10 Things You Didn't Know You Could Make With a LASER ENGRAVER (NEW Sculpfun S9 Review)
Вставка
- Опубліковано 31 тра 2024
- How to make cool DIY laser engraver/cutter projects out of plywood, paper, rubber, cardboard, clothing and this machine can even engrave STAINLESS STEEL and can cut more than 10mm thick wood.
BUY the Sculpfun S9:
Official store: shrsl.com/45klk
Or here: hobbylasercutters.com/go/scul...
Use my coupon "BGdedaba" and get it for only 189$!
Or here: www.geekbuying.com/go/727rAkdN
Amazon: amzn.to/3wajTsS
Aliexpress: s.click.aliexpress.com/e/_9z39Xg
Or get the improved version, the Sculpfun S30 with air assist: shrsl.com/40y0l
USE PROPER LASER SAFETY GLASSES (O.D 6+):
hobbylasercutters.com/go/best... (you only have two eyes!)
Learn more about the air assist in this video: • How Does Air Assist He...
X-axis upgrade kit: s.click.aliexpress.com/e/_DEK...
*The links can be affiliate links. I earn a small commission at no extra cost to you, which helps me to run this channel and provide all these extensive reviews and discounts to you for free, without any paid membership.
"Laser engravers are getting more and more capable these days. I know what you're thinking, "I am not a maker, I don't need to be reading this." Okay, but bear with me for a second. There has never been a better time to get into laser engraving because the machines have gotten so much easier to use in recent years. You can do so many laser cutting projects at home with this amazing Sculpfun S9 laser engraving machine!
The technical review of this machine: hobbylasercutters.com/sculpfu...
You can find more info (including the design files and box generators) on these projects here: hobbylasercutters.com/10-amaz...
These top 10 incredible thinks can be made using only laser engraver and these are the 10 reasons why you need it.
These project ideas are about laser cutting, laser engraving, laser engravers and laser cutters.
The Sculpfun S9 is a brand new high end laser engraver that was just released! It is so capable that we should call it a proper laser cutter. Its special feature is that it can cut thick materials with ease thanks to its special optics. If you want to see my technical test of this machine, check my website and you will be able to compare the Sculpfun S9 performance to the Sculpfun S6 Pro and Atomstack A5 Pro.
My other video reviews:
Sculpfun S6 pro review: • SCULPFUN S6 PRO REVIEW...
Sculpfun S6 Pro vs S6: • SCULPFUN S6 PRO vs S6 ...
0:00 Intro
0:55 Number 10
2:10 Number 9
2:53 Number 8
3:50 Number 7
5:13 Number 6
5:59 Number 5
7:07 Number 4
8:14 Number 3 (My favourite)
10:03 Number 2
11:21 Number 1
12:31 Technical test results of this laser machine
I hope you enjoyed this video.
And click that LIKE button! It helps a lot!
BUT DO NOT CLICK THIS - bit.ly/2BYOIoR
Subscribe for more and tell me in the comments what you like the most or what should I create next.
Follow me on Facebook and Instagram
/ jtmakesit
/ jt_makes_it
for spoilers on what I am currently working on, behind the scenes and other extras!
I get my music from here: bit.ly/2U8HISX
#sculpfun #laserengraver #sculpfuns9 - Навчання та стиль
If you find this machine interesting, you can get it through this links:
Official store: shrsl.com/45klk
Or here: bit.ly/3JdGoEe (package with air assist pump!)
or here: hobbylasercutters.com/go/sculpfun-s9/
Use my coupon "BGdedaba" and get it for only 189$!
Or here: www.geekbuying.com/go/727rAkdN
Or get the improved version, the Sculpfun S30 with air assist: shrsl.com/40y0l
(Affiliate link, I get a small commission at no extra cost to you. This enables me to get better coupons in the future so you can have even lower prices with my coupons!)
If you want to upgrade your existing laser check the replacement laser head only:
hobbylasercutters.com/go/sculpfun-s9-head/
Air assist also available!
It can be make watches main plate
Please reply
@@ARSHADPATHAN-ym4je what kind of material?
Aluminium or stainless steel
I love the steel "waste" plate! The idea of holding the materials like paper and leather down with just a few high-power magnets, very cool!
Thanks! Its cheap and it works!
Thank you so much for choosing Sculpfun!!!🥰
Amazing review! Thank you very much for your good work!
Hello. I was looking for information on the Internet on the Sculpfun S9 laser. You did very good materials that helped me choose to buy Sculpfun S9. Thank you very much. Greetings from Poland. Arthur
Thank you very much for the information, was really helpful.
Some awesome ideas here, i'll definitely be taking some inspiration!
Tip, if you poly, or poly stain your wood first, then laser etch and cut, you are able to remove the burn halos using alcohol and a cloth... It's also easier to brush poly the entire wood before it's cut or etched. Then you can still use the spray after the cleanup for a final coat...
That sounds like a good tip. Do you have a recomendation for the type of poly to use? I've just ordered the S9 and really looking forward to start using it.
@@tlwestre any poly will do...
Sorry guys, but what is "poly"?
@@asa100 polyurethane coating, like a finisher
I’d recommend water based Polyurethane (Ie: polycrilic) because it doesn’t yellow like oil based. Just make sure you stir and don’t shake because you will introduce a ton of micro bubbles in the finish. I also don’t like foam brushes for the same reason.
I've got an S6 and while I absolutely love it, I find the horizontal cut to be significantly wider than the vertical. Im considering buying the S9 module. Looks significantly better
excellent laser that cuts even thick materials, thanks to the narrow focal point, certainly the best for value for money
Great work JT !
Best Ideas for Use of Laser Cutting Machines !!
Hello I wanted to ask what software program you use and with what settings you cut acrylic because it doesn't work for me. Thank you!
Thank you very much for your great review, has ordered the S9 from Banggood with you coupon you provided.
Thank you!
@@JTMakesIt Sorry that i might have to cancel the order from Banggood, order placed after 3 weeks, Banggood keeps extending the shipping date everyday.
@@alancheng7952 demand is high for the S9, this is why shipping is delayed.
The little box case very nice.
You don't need spraypaint to engrave into Stainless Steel, but it does help sometimes. I've found certain stainless engraves really well without paint, while others don't- I think thickness and exact composition of the metal is what makes the difference.
Watched this video 3 times. Still love some of the 'Things'. Thanks
Thank you!
What's the best balsa wood size ( thickness ) for making small n scale buildings with?
So dope I dident know it can cut. To. Not just wood burn or engrave
very nice video, keep up the good work :)
Thanks for sharing all of these very accurate tests. I'm trying to start with a decent price-quality device. The grayscale test says a lot about how good this equipment is compared to other devices.
Does the roller system for cans or glasses fit on this tool?
The Sculpfun is the best for engraving. Very fine spot and great details.
There will soon be a roller system from Sculpfun. But I think Atomstack one should also work.
Great job again 👍🏼
Thanks for watching! You are awesome!
👏🏾👏🏾Congratulations, perfect job, I'm setting up a craft shop, this machine will help us a lot.
Gained one more subscriber.🤝🏾🇧🇷
Awesome thanks!
Thanks for all information dude 👍 I'm your subscriber now🤝😍
Awesome!
Awesome video and chanel, thanks!
Thanks! You are awesome too :)
Have you tried cutting clear acrylics? Or the colored transparent ones?
Glad I seen this video, I was gonna order a different one
Thanks for the video!
Did you cut plywood in jsut one pass? What speed (mm/s)?
No I used multiple passes at 600mm/min. You can see how this machine performs for cutting here: hobbylasercutters.com/sculpfun-s9/
Absolutely brilliant machine and I love the boxes, can you tell me if you could engrave on clear acrylic with this machine?
You can, but you need to paint the surface black to make it work. But you can use watercolors which can be removed easily after engraving.
Qual aplicativo Você usou para testar a Sculpfun S9 ? Obrigado e excelente vídeo.
I used Lightburn software
Sehr gut Herr T.
Great examples of projects! Do you share the lightburn design files for these? I only found the test file on the blog post. I was wondering about speeds and settings for engraving and cutting the tear-off ticket project
Hi, on my website I have an article with more descriptions next to each project found in this video. For some designs I also posted the vector files. I didn't attach lightburn files for everything, because you need to adjust all the settings according to the material you use. But if you really want the lightburn file for the ticket, send me an email and I will sent it to you. I think everyrhing was done with 600mm/min. 100% power for cutting (1 pass) and about 40% power for text and photo engraving. Perforation was done by enabling perforation mode for one layer in Lightburn
Sir your video very good..very happy when watch your video.If have questions can I ask you sir s9?
Outstanding info. tutorial!! I’ve been looking into an engraver for quite some time. I’m just having a hard time choosing between a laser vs “spindle”. I need some flexibility as well as ability to engrave on metal..
TY for the great input!
You're welcome!
Two questions. First, can you or do you post your test file. Yours is the best I have seen. Second, I see that the laser is expandable if you buy extended aluminum rails. But, what belts does it take and where could you get them? I would assume you would need new belts to make it bigger. Thanks!
I have made a form so everyone could download the test file here: hobbylasercutters.com/download-test-files/
As for the extension I have just asked the manufacturer how this works and where to get parts and I will let you know soon.
I have asked the manufacturer and they said they will soon be selling the extension components for this machine
Hola, Excelente Video!!! Disculpa puedo poner el Modulo Sculpfun S9 en una Ortur Master 2. Gracias
If your machine is powered by 12V (regular Ortur laser Master 2) it could work. But I am not 100% sure because I don't have that machine. For Ortur laser master 2 Pro it will not work because the machine is 24V.
Thanks for the great video reviews and your website. I decided on the new S9 based off your videos. I ordered using your code, saved me $50! So excited to try this thing out!
Cool! Thanks and happy engraving :)
Teria como fazer um video com ela cortando e gravando em acrilico ?ou ao menos deixa as configuracoes ?Would it be possible to make a video with her cutting and recording in acrylic ?or at least leave the settings?
Check the video description for a link to a written website article where acrylic cuttig test was made.
Subscribed! I’m engraving everything!
Awesome! 🔥
Hello, thank you for your video. Could you tell me how long it took to cut the bottom of the clock (3) and in how many passes. Thank you for your answer
Thanks for watching! I don't remember exactly, but 600mm/min and 6 passes took 45min approximately. It would cut it in way less passes but I always set more passes just to be sure. There is always a stubborn patch of glue somewhere in this wood.
Bonjour, super travail. Quels paramètres avez vous mis pour la découpe du Nombre 2 et quel type et épaisseur de bois avez-vous utilisé. Merci de votre réponse
Thanks! Check the video description to my website article. You will find all the information there.
@@JTMakesIt merci.
So funny, btw, your works are so nice!
Thanks!
What is the acrylic ran that can be cut in the machine knowing that I have 2 mm white acrylic but it has not been cut. I don't know why I hope you help me. Thank you
White and transparent acrylic can't be cut with diode lasers
essa madeira que mostra a cortar é com a máquina s9? como é que eu com uma maquina s10 10W não consigo cortar madeira de 8 mm?, a fonte de alimentação deve ser igual á minha "12V 3Amperes, e eu já tive que substituir a fonte por ele não aguentar, a maquina a cortar ela debita 8Amp, como é possivel mostrar essa maquina a cortar madeira que eu acho que tem mais de 6 mm, por favor diga-me
It depends on the type of wood. Here I was cutting a very soft and light wood. Harder and denser woods are much harder to cut and take much more power.
Hi everyone,
I have an Anycubic mega S,
I'd like to buy, install and use the laser engraving. Is it that possible? Is it enough and possible to replace the firmware with the mega pro and is it available to download?
Thanks.
Hi JT,
I am considering buying this. Can I also make rubber templates with this sculpfun S9 that I can use to apply structures, mandalas, etc. in clay?
Yes you can
Great review, and one of the few I can find. Do you recommend this laser over the Ortur Master 2 Pro?
If you want more cutting power then choose S9. Ortur has better mechanics, but weaker laser.
Love the vid how can it cut 10mm mdf? If so how many passes you think I'll neeed?
Thanks for watching! I have never tried cutting MDF, so I can't say it, but the 10mm is about the practical maximum for softer woods. For 10mm Poplar plywood it takes around 20-25 passes at 600mm/min. I think it would need quite a lot of passes. You can go slower and use much less passes, but there would be more charring. For fast cutting of thick boards, you would need much more expensive machine.
Thank you for your review on the product. I am looking for a laser cutting machine that cuts 2mm thick royal board thick paper with having the paper burnt while laser cutting it in close. i need to cut 2~10 mm thick acrylics for my architectural scale models. is there it for me?
It should br able to cut 2mm paper. The only problem I see is in acrylic. It depends on what color it is. Black acrylic is the easierst to cut but 10mm thick is the very maximum for all machines and they will cut it very slowly. None of the machines will be able to cut transparent acrylic, for it you would need a different kind of laser
Will it be good mainly for imprinting stainless steel/metal bracelets? Do you recommend something else? Can you do on a round surface like cups?
Check out my last video. The machine I reviewed is just what you need
Is this better than the s30 pro?
Is this brand better than neje?
I currently got my first laser and I got the neje 3plus but having trouble with it. Thinking of switching to another. Any recommendations?
This is the predecessor to the S30. It is half the power of the S30 pro. I like it way more than the Neje. If you want to compare different machines check my reviews:
hobbylasercutters.com/laser-reviews/
or watch my other videos.
Hey That's a great video and very helpful but I have a question
What is that black sheet under the machine ?
And where can I buy them ?
That is a regular 2mm thick mild steel plate I ordered at a local metalworking shop. It is great because you can fix things with magnets. But with the machine you get a small steel plate as well which is good for a start.
@@JTMakesIt thank you so much ♥
Hey, great content. What is the cutting surface material that you use ? I can´t quite tell. Is it just a steel plate ?
Thanks! Its a regular 2mm thick mild steel plate
Hey! First, thanks for the amazing video!
Second, what SW do you use with your laser engraver? I use LaserRGBL, but it seems a bit limited...
Hi! Thanks! I use Lightburn. It is very good and saves a lot of time. You can try it out with a 30 day free and fully featued trial.
Hello it's just unbelievable. Where can I found this machine
@@invictus7882 There is a link in the video description
Super machine 👽👍
How does this laser compare to the Atomstack A5 pro plus? As far as I have read, both have the improved focusing and now the Atomstack has thumb screws to fix the laser head. How would you compare the two?
Hi, I haven't tested the Atomstack A5 pro plus, so I can't say which one is better. Whey should be somewhat similar. BubI don't like the Atomatack light ahield design because it does not allow you to lower the head more than optimal focus. It comes very handy to lower the head a few mm more than normal when cutting thicker materials.
Wow, saludos desde MEXICO 🇲🇽 quiero construir una máquina laser como esa, de que potencial es el láser? Cuales son sus características? Me ayudarías mucho con esa información 😁 así podría hacer un negocio que tengo en mente
You will find all the necessary info in the video description.
Will the S9 module work as a replacement for the Atomstack A5 20w which only has 4.5 optical power? Even though the 4.5 optical power is great for detail it takes several passes to cut leaving my edges way too charred.
S9 module is an amazing upgrade to the A5 20w. The difference is like night and day!
Hello, JT!
Your videos are very good, your approach on this subject is great, I was in doubt which laser to buy, but my doubt was solved, I'm going to buy the Sculpfun S9, I'm a hobbyist.
Keep producing good videos, you gained another subscriber on your channel!
Please, JT, what are the measurements of these magnets you use?
Stay tuned!
Thanks!!!
Thanks you are awesome! I mostly use 3mm thick round neodymium magnets with 20mm diameter. These are strong enough for straightening the bent 3mm plywood. But I also have some smaller 10mm round and 2mm tall ones which are good for thinner stuff like paper
Hi are you able to use a rotary attachment to do cups and glasses with the Sculptfun S9?
Sculpfun will soon release their own rotary attachment. But the one from Atomstack might also work, but I haven't tried it yet so I'm not sure.
@@JTMakesIt I have an update. I Recieved the sculpfun s9. It is a very nice machine. Your burn test worked great. I am. I'm waiting for the rotary attachment from atomstack now. Thanks for making the videos, keep up the amazing work.
Verry good👍👍👍🇳🇱
Greats from Holland
I wanted to know the lasers watts on it? please cause cause I've seen all the links and comparing prices then I see a link that its about upgrading the laser ?..is it 90w or not ...?
Check my latest video, I was measuring optical power of all my laser engravers
Hello, I don't understand one thing, with the Laser GBRL program I must first make an incision and then the perimeter cut ...... how can I do it? It practically cuts me even what it just has to engrave......help me plese
If yo uwant to enrave, you should do the same as cutting, just less power
you can help me choose which one I have to buy laser engraver that engraves and is more precise, I don't care about the cut but the engraving between which to choose ATOMSTACK S10 PRO 50W or Atomstack X7 Pro 50W or laser SCULPFUN S10 thanks
The SculpfunS10 has more stable and precise X-axis mechanics. You can also find a discount coupon for it here: hobbylasercutters.com/coupons/
Great video man!!! Can you tell me what specs did you use cutting the leather? I mean the speed, power and passes. Thanks!
Thanks! Check the video description for an article on my website. You will find all information there including the Lightburn files
Could you show us how good the sculpfun s9 is at cutting gaskets in different thickness gasket material?
I could try, but gasket material is very different for each application.
Hello nice video
do you cut mdf? how much deep you can cut? In this S9
Haven't tried mdf yet but I think 5mm should be no problem.
Very informative and helpful video.
The following questions from a technical point of view:
1) is the Laser Module 90w replaceable if it is defective? if so, where do you get these laser modules?
2) can you also operate a 60w laser module with an S9? or is the electronics (CNC control board) designed accordingly? maybe this question has already been asked in this chat ...
3) same question as 1) for the CNC control board?
Thank you for your effort and a lot of work
Hi, the module is easily replacable and upgradable. It takes a less than a minute to remove the head. The s6 and s9 heads are interchangable and so are the driver boards. Mechanically the are also the same.
The replacement/upgrade heads will probably be listed on banggood. But the life span of the head should be very long.
@@JTMakesIt Super cool and thanks for the quick reply! i will order this device with your proposed coupon and i will be very happy to use your advice!
I discovered that one side can be extended. do you maybe also know how big this is offered?
I am happy to watch your well-structured and well-thought-out lectures again and again.
Likewise, I plan the housing like you did in the other video's. Do you have may be plans or a list of components for this?
It's just a lot of fun to be here !!
@@gdinternationalpmjr3338 Thank you for watching! It is a pleasure working long hours and producing videos that people like you excited and happy :)
I do not know about the extension, but on their site they say that that aluminum profile is standard and I guess you can extend it as long as you like. You would just need to purchase longer belts and cabling would also need to be extended. Maybe they will sell extension kit in the future. But this laser as it is is still very big.
As for the ventilation box, I do not have plans and component lists because I built it from the parts I had at hand. I think it is not the best design, but its the best for the materials I had available :) In some of the first videos with laser box I have a link in the description where you can find some more photos with some basic dimensions.
Thanks for being awesome and enjoying my videos :)
Hi, Some update! Now you can get replacement laser head for S9 here:
hobbylasercutters.com/go/sculpfun-s9-head/
They also have replacement head for S6 and S6 Pro. The heads fit on most laser machines - Atomstack, Ortur, Eleksmaker...
@@JTMakesIt Thank you for your great info and for thinking of me!
I will definitely buy this set including the whole machine. I started planning the electronic controls for the fans and sensor detectors for the housing. It will probably be a few more days until the real thing from Sculpfun S9 is there!
I followed the link to the plans for the Flex Box with living hinge & round corners. I don't think the plan at that link is the one you made in the video. I would really like to make your #2 project.
What settings do you use for the denim engraving? (I have the same machine)
I don't remember the exact numbers, but I use the lowest possible power that gives you results, because you can quickly burn through. It should be around 30-40% power at around 1000-1500mm/min.
The number should be a bit different for various kinds of denim.
Another question, in LaserGbrl software where set the deep of laser to cut, bend and engrave?
You adjust the height of the laser by moving the module physically up or down. By adjusting the height you set the height at which the laser will be in focus.
hello
What are the settings for cutting MDF wood 3 mm on the Lightburn program
Haven't tried it yet, but you should start with 600mm/min and full power set enough passes until it cuts through.
I really enjoyed your video..😁😁. but I have a question can you do a tutorial how correctly clean lens...I'm a little clumsy and I'm afraid I can use what I shouldn't or press something what I shouldn't too...😉
You can easily clean the lens with cotton swab (q-tip) dipped in isopropyl alcohol and gently wiping the lens with it. Isopropyl alcohol evaporates cleanly and does not leave marks. You will see how I clean the lens in my next video which comes out in a few days.
Hola, tengo un sculpfun sp e intento grabar y cortar acrilico de 3 mm transparente me podrias recomendar alguna configuracion para grabar y cortar
Full power and 600mm/min. But you need to paint the acrylic with black paint before engraving. After engraving you can remove the paint.
@@JTMakesIt Gracias!!! voy a intentar
Bom vídeo, gostaria de saber o nome daquele produto que vc usou para pintar o metal.
Cheap black spray paint
i have this machine and just realized was not fully utilizing it ...thanks to JT
You're welcome:)
Thanks fir sharing. I'm curious to know how many passes it took to cut 10mm wood?
Thanks. It takes around 25 passes
@@JTMakesIt much appreciated 🙏
Watching from South Africa 👍
What do you recommend the sculpfun s9 or the ortur pro LF laser or the atomstack A5 pro plus the new one
Thank you
For me personally the S9, because it is the best at cutting
Did you test the atomstack A5 pro plus the new one ?
@@karimmradradwan4449 No, I haven't. There are too many new lasers, I can't keep up with all of them and test them all :) maybe I will soon be able to test it
thanks for the review. do you know if S6 Pro will be upgradable to S9 by just buying the S9's laser head? as the mechanical part looks the same, and maybe the motherboard too
Thanks for watching! The laser heads are compatible between these machines. I tried using the S6 Pro head on this machine and it worked.
@@JTMakesIt thanks for the reply. hopefully they'll sell the S9 laser head alone soon, so I can upgrade my S6 Pro ;-)
This is EXACTLY what I came to know!
How many passes for each material? It's important to know that.
@@DanielH You can get all the needed info here: hobbylasercutters.com/sculpfun-s9/
Hello, how many power and speed and interval should I put to engrave on the glass
100% power and slow speed around 300mm/min. It helps to first paint the glass black.
Ok thank you
Hi I am new to laser printing I am just wondering can I use any brand y axis rotary wheel with the sclupfun laser printer as I have seen the ortur ones and they make thier own rotary wheels
So could I use a ortur rotary with sculpfun printer
I think I can but just making sure
I am not sure about the Ortur one fitting to the Sculpfun. At least the Laser Master 2 Pro has 24V power supply instead of the 12V others use. But I haven't tried any rollers yet. I think the Atomstack one could work, but the Sculpfun will soon release their own roller, so I think it is the best to wait.
@@JTMakesIt ok thank you
Laser engraver ❤️
What kind of wood do you use for project number 10, and what is the best thickness for this project
3mm thick poplar plywood. Poplar is soft and cheap wood which cuts very well. You can use 4mm or 6mm for a more durable toy.
Nice video. I just bought last week the neje Master 2S Plus with N40630 Laser. Did you compare this laser with s9? Neje claims 7.5W optical power :-D
No I haven't gotten my hands on Neje yet., Maybe sometime I will
it kinda of looks like the master 2s uses a very similar style laser, just ordered a s9 we will see :p
Hi! Can you recommend a machine for engraving on jewelry? 😀 I think it's mostly stainless steel or other popular alloys
This: ua-cam.com/video/OpRa6S7aEo4/v-deo.html
Or this: ua-cam.com/video/LvUuUONVthE/v-deo.html
Hello, how many power, speed and pass should I put to cut PVC?
Full power and speed from 300-600mm/min
Amazing video and machine, good performance and really affordable ! would it be easy to install an air assist ? let us know if you find a nice system ! Thanks for sharing your experience !
Thanks! I will be making an air assist for this laser soon and I will also do some tests to see how it improves performance
@@JTMakesIt be cell I’m
How cut it veneer about 0,5 mm tick. Most the problem that happend the edge are black and buring by light color wood?
It can cut 5mm veneer. But every laser will leave black edges.
What about air assist? Can you have that??
Did you try the Masking tape on the top and then cut?
I would love to purchase this but have some questions: Where would I find patterns? Also how do you transfer patterns to the machine? Would I need a metal surface to make patterns?
check the video description. There is a lot more information on my website hobbylasercutters.com
Would this engrave on brass or other metals other than steel? I'm looking to engrave a brass padlock
I still need to try brass
HI thanks for sharing , did you say you were sharing the box making info?? i looked in comments but couldnt find it :(
In the video description you have a link to my website. I think it is the second link that takes you to an article about these 10 projects. Then scroll to your favourite project and I have links to designs and generators posted there if applicable.
@@JTMakesIt thankyou :D
what settings do you use for the wooden puzzle?
Check the video description
I just bought one Thanks
Please can it use automatic rotary roller .because i don't know anything about lasers before i just subscribe your channel.
@@alakaolushola5556 Sculpfun company will soon release the rotary roller for these machines. I will also review it when it will be available.
Hello. Have you done a review on the xTOOL D1?
Yes, check my other videos
Hello, can I spray it with other colors other than black when I engrave on the glass?
You can, but darker the color, better the result will be.
Thank you very much and sorry for my many questions
hi... what is the parameters that you used to cut the paper with lightburn? thanks
Check the video description for a link to my website. You should find all the information there
You show this cutting plywood in the beginning does it cut plywood, if so, how thick will it cut?
Useful range is up to 10mm thick for poplar plywood.
good
so I just ordered one with your code, I'm super excited for it to arrive and want to know more. I'm going over to your site and reading but anything I should take note on id love to hear :)
Cool! Maybe look some laser engraving and Lightburn or Lasergrbl tutorials online, so you will get a feel how to work with these programs. Just watch out because the Lightburn trial period is only 1 month, so better save that for when your laser arrives. Lasergrbl is free but a bit more complicated to use
@@JTMakesIt thanks i have been watching a ton of videos on software im going to give them all a shot sooner or later. I 3d print and have found all slicers are not the same .I've been researching lasers for a few months now, first thing I'm doing after I play with it is adding air assist to it I have everything laying around to set it up.
@@GigaVids Cool! I will also make an air assist in the following month or two and post it here. It should benefit the cutting performance of thick materials
@@JTMakesIt PERFECT !!!! also can this laser 1 pass cut 3mm plywood ?
@@GigaVids it can cut in 1 pass at slower speed, but with faster speed and more passes the cut is much cleaner and better looking.
Hello, is this machine capale of engraving sheets of trasparent PMMA?
I haven't tried it, but I think it is possible to engrave the surface, if you paint the surface black with easy to remove paint.