Chewbarka aluminum tags: bit.ly/3UKLUn6 Send an email to "team@ chewbarka .com" (remove the spaces) and say that "JT Makes It" sent you and you will get 25$ free store credit for your first order! Full written review with more information: hobbylasercutters.com/how-to-make-money-with-laser-engraver/ And check the video description for a complete list of laser machines used in this video! I have included some discount codes too!
Videos like this for each item you could maybe put a graphic in the corner of the video with the Power/Speed/Passes ... for instance the tree clock...I would love to know the setting for that....just a suggestion...thanks...
@@illmerica322 I post most of my settings on my website. There is a link in description to an article about this video. But the tree clock was made with the S9 in another project video hobbylasercutters.com/10-amazing-project-ideas/
It was my understanding CO2 lasers have a farther focal distance than diodes, therefore they have a longer "in focus" range than diodes... Think of it like a long hour Glass and a short hourglass. The longer our glass will have more area in the middle than the shorter one. Which is why CO2 lasers can cut thicker material and engrave things with more variance in height than a diode, like tumblers that have the big "step" in the middle.
Once again awsome video Jt! I'm on thoughts of upgrading my sculpfun s9 for my small business.. I do lots of engraving and cutting with 3mm birch plywood.. what would you suggest buying next to save time?!
Thanks! If you like Sculpfun then something from S30 series. Also check the video description for the website article, you will find even more info there :)
Thanks for this, you saved my time in comparisons. Can you tell me what if Fiber Laser can engrave wood or cut also? Cuz I bought one diode engraver and start feeling that I should buy Fiber from the beginning. What I can do in Diode Laser engraver that Fiber can not do? Thanks again...
Fiber lasers can't engrave wood or similar fibrous materials at all. Diode is much better for that. You also can't cut stuff with a fiber laser other than a very thin metals (up to about 0.3mm thick) and it takes many passes. Also check the video description for a link to my website article, there a lot more pros and cons are listed for each laser type.
Excellent video as always! Informative, no waste knowledge, and to the point. . . I always trust your advice and enjoy watching your reviews, though if you do happen to get affiliated/sponsored with someone maybe say it explicitly as transparency matters a lot these days!! Just a thought.
Thanks! There is a disclaimer in the video description. But I always make my videos unbiased. I never agree to any obligations about what to say in the video :)
Diode lasers can't cut transparent and white acrylic. But K40 is a terrible laser. Cheap but very small and needs a lot of tinkering to make it work well. You should check my reviews of CO2 lasers.
You should advertise engraving custom anniversary gifts and wedding stuff. I get tons of requests all the time and I don't even advertise. Just requests from friends and people I know.
@@JTMakesIt I did... also put things on ebay.. only things i do is for friends and family... maybe somwhere else you can sell it, but in germany the people pay double price and buy it from a company... i can even make shirts with my laser engraver...you cannot see a differens when you buy it in store... anyway...i will not give up...someday i will have a great idea and get the richest man in the world 😂
The whole optical power vs total power thing is fucking me up and making it very difficult to shop for this shit, Why can't they just agree on one standard for advertising their shit?
@@JTMakesIt so I received a free "40watt" Tool head only laser but it is really 5.5 Watt optical power Do you have any suggestions for what to buy to mount it on? I also have an ender 3 pro I haven't unboxed yet because I ended up getting a v2neo and. V3 SE , could I or should I use the 3 pro or make a DIY Setup? This laser says 12 volts I think the ender uses 24 , I was thinking of using a buck converter to step it down. If I end up using the ender But I would like something with a larger work area but I can't seem to find any machines for sale on the usual places like AliExpress that you can buy without the tool head which I find weird because they have tons of tool heads only for sale
@@anthonyrossetti7509 What brand of head did you get? I think most of the heads need power(12V or 24V) and 1kHz PWM signal (probably 5V) where duty cycle corresponds to power percentage output
@@JTMakesIt It says " AENBUSLM 40W (5.5w Output Optical Power) Laser Engraving Module, 450nm Laser Head with air assist" I am just looking to get my feet wet and learn lightburn for now How much would I need to spend for a machine to mount this thing to it is it not even worth it to bother with? Could I use my ender 3 pro or do you have any better suggestions for a machine with no tool head
@@anthonyrossetti7509 you can get 5W engravers for under 250$ with laser module inclued. Maybe try to search for used machines and get it even cheaper.
Chewbarka aluminum tags: bit.ly/3UKLUn6
Send an email to "team@ chewbarka .com" (remove the spaces) and say that "JT Makes It" sent you and you will get 25$ free store credit for your first order!
Full written review with more information: hobbylasercutters.com/how-to-make-money-with-laser-engraver/
And check the video description for a complete list of laser machines used in this video! I have included some discount codes too!
Videos like this for each item you could maybe put a graphic in the corner of the video with the Power/Speed/Passes ... for instance the tree clock...I would love to know the setting for that....just a suggestion...thanks...
@@illmerica322 I post most of my settings on my website. There is a link in description to an article about this video. But the tree clock was made with the S9 in another project video hobbylasercutters.com/10-amazing-project-ideas/
Wow… I ordered an S9 but maybe, will buy another fiber soon
purchased a Xtool d1 pro 20w without knowing much about lasers, It has become an obsession.
I know exactly what you mean 😉
I have just received a 10 wat longer ray 5 laser belive from what ive seen to be very powerful for what it is. Any tips on software?? 👍🏴
@@michaelwillson6847 Lightburn
@@JTMakesIt that's what I'm kinda hearing although it's bloody expensive now 😬🏴👍
@@michaelwillson6847 believe me its worth every penny. Otherwise you can use free LaserGRBL
It was my understanding CO2 lasers have a farther focal distance than diodes, therefore they have a longer "in focus" range than diodes... Think of it like a long hour Glass and a short hourglass. The longer our glass will have more area in the middle than the shorter one. Which is why CO2 lasers can cut thicker material and engrave things with more variance in height than a diode, like tumblers that have the big "step" in the middle.
Once again awsome video Jt! I'm on thoughts of upgrading my sculpfun s9 for my small business.. I do lots of engraving and cutting with 3mm birch plywood.. what would you suggest buying next to save time?!
Thanks! If you like Sculpfun then something from S30 series. Also check the video description for the website article, you will find even more info there :)
@@JTMakesIt I'm waiting your review for the s30 ultra..!
@@Georgeprospero This is going to be my next video in a couple of weeks :)
Chewbarka only deals with companies, not private individuals. Just thought your viewers should know...
Great video though
Thank you for this video and also showcasing the different laser from xtool, i had wondered about it and if it was good
Do you mean the infrared module? I did a full review if you want more information:
ua-cam.com/video/clK4vajlSAc/v-deo.html
Thanks for watching :)
@@JTMakesIt Yes exactly that one. Thank you for the video i will check it out :)
Allegedly the lower watt diode lasers Will etch Anodized aluminum.
Anodizing aluminum is as easy as a couple 9v batteries and some baking soda.
5W ones do it with a bit less contrast, but anything stronger does great
Which brand diode lasers have a dynamic power control?
The video is awesome bro! Learned a lot from u....thanks a lot!
Thanks for this, you saved my time in comparisons.
Can you tell me what if Fiber Laser can engrave wood or cut also?
Cuz I bought one diode engraver and start feeling that I should buy Fiber from the beginning.
What I can do in Diode Laser engraver that Fiber can not do?
Thanks again...
Fiber lasers can't engrave wood or similar fibrous materials at all. Diode is much better for that. You also can't cut stuff with a fiber laser other than a very thin metals (up to about 0.3mm thick) and it takes many passes.
Also check the video description for a link to my website article, there a lot more pros and cons are listed for each laser type.
Nice video und great laser cutter! I'm estimating there should be 777.77€ in that box.
Excellent video as always! Informative, no waste knowledge, and to the point.
.
.
I always trust your advice and enjoy watching your reviews, though if you do happen to get affiliated/sponsored with someone maybe say it explicitly as transparency matters a lot these days!! Just a thought.
Thanks! There is a disclaimer in the video description. But I always make my videos unbiased. I never agree to any obligations about what to say in the video :)
@@JTMakesIt Indeed, hence why I know I can trust your opinion!!
@@Mariosyian4ever Thank you!
Awesome Info!🌹
Good reviews
What glasses do you use to protect your eyes?
I posted a link in the video description to the glasses I use
@@JTMakesIt are they O.D 4 or O.D 6
@@Stephenphillips29UK OD6 is much better
Am upgrading my Sculpfun s6 pro laser module to either the s10 or s30 pro both are around $300. Is there one you prefer?
S30 pro is newer version. It should be better I think
is a k40 style co2 laser much better for cutting acrylic than a 20w diode laser ?
Diode lasers can't cut transparent and white acrylic. But K40 is a terrible laser. Cheap but very small and needs a lot of tinkering to make it work well. You should check my reviews of CO2 lasers.
What settings (speed, power, passes) is used to cut the thick wood with the 40W diode?
100% power and 300mm/min for the thickest one. For ABC letters I think it was the same or maybe double the speed
Good video but the auto-voice is trash.
i tried to sell my works in germany...the interes to engraved things is about zero %... unfortunately... and im engraving since 3 years...
You should advertise engraving custom anniversary gifts and wedding stuff. I get tons of requests all the time and I don't even advertise. Just requests from friends and people I know.
@@JTMakesIt I did... also put things on ebay.. only things i do is for friends and family... maybe somwhere else you can sell it, but in germany the people pay double price and buy it from a company... i can even make shirts with my laser engraver...you cannot see a differens when you buy it in store... anyway...i will not give up...someday i will have a great idea and get the richest man in the world 😂
can you ugrade the SCULPFUN S9 5.5W Laser Engraving Machine to another co2 head to cut in clean acryl.
Impossible. CO2 laser is made from totally different parts. You need a huge glass tube and a set of mirrors for deflectig the beam to the laser head.
@@JTMakesIt ty JT and great video.
@@chriswizard4930 thanks!
The whole optical power vs total power thing is fucking me up and making it very difficult to shop for this shit,
Why can't they just agree on one standard for advertising their shit?
Agree, this is why I do my reviews and measure the power
@@JTMakesIt so I received a free "40watt"
Tool head only laser but it is really 5.5 Watt optical power
Do you have any suggestions for what to buy to mount it on?
I also have an ender 3 pro I haven't unboxed yet because I ended up getting a v2neo and. V3 SE , could I or should I use the 3 pro or make a DIY
Setup?
This laser says 12 volts
I think the ender uses 24 , I was thinking of using a buck converter to step it down.
If I end up using the ender
But I would like something with a larger work area but I can't seem to find any machines for sale on the usual places like AliExpress that you can buy without the tool head which I find weird because they have tons of tool heads only for sale
@@anthonyrossetti7509 What brand of head did you get? I think most of the heads need power(12V or 24V) and 1kHz PWM signal (probably 5V) where duty cycle corresponds to power percentage output
@@JTMakesIt It says "
AENBUSLM 40W (5.5w Output Optical Power) Laser Engraving
Module, 450nm Laser Head with air assist"
I am just looking to get my feet wet and learn lightburn for now
How much would I need to spend for a machine to mount this thing to it is it not even worth it to bother with?
Could I use my ender 3 pro or do you have any better suggestions for a machine with no tool head
@@anthonyrossetti7509 you can get 5W engravers for under 250$ with laser module inclued. Maybe try to search for used machines and get it even cheaper.
Lol "25$" on the business card. Lmao. Hayahaha
You lost me with the ai narrator
Sadly, I have to agree. 😔
Agreed
Not everyone is confident or likes their own voice. Type it once and you're done.
Great toy
9:10 anybody using those lasers - that's how you get blind
This is why you always wear OD6 protection glasses on your head when working with these lasers
Why oh why did you go with an AI voice in your video. AI voices are just so horrible to listen to, it's really bad.
Agree. I am not a native English speaker and voice actors are damn expensive :(
Fair enough, all things considered it is a great video. @@JTMakesIt
Many reasons. Confidence, sound of your own voice, type it once and its done. Silly question