your announcement vdo! I'm not a auto mechanic but my bro is! I wanna buy it as a NY gift to him.
I love watching the spotter work
I love doing spotter work... No joke, it's almost therapeutic !
Great job!!
Thank you! Cheers!
Great video as usual !!! Keep them coming..
Thanks! Will do!
Can’t wait for the next video
wording on it as we speak... :)
Bro you're the best
Mohamed, thank you ... !
Always great watching your videos...thanks for sharing! Learning alot
My pleasure! Love sharing the knowledge!!
Wow that was impressive!!
Thank you Sir !
Always watching. Good job. From Brazil!!!
Thank you so much!
Luv your videos. Keep up the good work.
Thanks, will do!
Great work, love the before and after shots. What a difference. Immediate “like”. 👍
Thanks Chris, think I'm going to do more before and after shots. It really shows a good comparison as to how far the repair had come..
Excellent idea with the fan.thanks
Thanks Geoffrey... I recently showed the fan "trick" to a friend of mine who is a bodyman and he said: "I can't believe how simple this is and why did I wear a dust mask all these years??" LOL
really amazing work mate, and really cool to see you get this done and get it done right. great work getting as much of the metal work done and will have to check out that video with the spot weld pull tool.
I used to hate doing metal work because it used to be such a daunting task. But once I built my spotter tool, metalwork became something that I really enjoy doing. When you have the right tools for the job, it just makes the job so much easier and enjoyable to do. I also feel that my quality of work went up due to using that tool..
You done a smoking good job and that dent puller is awesome.
Thank you so much, and that dent puller is no joke, that thing is amazing and I enjoy using it very much.
Kind of funny watching this after seeing the truck straight and in primer. Must say though, I think it looks better in person. Good job.
Thanks Matt, looks like we're about to get a good streak of dry weather, finally should be able to get this thing painted !!
Good job 👍 nice work!
Thank you! Cheers!
Nice and straight now 👏
Sure it :)
Very good 😊😊😊
Thank you! Cheers!
Good vidéo , thank you teacher :-)
You are very welcome! And thank you for watching !!
when a nice guy makes a video, 155 likes without any dislike
Thank you Bagus, I do appreciate a positive comment 👍 Cheers, my friend !
Quando o cara é bom faz parecer que o serviço é fácil... Parabéns!
Abrigado amigo !!
I love from Indonesia. body repair
👍👍👍
Good job !
Greetings from Romania !
I have the same car but in europe is Nissan Navara with 2.5 diesel engine.
These are great trucks, I wish they did offer them with a diesel variant in the United States, because I would for sure get one over petrol model..
Ideas very goob y a job wind money... ÉXITOS MY TEACHER 🤑
Thank you !! 👍👍
عمل رائع جدا جدا جدا.....👍👍👍👍👍👍🥰🥰🥰
Thank you!!
Muy bien Bro saludos desde Honduras🇭🇳Excellent bodywork 👍👍
Gracias Marco !!
Gracias por estos vídeos tan buenos saludos de este venezolano 🇻🇪 en Trinidad and Tobago 🇹🇹 cómo se llama la herramientas 🛠 que aplica descarga eléctrica y extrae el metal
@@donjulianacosta4268 spotter tools sería como un saca golpes en este canal puede mirar videos donde el amigo armo uno con materiales caseros saludos asta Trinidad 👍👍
@@donjulianacosta4268 ua-cam.com/video/j6UgtCN5vzU/v-deo.html
@@Medinabros2007 gracias después vi ese vídeo
Nice work on the repairs as usual. Seeing that you only had a week to get the repairs done before the inspection, hopefully that means more videos coming soon. One thing I noticed with your spotter, is that it seems to do less panel damage than commercial units, as yours doesn't seem to leave holes in the panel like I've seen on other channels when they use a spotter. Have you ever watched Arthur Tussik do "lead wiping" which is almost a forgotten art? That sure takes some skill. I bet if you had more time, you could have straightened out that back door! As always, I'm looking forward to your next video and I hope you have more time to get back to the 1948 Chevy, as that's a really interesting project. All the best from Queensland Australia, where we've finally had some good rain to break the long drought we just went through.
Cheers Bruce, we have made it to the inspection and passed it, so the truck is licensed and street legal. However the weather did not cooperate enough to where we could get everything painted before the inspection. Hoping to spray it in the next few days, but I have enough material for another one or two videos before the paint video is posted. As far as the holes left behind on panels after spotter use, I do get those every now and then. Usually those will happen in areas that are a bit more rigid such as cab corners, because it takes more force to lift the metal then it would on a flat panel that has more give... Hope my explanation made sense.. I may end up doing some leading on the 1948 truck, never done it before but it is something that I'm interested in trying out. As far as the old school truck goes, I had to put that project on a short hold while while the Nissan is getting fixed up. I'll have more videos on that out shortly
I enjoyed the video, This is going to be nice!. I bet your Son is happy!
Oh he is definitely happy. He was at his moms house for a couple of weeks and since it's his main form of transportation he had no choice but to drive it around with a white door and primer down the side since the truck wasn't finished all the way :-)
In that case, he will appreciate the finish results even the more...... I look forward to the next video. Thanks for posting.
Even though it's not finished he said he still loved driving it for that duration of time. And I'm sure once it's all one color he'll love it even more :-)
@@fix206
👍🏻 An awesome Daddy and Son Project.... :-)
It sure is, I know he'll learn a lot throughout this project. Now he's thinking about picking up another rig from the auction so he can fix it himself and make some money in the process :-)
Hey man. Awesome job. Do you have any new videos coming out.
Working on it
Great video series. I have a question. How do you protect the backside of panels you have spot pulled? The pain certainly burns on the backside where you weld. Have you found a solution?
A coat of primer will take car of that 👍
@@fix206 do you have any tool for reaching those areas?
Can you do body filler and wait a couple of days for the primer or do you need to do the primer as soon as possible before the body filler absorbs atmospheric moisture? What about after the primer, can you wait before the base coat or do you need to go as fast as possible?
If the car is in the garage or something then there is no need, if it is sitting outside, in theory you should prime the body filler to encapsulate it. Once the car is in primer you don't really have to worry. You can even let the car sit for a year and then get it painted
Good stuff. What's the name of that tool that pulls out dents?
I built that tool, here is a video on how I did it: ua-cam.com/video/j6UgtCN5vzU/v-deo.html
Hi, the spot push system, could be good for repare motorcycle gas tanks dented? Could pircing the sheet metal?
Thanks in advance for the reply.
Yes, it can absolutely be used to fix motorcycle gas tanks, just make sure that tank is 100% empty and had been ventilated for couple of days prior to using this tool on it to make sure you won't cause an explosion... This tool can be used to work on most metal panels
@@fix206 You do a nice job.
In the case of motorcycle gas tank, the thin shet is not a problem? I´m talking about pirce it.
Thanks you so much for reply.
Regards from Argentine!!
This tool works great on thin metal, I will have the black handle puller with red bases available here for sale pretty soon
@@fix206 Ok Thanks yuou!!!
Bro. You don't use hammer n dolly tool. Is that a preference?
I do use it sometimes when I see fit, but when I work with a spotter most times the need for hammer and dolly just isn’t there
What happened to 48 Chevy build??
I just put it on a quick hold while this Nissan project gets quickly knocked out of the way. Nissan doesn't have much more to go so I'll be right back on the 48 here in no time !!
Can you make dent puller machine for me brother whatever your price?
My friend, I've made a video sometime ago about how I built it. It's not that hard and just about anyone can build one. I've made a very detailed video on how I did it. Here's the link ua-cam.com/video/j6UgtCN5vzU/v-deo.html. Pretty soon I will start selling circuit board that controls this machine much better than the electronic components in the video
Whatever is your hard work, I will give you all of the money?
My friend, I've made a video sometime ago about how I built it. It's not that hard and just about anyone can build one. I've made a very detailed video on how I did it. Here's the link ua-cam.com/video/j6UgtCN5vzU/v-deo.html. Pretty soon I will start selling circuit board that controls this machine much better than the electronic components in the video
Were are the truck 🚛🚛 project???
I'm still working on the old truck, I will have videos on that in just a bit, have to finish this Nissan truck first and then I'll continue on the other truck for sure !
@@fix206 I wait for videos of your old truck 🚛, congratulations for your job on Nissan.
Т.е. это был salvage title, и инспекцию надо проходить в полиции в штате WA по пред. записи ? Спрашиваю, потому что я купил с WA недавно salvage title (но, тайтла не было, только bill of sale), и в Техасе я мог пройти обычную инспекцию (не у копов) в любой момент и получить тайтл после этого. Просто интересно как в WA это происходит
Меня интересуют те же вопросы.
Да, машина получается Salvage тайтл, инспекция только по записи, сейчас в связи с вирусом на запись попасть вообще почти нереально, раньше можно было оформлять через Oregon, там инспекции нету. Просто оформляешь машину и всё, но за последний год кой какие правила поменялись и эту лазейку для резидентов штата Вашингтон прикрыли. Думаю, скоро сделаю видео с небольшим обзором процесса инспекции в нашем штате. Думаю многим может будет интересно узнать как и почему это все работает.
@@fix206
Это хорошая идея. Это видео будет очень интересным. Спасибо.
Надеюсь тебе понравится! Phillip, your Russian is quite good 😂😂
@@fix206
Thank you. I did like it!
I am Gary from AISKITS team and I hope to work with you. We produce high quality auto headlights and auto supplies, can I send you an email?