How to install oil pan gasket. 3.4l Toyota 5vzfe. Tacoma, 4runner separating the engine & trans.
Вставка
- Опубліковано 4 лис 2022
- Final touches for the 1st gen Tacoma project.
@funjunkiegarage
www.etsy.com/shop/RAKandSAKart
throneofiron.bandcamp.com/
profile.php?...
#toyota4wd #doitdamnit #Funjunkie #myhappydriveway #toyota #alwaystoyota #ohwhatafeeling #tundra #tundralove #lovemytundra #tundraoffroad #tundraoffroad4x4 #toyotatundra #toyota4x4 #yota #sr5 #teamyota #overland #offroad #tundramafia #teq #1stgenTundra #2uz #2uzfe #toyotafreaks #toyotalife #tundra4life #tundralife #stellarbluepearl #tundraadventures#toyota #alwaystoyota #ohwhatafeeling #4runner # #toyota4runner #3rdgen4runnermafia #4runner4life #4runneroffroad #toyota4x4 #toyota4wd #yota #sr5 #teamyota #overland #adventure #offroad #explore #teq #3rdgen4runner #myhappydriveway #Funjunkie #doitdamnit #toyotafreaks #toyotalife #lovemy4runner #5vz
#toyota #alwaystoyota #ohwhatafeeling #Tacoma # #toyotatacoma #Tacoma4life #Tacomaoffroad #toyota4x4 #toyota4wd #yota #teamyota #overland #adventure #offroad #explore #teq #1stgenTacoma #myhappydriveway #Funjunkie #doitdamnit #toyotafreaks #toyotalife #lovemyTacoma #3rz
Toyota,4wd,1st gen,3rd gen,4runner,Tundra,T4,Funjunkie,White,Blue,offroad,off,road,adventure,fun,camping,towing,install,mods,modifications,overland,rig,4x4,build,homemade,DIY,fab,fabricate,project,wheeling,welding,armor,sliders,skids,skid plate,boatside,bumpers,lift,lifted,bumper,locker,lockers,IFS,double locked,lift,lifted,4.88,4.88s,5100s,Bilstien,limited slip,airbags,Red,Tacoma,3.4,5vz,4.7,2uz,wheelin,enjoy, - Авто та транспорт
How is that gasket holding up?
It's doing fine
No leaks or issues.
Just bought the feel pro from rock auto and there is 2 gaskets, any reason why?
Hmmmmmmm, no reason I can think of.
A packaging error most likely.
@@funjunkiegarage well online it states that it comes with 2 gaskets lol I just wasn’t sure if there was any real reason why
That is strange, I can't think of any reason either.
A spare in case you mess one up mayhaps.
The fel pro is a rubberized cork gasket.
I personally was unable to find a solid rubber one.
Mistitled - I thought it was an oil pan gasket replacement?!?
I guess it's not a replacement if it didn't have one to begin with. I'll update it to say install .
Thanks for watching and commenting
Where can I find the gasket for the oilpan. ? tks
I got mine from Rock Auto.
They are available at most auto part stores.
I used the cork/rubber type.
Good luck with your project.
Thanks for watching and commenting.
@@funjunkiegarage Thankyou very much Sir. I am scottish living in Thailand . Never seen a gasket on the 5vzfe before. But always thought there should be one. thai garages would use the glue and tighten up fully immediately . therefore making a mess of it. And even worse they would put oil in straight away. kkkkkk
You're welcome.
The 5vzfe doesn't have a gasket from the factory.
The FSM says to use sealer and tighten flat. Which is crazy in my opinion. I always use a gasket if I have one apart.
Thanks again for checking out my channel.
@@funjunkiegarage sir. the gasket arrived in thailand . THEY sent two gaskets . Is there a reason for them sending 2. I see most adverts on ebay have the foto of two but not sure why, unless you have to fit the two gaskets on top of each other . tks
Definitely do not stack gaskets.
Not sure why they show 2 or sent 2. But only use 1.
Hope it takes care of the issue. Let me know how it turns out, or if you have any other questions.
Thanks for watching and enjoy your project.